/*-
 * See the file LICENSE for redistribution information.
 *
 * Copyright (c) 1996-2002
 *	Sleepycat Software.  All rights reserved.
 */

#include "db_config.h"

#ifndef lint
static const char revid[] = "$Id: lock.c,v 1.1.1.1 2003/11/20 22:13:34 toshok Exp $";
#endif /* not lint */

#ifndef NO_SYSTEM_INCLUDES
#include <sys/types.h>

#include <string.h>
#endif

#include "db_int.h"
#include "dbinc/db_shash.h"
#include "dbinc/lock.h"
#include "dbinc/log.h"
#include "dbinc/txn.h"

static int  __lock_checklocker __P((DB_LOCKTAB *,
		struct __db_lock *, u_int32_t, u_int32_t));
static void __lock_expires __P((DB_ENV *, db_timeval_t *, db_timeout_t));
static void __lock_freelocker
		__P((DB_LOCKTAB *, DB_LOCKREGION *, DB_LOCKER *, u_int32_t));
static int  __lock_get_internal __P((DB_LOCKTAB *, u_int32_t, u_int32_t,
		const DBT *, db_lockmode_t, db_timeout_t, DB_LOCK *));
static int  __lock_getobj
		__P((DB_LOCKTAB *, const DBT *, u_int32_t, int, DB_LOCKOBJ **));
static int  __lock_is_parent __P((DB_LOCKTAB *, u_int32_t, DB_LOCKER *));
static int  __lock_put_internal __P((DB_LOCKTAB *,
		struct __db_lock *, u_int32_t,  u_int32_t));
static int  __lock_put_nolock __P((DB_ENV *, DB_LOCK *, int *, u_int32_t));
static void __lock_remove_waiter __P((DB_LOCKTAB *,
		DB_LOCKOBJ *, struct __db_lock *, db_status_t));
static int __lock_trade __P((DB_ENV *, DB_LOCK *, u_int32_t));

static const char __db_lock_err[] = "Lock table is out of available %s";
static const char __db_lock_invalid[] = "%s: Lock is no longer valid";
static const char __db_locker_invalid[] = "Locker is not valid";

/*
 * __lock_id --
 *	Generate a unique locker id.
 *
 * PUBLIC: int __lock_id __P((DB_ENV *, u_int32_t *));
 */
int
__lock_id(dbenv, idp)
	DB_ENV *dbenv;
	u_int32_t *idp;
{
	DB_LOCKER *lk;
	DB_LOCKTAB *lt;
	DB_LOCKREGION *region;
	u_int32_t *ids, locker_ndx;
	int nids, ret;

	PANIC_CHECK(dbenv);
	ENV_REQUIRES_CONFIG(dbenv,
	    dbenv->lk_handle, "DB_ENV->lock_id", DB_INIT_LOCK);

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;
	ret = 0;

	/*
	 * Allocate a new lock id.  If we wrap around then we
	 * find the minimum currently in use and make sure we
	 * can stay below that.  This code is similar to code
	 * in __txn_begin_int for recovering txn ids.
	 */
	LOCKREGION(dbenv, lt);
	/*
	 * Our current valid range can span the maximum valid value, so check
	 * for it and wrap manually.
	 */
	if (region->stat.st_id == DB_LOCK_MAXID &&
	    region->stat.st_cur_maxid != DB_LOCK_MAXID)
		region->stat.st_id = DB_LOCK_INVALIDID;
	if (region->stat.st_id == region->stat.st_cur_maxid) {
		if ((ret = __os_malloc(dbenv,
		    sizeof(u_int32_t) * region->stat.st_nlockers, &ids)) != 0)
			goto err;
		nids = 0;
		for (lk = SH_TAILQ_FIRST(&region->lockers, __db_locker);
		    lk != NULL;
		    lk = SH_TAILQ_NEXT(lk, ulinks, __db_locker))
			ids[nids++] = lk->id;
		region->stat.st_id = DB_LOCK_INVALIDID;
		region->stat.st_cur_maxid = DB_LOCK_MAXID;
		if (nids != 0)
			__db_idspace(ids, nids,
			    &region->stat.st_id, &region->stat.st_cur_maxid);
		__os_free(dbenv, ids);
	}
	*idp = ++region->stat.st_id;

	/* Allocate a locker for this id. */
	LOCKER_LOCK(lt, region, *idp, locker_ndx);
	ret = __lock_getlocker(lt, *idp, locker_ndx, 1, &lk);

err:	UNLOCKREGION(dbenv, lt);

	return (ret);
}

/*
 * __lock_id_free --
 *	Free a locker id.
 *
 * PUBLIC: int __lock_id_free __P((DB_ENV *, u_int32_t));
 */
int
__lock_id_free(dbenv, id)
	DB_ENV *dbenv;
	u_int32_t id;
{
	DB_LOCKER *sh_locker;
	DB_LOCKTAB *lt;
	DB_LOCKREGION *region;
	u_int32_t locker_ndx;
	int ret;

	PANIC_CHECK(dbenv);
	ENV_REQUIRES_CONFIG(dbenv,
	    dbenv->lk_handle, "DB_ENV->lock_id_free", DB_INIT_LOCK);

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;

	LOCKREGION(dbenv, lt);
	LOCKER_LOCK(lt, region, id, locker_ndx);
	if ((ret =
	    __lock_getlocker(lt, id, locker_ndx, 0, &sh_locker)) != 0)
		goto err;
	if (sh_locker == NULL) {
		ret = EINVAL;
		goto err;
	}

	if (sh_locker->nlocks != 0) {
		__db_err(dbenv, "Locker still has locks");
		ret = EINVAL;
		goto err;
	}

	__lock_freelocker(lt, region, sh_locker, locker_ndx);

err:	UNLOCKREGION(dbenv, lt);
	return (ret);
}

/*
 * __lock_vec --
 *	Vector lock routine.  This function takes a set of operations
 *	and performs them all at once.  In addition, lock_vec provides
 *	functionality for lock inheritance, releasing all locks for a
 *	given locker (used during transaction commit/abort), releasing
 *	all locks on a given object, and generating debugging information.
 *
 * PUBLIC: int __lock_vec __P((DB_ENV *,
 * PUBLIC:     u_int32_t, u_int32_t, DB_LOCKREQ *, int, DB_LOCKREQ **));
 */
int
__lock_vec(dbenv, locker, flags, list, nlist, elistp)
	DB_ENV *dbenv;
	u_int32_t locker, flags;
	int nlist;
	DB_LOCKREQ *list, **elistp;
{
	struct __db_lock *lp, *next_lock;
	DB_LOCK lock;
	DB_LOCKER *sh_locker, *sh_parent;
	DB_LOCKOBJ *obj, *sh_obj;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	u_int32_t lndx, ndx;
	int did_abort, i, ret, run_dd, upgrade, writes;

	PANIC_CHECK(dbenv);
	ENV_REQUIRES_CONFIG(dbenv,
	    dbenv->lk_handle, "DB_ENV->lock_vec", DB_INIT_LOCK);

	/* Check if locks have been globally turned off. */
	if (F_ISSET(dbenv, DB_ENV_NOLOCKING))
		return (0);

	/* Validate arguments. */
	if ((ret = __db_fchk(dbenv, "DB_ENV->lock_vec",
	    flags, DB_LOCK_FREE_LOCKER | DB_LOCK_NOWAIT)) != 0)
		return (ret);

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;

	run_dd = 0;
	LOCKREGION(dbenv, (DB_LOCKTAB *)dbenv->lk_handle);
	for (i = 0, ret = 0; i < nlist && ret == 0; i++)
		switch (list[i].op) {
		case DB_LOCK_GET_TIMEOUT:
			LF_SET(DB_LOCK_SET_TIMEOUT);
		case DB_LOCK_GET:
			ret = __lock_get_internal(dbenv->lk_handle,
			    locker, flags, list[i].obj,
			    list[i].mode, list[i].timeout, &list[i].lock);
			break;
		case DB_LOCK_INHERIT:
			/*
			 * Get the committing locker and mark it as deleted.
			 * This allows us to traverse the locker links without
			 * worrying that someone else is deleting locks out
			 * from under us.  However, if the locker doesn't
			 * exist, that just means that the child holds no
			 * locks, so inheritance is easy!
			 */
			LOCKER_LOCK(lt, region, locker, ndx);
			if ((ret = __lock_getlocker(lt,
			    locker, ndx, 0, &sh_locker)) != 0 ||
			    sh_locker == NULL ||
			    F_ISSET(sh_locker, DB_LOCKER_DELETED)) {
				if (ret == 0 && sh_locker != NULL)
					ret = EINVAL;
				__db_err(dbenv, __db_locker_invalid);
				break;
			}

			/* Make sure we are a child transaction. */
			if (sh_locker->parent_locker == INVALID_ROFF) {
				__db_err(dbenv, "Not a child transaction");
				ret = EINVAL;
				break;
			}
			sh_parent = (DB_LOCKER *)
			    R_ADDR(&lt->reginfo, sh_locker->parent_locker);
			F_SET(sh_locker, DB_LOCKER_DELETED);

			/*
			 * Now, lock the parent locker; move locks from
			 * the committing list to the parent's list.
			 */
			LOCKER_LOCK(lt, region, locker, ndx);
			if (F_ISSET(sh_parent, DB_LOCKER_DELETED)) {
				if (ret == 0) {
					__db_err(dbenv,
					    "Parent locker is not valid");
					ret = EINVAL;
				}
				break;
			}

			for (lp = SH_LIST_FIRST(&sh_locker->heldby, __db_lock);
			    lp != NULL;
			    lp = SH_LIST_FIRST(&sh_locker->heldby, __db_lock)) {
				SH_LIST_REMOVE(lp, locker_links, __db_lock);
				SH_LIST_INSERT_HEAD(&sh_parent->heldby, lp,
				    locker_links, __db_lock);
				lp->holder = sh_parent->id;

				/* Get the object associated with this lock. */
				obj = (DB_LOCKOBJ *)((u_int8_t *)lp + lp->obj);

				(void)__lock_promote(lt, obj,
				    LF_ISSET(DB_LOCK_NOWAITERS));
			}

			/* Transfer child counts to parent. */
			sh_parent->nlocks += sh_locker->nlocks;
			sh_parent->nwrites += sh_locker->nwrites;

			/* Now free the original locker. */
			ret = __lock_checklocker(lt,
			    NULL, locker, DB_LOCK_IGNOREDEL);
			break;
		case DB_LOCK_PUT:
			ret = __lock_put_nolock(dbenv,
			    &list[i].lock, &run_dd, flags);
			break;
		case DB_LOCK_PUT_ALL:
		case DB_LOCK_PUT_READ:
		case DB_LOCK_UPGRADE_WRITE:
			/*
			 * Get the locker and mark it as deleted.  This
			 * allows us to traverse the locker links without
			 * worrying that someone else is deleting locks out
			 * from under us.  Since the locker may hold no
			 * locks (i.e., you could call abort before you've
			 * done any work), it's perfectly reasonable for there
			 * to be no locker; this is not an error.
			 */
			LOCKER_LOCK(lt, region, locker, ndx);
			if ((ret = __lock_getlocker(lt,
			    locker, ndx, 0, &sh_locker)) != 0 ||
			    sh_locker == NULL ||
			    F_ISSET(sh_locker, DB_LOCKER_DELETED))
				/*
				 * If ret is set, then we'll generate an
				 * error.  If it's not set, we have nothing
				 * to do.
				 */
				break;
			upgrade = 0;
			writes = 1;
			if (list[i].op == DB_LOCK_PUT_READ)
				writes = 0;
			else if (list[i].op == DB_LOCK_UPGRADE_WRITE) {
				if (F_ISSET(sh_locker, DB_LOCKER_DIRTY))
					upgrade = 1;
				writes = 0;
			}

			F_SET(sh_locker, DB_LOCKER_DELETED);

			/* Now traverse the locks, releasing each one. */
			for (lp = SH_LIST_FIRST(&sh_locker->heldby, __db_lock);
			    lp != NULL;) {
				sh_obj = (DB_LOCKOBJ *)
				    ((u_int8_t *)lp + lp->obj);
				if (writes == 1 || lp->mode == DB_LOCK_READ) {
					SH_LIST_REMOVE(lp,
					    locker_links, __db_lock);
					sh_obj = (DB_LOCKOBJ *)
					    ((u_int8_t *)lp + lp->obj);
					SHOBJECT_LOCK(lt, region, sh_obj, lndx);
					/*
					 * We are not letting lock_put_internal
					 * unlink the lock, so we'll have to
					 * update counts here.
					 */
					sh_locker->nlocks--;
					if (IS_WRITELOCK(lp->mode))
						sh_locker->nwrites--;
					ret = __lock_put_internal(lt, lp,
					    lndx, DB_LOCK_FREE | DB_LOCK_DOALL);
					if (ret != 0)
						break;
					lp = SH_LIST_FIRST(
					    &sh_locker->heldby, __db_lock);
				} else
					lp = SH_LIST_NEXT(lp,
					    locker_links, __db_lock);
			}
			switch (list[i].op) {
			case DB_LOCK_UPGRADE_WRITE:
				if (upgrade != 1)
					goto up_done;
				for (lp = SH_LIST_FIRST(
				    &sh_locker->heldby, __db_lock);
				    lp != NULL;
				    lp = SH_LIST_NEXT(lp,
					    locker_links, __db_lock)) {
					if (ret != 0)
						break;
					lock.off = R_OFFSET(&lt->reginfo, lp);
					lock.gen = lp->gen;
					F_SET(sh_locker, DB_LOCKER_INABORT);
					ret = __lock_get_internal(lt,
					    locker, DB_LOCK_UPGRADE,
					    NULL, DB_LOCK_WRITE, 0, &lock);
				}
			up_done:
				/* FALL THROUGH */
			case DB_LOCK_PUT_READ:
				F_CLR(sh_locker, DB_LOCKER_DELETED);
				break;

			case DB_LOCK_PUT_ALL:
				if (ret == 0)
					ret = __lock_checklocker(lt,
					    NULL, locker, DB_LOCK_IGNOREDEL);
				break;
			default:
				break;
			}
			break;
		case DB_LOCK_PUT_OBJ:
			/* Remove all the locks associated with an object. */
			OBJECT_LOCK(lt, region, list[i].obj, ndx);
			if ((ret = __lock_getobj(lt, list[i].obj,
			    ndx, 0, &sh_obj)) != 0 || sh_obj == NULL) {
				if (ret == 0)
					ret = EINVAL;
				break;
			}

			/*
			 * Go through both waiters and holders.  Don't bother
			 * to run promotion, because everyone is getting
			 * released.  The processes waiting will still get
			 * awakened as their waiters are released.
			 */
			for (lp = SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock);
			    ret == 0 && lp != NULL;
			    lp = SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock))
				ret = __lock_put_internal(lt, lp, ndx,
				    DB_LOCK_UNLINK |
				    DB_LOCK_NOPROMOTE | DB_LOCK_DOALL);

			/*
			 * On the last time around, the object will get
			 * reclaimed by __lock_put_internal, structure the
			 * loop carefully so we do not get bitten.
			 */
			for (lp = SH_TAILQ_FIRST(&sh_obj->holders, __db_lock);
			    ret == 0 && lp != NULL;
			    lp = next_lock) {
				next_lock = SH_TAILQ_NEXT(lp, links, __db_lock);
				ret = __lock_put_internal(lt, lp, ndx,
				    DB_LOCK_UNLINK |
				    DB_LOCK_NOPROMOTE | DB_LOCK_DOALL);
			}
			break;

		case DB_LOCK_TIMEOUT:
			ret = __lock_set_timeout(dbenv,
			    locker, 0, DB_SET_TXN_NOW);
			region->need_dd = 1;
			break;

		case DB_LOCK_TRADE:
			/*
			 * INTERNAL USE ONLY.
			 * Change the holder of the lock described in
			 * list[i].lock to the locker-id specified by
			 * the locker parameter.
			 */
			/*
			 * You had better know what you're doing here.
			 * We are trading locker-id's on a lock to
			 * facilitate file locking on open DB handles.
			 * We do not do any conflict checking on this,
			 * so heaven help you if you use this flag under
			 * any other circumstances.
			 */
			ret = __lock_trade(dbenv, &list[i].lock, locker);
			break;
#ifdef DEBUG
		case DB_LOCK_DUMP:
			/* Find the locker. */
			LOCKER_LOCK(lt, region, locker, ndx);
			if ((ret = __lock_getlocker(lt,
			    locker, ndx, 0, &sh_locker)) != 0 ||
			    sh_locker == NULL ||
			    F_ISSET(sh_locker, DB_LOCKER_DELETED))
				break;

			for (lp = SH_LIST_FIRST(&sh_locker->heldby, __db_lock);
			    lp != NULL;
			    lp = SH_LIST_NEXT(lp, locker_links, __db_lock)) {
				__lock_printlock(lt, lp, 1);
			}
			break;
#endif
		default:
			__db_err(dbenv,
			    "Invalid lock operation: %d", list[i].op);
			ret = EINVAL;
			break;
		}

	if (ret == 0 && region->need_dd && region->detect != DB_LOCK_NORUN)
		run_dd = 1;
	UNLOCKREGION(dbenv, (DB_LOCKTAB *)dbenv->lk_handle);

	if (run_dd)
		(void)dbenv->lock_detect(dbenv, 0, region->detect, &did_abort);

	if (ret != 0 && elistp != NULL)
		*elistp = &list[i - 1];

	return (ret);
}

/*
 * Lock acquisition routines.  There are two library interfaces:
 *
 * __lock_get --
 *	original lock get interface that takes a locker id.
 *
 * All the work for lock_get (and for the GET option of lock_vec) is done
 * inside of lock_get_internal.
 *
 * PUBLIC: int __lock_get __P((DB_ENV *,
 * PUBLIC:     u_int32_t, u_int32_t, const DBT *, db_lockmode_t, DB_LOCK *));
 */
int
__lock_get(dbenv, locker, flags, obj, lock_mode, lock)
	DB_ENV *dbenv;
	u_int32_t locker, flags;
	const DBT *obj;
	db_lockmode_t lock_mode;
	DB_LOCK *lock;
{
	int ret;

	PANIC_CHECK(dbenv);
	ENV_REQUIRES_CONFIG(dbenv,
	    dbenv->lk_handle, "DB_ENV->lock_get", DB_INIT_LOCK);

	if (IS_RECOVERING(dbenv)) {
		LOCK_INIT(*lock);
		return (0);
	}

	/* Validate arguments. */
	if ((ret = __db_fchk(dbenv, "DB_ENV->lock_get", flags,
	    DB_LOCK_NOWAIT | DB_LOCK_UPGRADE | DB_LOCK_SWITCH)) != 0)
		return (ret);

	LOCKREGION(dbenv, (DB_LOCKTAB *)dbenv->lk_handle);
	ret = __lock_get_internal(dbenv->lk_handle,
	    locker, flags, obj, lock_mode, 0, lock);
	UNLOCKREGION(dbenv, (DB_LOCKTAB *)dbenv->lk_handle);
	return (ret);
}

static int
__lock_get_internal(lt, locker, flags, obj, lock_mode, timeout, lock)
	DB_LOCKTAB *lt;
	u_int32_t locker, flags;
	const DBT *obj;
	db_lockmode_t lock_mode;
	db_timeout_t timeout;
	DB_LOCK *lock;
{
	struct __db_lock *newl, *lp, *wwrite;
	DB_ENV *dbenv;
	DB_LOCKER *sh_locker;
	DB_LOCKOBJ *sh_obj;
	DB_LOCKREGION *region;
	u_int32_t locker_ndx, obj_ndx;
	int did_abort, ihold, on_locker_list, no_dd, ret;

	dbenv = lt->dbenv;
	region = lt->reginfo.primary;
	on_locker_list = no_dd = ret = 0;

	/* Check if locks have been globally turned off. */
	if (F_ISSET(dbenv, DB_ENV_NOLOCKING))
		return (0);

	/*
	 * If we are not going to reuse this lock, initialize the offset to
	 * invalid so that if we fail it will not look like a valid lock.
	 */
	if (!LF_ISSET(DB_LOCK_UPGRADE | DB_LOCK_SWITCH))
		LOCK_INIT(*lock);

	/* Check that the lock mode is valid.  */
	if ((u_int32_t)lock_mode >= region->stat.st_nmodes) {
		__db_err(dbenv, "DB_ENV->lock_get: invalid lock mode %lu",
		    (u_long)lock_mode);
		return (EINVAL);
	}

	/* Allocate a new lock.  Optimize for the common case of a grant. */
	region->stat.st_nrequests++;
	if ((newl = SH_TAILQ_FIRST(&region->free_locks, __db_lock)) != NULL)
		SH_TAILQ_REMOVE(&region->free_locks, newl, links, __db_lock);
	if (newl == NULL) {
		__db_err(dbenv, __db_lock_err, "locks");
		return (ENOMEM);
	}
	if (++region->stat.st_nlocks > region->stat.st_maxnlocks)
		region->stat.st_maxnlocks = region->stat.st_nlocks;

	if (obj == NULL) {
		DB_ASSERT(LOCK_ISSET(*lock));
		lp = (struct __db_lock *)R_ADDR(&lt->reginfo, lock->off);
		sh_obj = (DB_LOCKOBJ *) ((u_int8_t *)lp + lp->obj);
	} else {
		/* Allocate a shared memory new object. */
		OBJECT_LOCK(lt, region, obj, lock->ndx);
		if ((ret = __lock_getobj(lt, obj, lock->ndx, 1, &sh_obj)) != 0)
			goto err;
	}

	/* Get the locker, we may need it to find our parent. */
	LOCKER_LOCK(lt, region, locker, locker_ndx);
	if ((ret = __lock_getlocker(lt, locker,
	    locker_ndx, locker > DB_LOCK_MAXID ? 1 : 0, &sh_locker)) != 0) {
		/*
		 * XXX We cannot tell if we created the object or not,
		 * so we don't kow if we should free it or not.
		 */
		goto err;
	}

	if (sh_locker == NULL) {
		__db_err(dbenv, "Locker does not exist");
		ret = EINVAL;
		goto err;
	}

	/*
	 * Now we have a lock and an object and we need to see if we should
	 * grant the lock.  We use a FIFO ordering so we can only grant a
	 * new lock if it does not conflict with anyone on the holders list
	 * OR anyone on the waiters list.  The reason that we don't grant if
	 * there's a conflict is that this can lead to starvation (a writer
	 * waiting on a popularly read item will never be granted).  The
	 * downside of this is that a waiting reader can prevent an upgrade
	 * from reader to writer, which is not uncommon.
	 *
	 * There is one exception to the no-conflict rule.  If a lock is held
	 * by the requesting locker AND the new lock does not conflict with
	 * any other holders, then we grant the lock.  The most common place
	 * this happens is when the holder has a WRITE lock and a READ lock
	 * request comes in for the same locker.  If we do not grant the read
	 * lock, then we guarantee deadlock.
	 *
	 * In case of conflict, we put the new lock on the end of the waiters
	 * list, unless we are upgrading in which case the locker goes on the
	 * front of the list.
	 */
	ihold = 0;
	lp = NULL;
	if (LF_ISSET(DB_LOCK_SWITCH))
		goto put_lock;

	wwrite = NULL;
	for (lp = SH_TAILQ_FIRST(&sh_obj->holders, __db_lock);
	    lp != NULL;
	    lp = SH_TAILQ_NEXT(lp, links, __db_lock)) {
		if (locker == lp->holder) {
			if (lp->mode == lock_mode &&
			    lp->status == DB_LSTAT_HELD) {
				if (LF_ISSET(DB_LOCK_UPGRADE))
					goto upgrade;

				/*
				 * Lock is held, so we can increment the
				 * reference count and return this lock.
				 * We do not count reference increments
				 * towards the locks held by the locker.
				 */
				lp->refcount++;
				lock->off = R_OFFSET(&lt->reginfo, lp);
				lock->gen = lp->gen;
				lock->mode = lp->mode;

				ret = 0;
				goto done;
			} else {
				ihold = 1;
				if (lock_mode == DB_LOCK_WRITE &&
				    lp->mode == DB_LOCK_WWRITE)
					wwrite = lp;
			}
		} else if (__lock_is_parent(lt, lp->holder, sh_locker))
			ihold = 1;
		else if (CONFLICTS(lt, region, lp->mode, lock_mode))
			break;
	}

	/*
	 * If we are looking to upgrade a WWRITE to a WRITE lock
	 * and there were no conflicting locks then we can just
	 * upgrade this lock to the one we want.
	 */
	if (wwrite != NULL && lp == NULL) {
		lp = wwrite;
		lp->mode = lock_mode;
		lp->refcount++;
		lock->off = R_OFFSET(&lt->reginfo, lp);
		lock->gen = lp->gen;
		lock->mode = lp->mode;

		ret = 0;
		goto done;
	}

	/*
	 * Make the new lock point to the new object, initialize fields.
	 *
	 * This lock is not linked in anywhere, so we can muck with it
	 * without holding any mutexes.
	 */
put_lock:
	newl->holder = locker;
	newl->refcount = 1;
	newl->mode = lock_mode;
	newl->obj = SH_PTR_TO_OFF(newl, sh_obj);
	newl->status = DB_LSTAT_HELD;

	/*
	 * If we are upgrading, then there are two scenarios.  Either
	 * we had no conflicts, so we can do the upgrade.  Or, there
	 * is a conflict and we should wait at the HEAD of the waiters
	 * list.
	 */
	if (LF_ISSET(DB_LOCK_UPGRADE)) {
		if (lp == NULL)
			goto upgrade;

		/*
		 * There was a conflict, wait.  If this is the first waiter,
		 * add the object to the deadlock detector's list.
		 */
		if (SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock) == NULL)
			SH_TAILQ_INSERT_HEAD(&region->dd_objs,
			    sh_obj, dd_links, __db_lockobj);

		SH_TAILQ_INSERT_HEAD(&sh_obj->waiters, newl, links, __db_lock);
		goto llist;
	}

	if (lp == NULL && !ihold)
		for (lp = SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock);
		    lp != NULL;
		    lp = SH_TAILQ_NEXT(lp, links, __db_lock)) {
			if (CONFLICTS(lt, region, lp->mode, lock_mode) &&
			    locker != lp->holder)
				break;
		}
	if (!LF_ISSET(DB_LOCK_SWITCH) && lp == NULL)
		SH_TAILQ_INSERT_TAIL(&sh_obj->holders, newl, links);
	else if (!LF_ISSET(DB_LOCK_NOWAIT)) {
		/*
		 * If this is the first waiter, add the object to the
		 * deadlock detector's list.
		 */
		if (SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock) == NULL)
			SH_TAILQ_INSERT_HEAD(&region->dd_objs,
			    sh_obj, dd_links, __db_lockobj);
		SH_TAILQ_INSERT_TAIL(&sh_obj->waiters, newl, links);
	} else {
		ret = DB_LOCK_NOTGRANTED;
		if (SH_LIST_FIRST(&sh_locker->heldby, __db_lock) == NULL &&
		    LF_ISSET(DB_LOCK_FREE_LOCKER))
			__lock_freelocker(lt, region, sh_locker, locker_ndx);
		region->stat.st_nnowaits++;
		goto err;
	}

llist:
	/*
	 * Now, insert the lock onto its locker's list.  If the locker does
	 * not currently hold any locks, there's no reason to run a deadlock
	 * detector, save that information.
	 */
	on_locker_list = 1;
	no_dd = sh_locker->master_locker == INVALID_ROFF &&
	    SH_LIST_FIRST(&sh_locker->child_locker, __db_locker) == NULL &&
	    SH_LIST_FIRST(&sh_locker->heldby, __db_lock) == NULL;

	SH_LIST_INSERT_HEAD(&sh_locker->heldby, newl, locker_links, __db_lock);

	if (LF_ISSET(DB_LOCK_SWITCH) || lp != NULL) {
		if (LF_ISSET(DB_LOCK_SWITCH) &&
		    (ret = __lock_put_nolock(dbenv,
		    lock, &ihold, DB_LOCK_NOWAITERS)) != 0)
			goto err;
		/*
		 * This is really a blocker for the thread.  It should be
		 * initialized locked, so that when we try to acquire it, we
		 * block.
		 */
		newl->status = DB_LSTAT_WAITING;
		region->stat.st_nconflicts++;
		region->need_dd = 1;
		/*
		 * First check to see if this txn has expired.
		 * If not then see if the lock timeout is past
		 * the expiration of the txn, if it is, use
		 * the txn expiration time.  lk_expire is passed
		 * to avoid an extra call to get the time.
		 */
		if (__lock_expired(dbenv,
		    &sh_locker->lk_expire, &sh_locker->tx_expire)) {
			newl->status = DB_LSTAT_ABORTED;
			region->stat.st_ndeadlocks++;
			region->stat.st_ntxntimeouts++;

			/*
			 * Remove the lock from the wait queue and if
			 * this was the only lock on the wait queue remove
			 * this object from the deadlock detector object
			 * list.
			 */
			SH_LIST_REMOVE(newl, locker_links, __db_lock);
			SH_TAILQ_REMOVE(
			    &sh_obj->waiters, newl, links, __db_lock);
			if (SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock) == NULL)
				SH_TAILQ_REMOVE(&region->dd_objs,
				    sh_obj, dd_links, __db_lockobj);

			/* Clear the timeout, we are done. */
			LOCK_SET_TIME_INVALID(&sh_locker->tx_expire);
			goto expired;
		}

		/*
		 * If a timeout was specified in this call then it
		 * takes priority.  If a lock timeout has been specified
		 * for this transaction then use that, otherwise use
		 * the global timeout value.
		 */
		if (!LF_ISSET(DB_LOCK_SET_TIMEOUT)) {
			if (F_ISSET(sh_locker, DB_LOCKER_TIMEOUT))
				timeout = sh_locker->lk_timeout;
			else
				timeout = region->lk_timeout;
		}
		if (timeout != 0)
			__lock_expires(dbenv, &sh_locker->lk_expire, timeout);
		else
			LOCK_SET_TIME_INVALID(&sh_locker->lk_expire);

		if (LOCK_TIME_ISVALID(&sh_locker->tx_expire) &&
			(timeout == 0 || __lock_expired(dbenv,
			    &sh_locker->lk_expire, &sh_locker->tx_expire)))
				sh_locker->lk_expire = sh_locker->tx_expire;
		UNLOCKREGION(dbenv, (DB_LOCKTAB *)dbenv->lk_handle);

		/*
		 * We are about to wait; before waiting, see if the deadlock
		 * detector should be run.
		 */
		if (region->detect != DB_LOCK_NORUN && !no_dd)
			(void)dbenv->lock_detect(
			    dbenv, 0, region->detect, &did_abort);

		MUTEX_LOCK(dbenv, &newl->mutex);
		LOCKREGION(dbenv, (DB_LOCKTAB *)dbenv->lk_handle);

expired:	/* Turn off lock timeout. */
		LOCK_SET_TIME_INVALID(&sh_locker->lk_expire);

		if (newl->status != DB_LSTAT_PENDING) {
			(void)__lock_checklocker(lt, newl, newl->holder, 0);
			switch (newl->status) {
				case DB_LSTAT_ABORTED:
					on_locker_list = 0;
					ret = DB_LOCK_DEADLOCK;
					break;
				case DB_LSTAT_NOTEXIST:
					ret = DB_LOCK_NOTEXIST;
					break;
				case DB_LSTAT_EXPIRED:
					SHOBJECT_LOCK(lt,
					    region, sh_obj, obj_ndx);
					if ((ret = __lock_put_internal(
					    lt, newl, obj_ndx, 0) != 0))
						goto err;
					if (LOCK_TIME_EQUAL(
					    &sh_locker->lk_expire,
					    &sh_locker->tx_expire)) {
						region->stat.st_ndeadlocks++;
						region->stat.st_ntxntimeouts++;
						return (DB_LOCK_DEADLOCK);
					} else {
						region->stat.st_nlocktimeouts++;
						return (DB_LOCK_NOTGRANTED);
					}
				default:
					ret = EINVAL;
					break;
			}
			goto err;
		} else if (LF_ISSET(DB_LOCK_UPGRADE)) {
			/*
			 * The lock that was just granted got put on the
			 * holders list.  Since we're upgrading some other
			 * lock, we've got to remove it here.
			 */
			SH_TAILQ_REMOVE(
			    &sh_obj->holders, newl, links, __db_lock);
			/*
			 * Ensure that the object is not believed to be on
			 * the object's lists, if we're traversing by locker.
			 */
			newl->links.stqe_prev = -1;
			goto upgrade;
		} else
			newl->status = DB_LSTAT_HELD;
	}

	lock->off = R_OFFSET(&lt->reginfo, newl);
	lock->gen = newl->gen;
	lock->mode = newl->mode;
	sh_locker->nlocks++;
	if (IS_WRITELOCK(newl->mode))
		sh_locker->nwrites++;

	return (0);

upgrade:/*
	 * This was an upgrade, so return the new lock to the free list and
	 * upgrade the mode of the original lock.
	 */
	lp = (struct __db_lock *)R_ADDR(&lt->reginfo, lock->off);
	if (IS_WRITELOCK(lock_mode) && !IS_WRITELOCK(lp->mode))
		sh_locker->nwrites++;
	lp->mode = lock_mode;

	ret = 0;
	/* FALLTHROUGH */

done:
err:	newl->status = DB_LSTAT_FREE;
	region->stat.st_nlocks--;
	if (on_locker_list) {
		SH_LIST_REMOVE(newl, locker_links, __db_lock);
	}
	SH_TAILQ_INSERT_HEAD(&region->free_locks, newl, links, __db_lock);
	return (ret);
}

/*
 * Lock release routines.
 *
 * The user callable one is lock_put and the three we use internally are
 * __lock_put_nolock, __lock_put_internal and __lock_downgrade.
 *
 * PUBLIC: int  __lock_put __P((DB_ENV *, DB_LOCK *));
 */
int
__lock_put(dbenv, lock)
	DB_ENV *dbenv;
	DB_LOCK *lock;
{
	DB_LOCKTAB *lt;
	int ret, run_dd;

	PANIC_CHECK(dbenv);
	ENV_REQUIRES_CONFIG(dbenv,
	    dbenv->lk_handle, "DB_LOCK->lock_put", DB_INIT_LOCK);

	if (IS_RECOVERING(dbenv))
		return (0);

	lt = dbenv->lk_handle;

	LOCKREGION(dbenv, lt);
	ret = __lock_put_nolock(dbenv, lock, &run_dd, 0);
	UNLOCKREGION(dbenv, lt);

	/*
	 * Only run the lock detector if put told us to AND we are running
	 * in auto-detect mode.  If we are not running in auto-detect, then
	 * a call to lock_detect here will 0 the need_dd bit, but will not
	 * actually abort anything.
	 */
	if (ret == 0 && run_dd)
		(void)dbenv->lock_detect(dbenv, 0,
		    ((DB_LOCKREGION *)lt->reginfo.primary)->detect, NULL);
	return (ret);
}

static int
__lock_put_nolock(dbenv, lock, runp, flags)
	DB_ENV *dbenv;
	DB_LOCK *lock;
	int *runp;
	u_int32_t flags;
{
	struct __db_lock *lockp;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	int ret;

	/* Check if locks have been globally turned off. */
	if (F_ISSET(dbenv, DB_ENV_NOLOCKING))
		return (0);

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;

	lockp = (struct __db_lock *)R_ADDR(&lt->reginfo, lock->off);
	LOCK_INIT(*lock);
	if (lock->gen != lockp->gen) {
		__db_err(dbenv, __db_lock_invalid, "DB_LOCK->lock_put");
		return (EINVAL);
	}

	ret = __lock_put_internal(lt,
	    lockp, lock->ndx, flags | DB_LOCK_UNLINK | DB_LOCK_FREE);

	*runp = 0;
	if (ret == 0 && region->need_dd && region->detect != DB_LOCK_NORUN)
		*runp = 1;

	return (ret);
}

/*
 * __lock_downgrade --
 *	Used to downgrade locks.  Currently this is used in two places,
 * 1) by the concurrent access product to downgrade write locks
 * back to iwrite locks and 2) to downgrade write-handle locks to read-handle
 * locks at the end of an open/create.
 *
 * PUBLIC: int __lock_downgrade __P((DB_ENV *,
 * PUBLIC:     DB_LOCK *, db_lockmode_t, u_int32_t));
 */
int
__lock_downgrade(dbenv, lock, new_mode, flags)
	DB_ENV *dbenv;
	DB_LOCK *lock;
	db_lockmode_t new_mode;
	u_int32_t flags;
{
	struct __db_lock *lockp;
	DB_LOCKER *sh_locker;
	DB_LOCKOBJ *obj;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	u_int32_t indx;
	int ret;

	COMPQUIET(flags, 0);

	PANIC_CHECK(dbenv);
	ret = 0;

	/* Check if locks have been globally turned off. */
	if (F_ISSET(dbenv, DB_ENV_NOLOCKING))
		return (0);

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;

	LOCKREGION(dbenv, lt);

	lockp = (struct __db_lock *)R_ADDR(&lt->reginfo, lock->off);
	if (lock->gen != lockp->gen) {
		__db_err(dbenv, __db_lock_invalid, "lock_downgrade");
		ret = EINVAL;
		goto out;
	}

	LOCKER_LOCK(lt, region, lockp->holder, indx);

	if ((ret = __lock_getlocker(lt, lockp->holder,
	    indx, 0, &sh_locker)) != 0 || sh_locker == NULL) {
		if (ret == 0)
			ret = EINVAL;
		__db_err(dbenv, __db_locker_invalid);
		goto out;
	}
	if (IS_WRITELOCK(lockp->mode) && !IS_WRITELOCK(new_mode))
		sh_locker->nwrites--;

	if (new_mode == DB_LOCK_WWRITE)
		F_SET(sh_locker, DB_LOCKER_DIRTY);

	lockp->mode = new_mode;

	/* Get the object associated with this lock. */
	obj = (DB_LOCKOBJ *)((u_int8_t *)lockp + lockp->obj);
	(void)__lock_promote(lt, obj, LF_ISSET(DB_LOCK_NOWAITERS));

out:	UNLOCKREGION(dbenv, lt);

	return (ret);
}

static int
__lock_put_internal(lt, lockp, obj_ndx, flags)
	DB_LOCKTAB *lt;
	struct __db_lock *lockp;
	u_int32_t obj_ndx, flags;
{
	DB_LOCKOBJ *sh_obj;
	DB_LOCKREGION *region;
	int ret, state_changed;

	region = lt->reginfo.primary;
	ret = state_changed = 0;

	if (!OBJ_LINKS_VALID(lockp)) {
		/*
		 * Someone removed this lock while we were doing a release
		 * by locker id.  We are trying to free this lock, but it's
		 * already been done; all we need to do is return it to the
		 * free list.
		 */
		lockp->status = DB_LSTAT_FREE;
		SH_TAILQ_INSERT_HEAD(
		    &region->free_locks, lockp, links, __db_lock);
		region->stat.st_nlocks--;
		return (0);
	}

	if (LF_ISSET(DB_LOCK_DOALL))
		region->stat.st_nreleases += lockp->refcount;
	else
		region->stat.st_nreleases++;

	if (!LF_ISSET(DB_LOCK_DOALL) && lockp->refcount > 1) {
		lockp->refcount--;
		return (0);
	}

	/* Increment generation number. */
	lockp->gen++;

	/* Get the object associated with this lock. */
	sh_obj = (DB_LOCKOBJ *)((u_int8_t *)lockp + lockp->obj);

	/* Remove this lock from its holders/waitlist. */
	if (lockp->status != DB_LSTAT_HELD && lockp->status != DB_LSTAT_PENDING)
		__lock_remove_waiter(lt, sh_obj, lockp, DB_LSTAT_FREE);
	else {
		SH_TAILQ_REMOVE(&sh_obj->holders, lockp, links, __db_lock);
		lockp->links.stqe_prev = -1;
	}

	if (LF_ISSET(DB_LOCK_NOPROMOTE))
		state_changed = 0;
	else
		state_changed = __lock_promote(lt,
		    sh_obj, LF_ISSET(DB_LOCK_REMOVE | DB_LOCK_NOWAITERS));

	if (LF_ISSET(DB_LOCK_UNLINK))
		ret = __lock_checklocker(lt, lockp, lockp->holder, flags);

	/* Check if object should be reclaimed. */
	if (SH_TAILQ_FIRST(&sh_obj->holders, __db_lock) == NULL &&
	    SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock) == NULL) {
		HASHREMOVE_EL(lt->obj_tab,
		    obj_ndx, __db_lockobj, links, sh_obj);
		if (sh_obj->lockobj.size > sizeof(sh_obj->objdata))
			__db_shalloc_free(lt->reginfo.addr,
			    SH_DBT_PTR(&sh_obj->lockobj));
		SH_TAILQ_INSERT_HEAD(
		    &region->free_objs, sh_obj, links, __db_lockobj);
		region->stat.st_nobjects--;
		state_changed = 1;
	}

	/* Free lock. */
	if (!LF_ISSET(DB_LOCK_UNLINK) && LF_ISSET(DB_LOCK_FREE)) {
		lockp->status = DB_LSTAT_FREE;
		SH_TAILQ_INSERT_HEAD(
		    &region->free_locks, lockp, links, __db_lock);
		region->stat.st_nlocks--;
	}

	/*
	 * If we did not promote anyone; we need to run the deadlock
	 * detector again.
	 */
	if (state_changed == 0)
		region->need_dd = 1;

	return (ret);
}

/*
 * Utility functions; listed alphabetically.
 */

/*
 * __lock_checklocker --
 *	If a locker has no more locks, then we can free the object.
 * Return a boolean indicating whether we freed the object or not.
 *
 * Must be called without the locker's lock set.
 */
static int
__lock_checklocker(lt, lockp, locker, flags)
	DB_LOCKTAB *lt;
	struct __db_lock *lockp;
	u_int32_t locker, flags;
{
	DB_ENV *dbenv;
	DB_LOCKER *sh_locker;
	DB_LOCKREGION *region;
	u_int32_t indx;
	int ret;

	dbenv = lt->dbenv;
	region = lt->reginfo.primary;
	ret = 0;

	LOCKER_LOCK(lt, region, locker, indx);

	/* If the locker's list is NULL, free up the locker. */
	if ((ret = __lock_getlocker(lt,
	    locker, indx, 0, &sh_locker)) != 0 || sh_locker == NULL) {
		if (ret == 0)
			ret = EINVAL;
		__db_err(dbenv, __db_locker_invalid);
		goto freelock;
	}

	if (F_ISSET(sh_locker, DB_LOCKER_DELETED)) {
		LF_CLR(DB_LOCK_FREE);
		if (!LF_ISSET(DB_LOCK_IGNOREDEL))
			goto freelock;
	}

	if (LF_ISSET(DB_LOCK_UNLINK)) {
		SH_LIST_REMOVE(lockp, locker_links, __db_lock);
		if (lockp->status == DB_LSTAT_HELD) {
			sh_locker->nlocks--;
			if (IS_WRITELOCK(lockp->mode))
				sh_locker->nwrites--;
		}
	}

	if (SH_LIST_FIRST(&sh_locker->heldby, __db_lock) == NULL &&
	    LF_ISSET(DB_LOCK_FREE_LOCKER))
		__lock_freelocker( lt, region, sh_locker, indx);

freelock:
	if (LF_ISSET(DB_LOCK_FREE)) {
		lockp->status = DB_LSTAT_FREE;
		SH_TAILQ_INSERT_HEAD(
		    &region->free_locks, lockp, links, __db_lock);
		region->stat.st_nlocks--;
	}

	return (ret);
}

/*
 * __lock_addfamilylocker
 *	Put a locker entry in for a child transaction.
 *
 * PUBLIC: int __lock_addfamilylocker __P((DB_ENV *, u_int32_t, u_int32_t));
 */
int
__lock_addfamilylocker(dbenv, pid, id)
	DB_ENV *dbenv;
	u_int32_t pid, id;
{
	DB_LOCKER *lockerp, *mlockerp;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	u_int32_t ndx;
	int ret;

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;
	LOCKREGION(dbenv, lt);

	/* get/create the  parent locker info */
	LOCKER_LOCK(lt, region, pid, ndx);
	if ((ret = __lock_getlocker(dbenv->lk_handle,
	    pid, ndx, 1, &mlockerp)) != 0)
		goto err;

	/*
	 * We assume that only one thread can manipulate
	 * a single transaction family.
	 * Therefore the master locker cannot go away while
	 * we manipulate it, nor can another child in the
	 * family be created at the same time.
	 */
	LOCKER_LOCK(lt, region, id, ndx);
	if ((ret = __lock_getlocker(dbenv->lk_handle,
	    id, ndx, 1, &lockerp)) != 0)
		goto err;

	/* Point to our parent. */
	lockerp->parent_locker = R_OFFSET(&lt->reginfo, mlockerp);

	/* See if this locker is the family master. */
	if (mlockerp->master_locker == INVALID_ROFF)
		lockerp->master_locker = R_OFFSET(&lt->reginfo, mlockerp);
	else {
		lockerp->master_locker = mlockerp->master_locker;
		mlockerp = R_ADDR(&lt->reginfo, mlockerp->master_locker);
	}

	/*
	 * Link the child at the head of the master's list.
	 * The guess is when looking for deadlock that
	 * the most recent child is the one thats blocked.
	 */
	SH_LIST_INSERT_HEAD(
	    &mlockerp->child_locker, lockerp, child_link, __db_locker);

err:
	UNLOCKREGION(dbenv, lt);

	return (ret);
}

/*
 * __lock_freefamilylocker
 *	Remove a locker from the hash table and its family.
 *
 * This must be called without the locker bucket locked.
 *
 * PUBLIC: int __lock_freefamilylocker  __P((DB_LOCKTAB *, u_int32_t));
 */
int
__lock_freefamilylocker(lt, locker)
	DB_LOCKTAB *lt;
	u_int32_t locker;
{
	DB_ENV *dbenv;
	DB_LOCKER *sh_locker;
	DB_LOCKREGION *region;
	u_int32_t indx;
	int ret;

	dbenv = lt->dbenv;
	region = lt->reginfo.primary;

	LOCKREGION(dbenv, lt);
	LOCKER_LOCK(lt, region, locker, indx);

	if ((ret = __lock_getlocker(lt,
	    locker, indx, 0, &sh_locker)) != 0 || sh_locker == NULL)
		goto freelock;

	if (SH_LIST_FIRST(&sh_locker->heldby, __db_lock) != NULL) {
		ret = EINVAL;
		__db_err(dbenv, "Freeing locker with locks");
		goto freelock;
	}

	/* If this is part of a family, we must fix up its links. */
	if (sh_locker->master_locker != INVALID_ROFF)
		SH_LIST_REMOVE(sh_locker, child_link, __db_locker);

	__lock_freelocker(lt, region, sh_locker, indx);

freelock:
	UNLOCKREGION(dbenv, lt);
	return (ret);
}

/*
 * __lock_freelocker
 *	common code for deleting a locker.
 *
 * This must be called with the locker bucket locked.
 */
static void
__lock_freelocker(lt, region, sh_locker, indx)
	DB_LOCKTAB *lt;
	DB_LOCKREGION *region;
	DB_LOCKER *sh_locker;
	u_int32_t indx;

{
	HASHREMOVE_EL(
	    lt->locker_tab, indx, __db_locker, links, sh_locker);
	SH_TAILQ_INSERT_HEAD(
	    &region->free_lockers, sh_locker, links, __db_locker);
	SH_TAILQ_REMOVE(&region->lockers, sh_locker, ulinks, __db_locker);
	region->stat.st_nlockers--;
}

/*
 * __lock_set_timeout
 *		-- set timeout values in shared memory.
 * This is called from the transaction system.
 * We either set the time that this tranaction expires or the
 * amount of time that a lock for this transaction is permitted
 * to wait.
 *
 * PUBLIC: int __lock_set_timeout __P(( DB_ENV *,
 * PUBLIC:      u_int32_t, db_timeout_t, u_int32_t));
 */
int
__lock_set_timeout(dbenv, locker, timeout, op)
	DB_ENV *dbenv;
	u_int32_t locker;
	db_timeout_t timeout;
	u_int32_t op;
{
	DB_LOCKER *sh_locker;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	u_int32_t locker_ndx;
	int ret;

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;
	LOCKREGION(dbenv, lt);

	LOCKER_LOCK(lt, region, locker, locker_ndx);
	ret = __lock_getlocker(lt, locker, locker_ndx, 1, &sh_locker);
	UNLOCKREGION(dbenv, lt);
	if (ret != 0)
		return (ret);

	if (op == DB_SET_TXN_TIMEOUT) {
		if (timeout == 0)
			LOCK_SET_TIME_INVALID(&sh_locker->tx_expire);
		else
			__lock_expires(dbenv, &sh_locker->tx_expire, timeout);
	} else if (op == DB_SET_LOCK_TIMEOUT) {
		sh_locker->lk_timeout = timeout;
		F_SET(sh_locker, DB_LOCKER_TIMEOUT);
	} else if (op == DB_SET_TXN_NOW) {
		LOCK_SET_TIME_INVALID(&sh_locker->tx_expire);
		__lock_expires(dbenv, &sh_locker->tx_expire, 0);
		sh_locker->lk_expire = sh_locker->tx_expire;
	} else
		return (EINVAL);

	return (0);
}

/*
 * __lock_inherit_timeout
 *		-- inherit timeout values from parent locker.
 * This is called from the transaction system.  This will
 * return EINVAL if the parent does not exist or did not
 * have a current txn timeout set.
 *
 * PUBLIC: int __lock_inherit_timeout __P(( DB_ENV *, u_int32_t, u_int32_t));
 */
int
__lock_inherit_timeout(dbenv, parent, locker)
	DB_ENV *dbenv;
	u_int32_t parent, locker;
{
	DB_LOCKER *parent_locker, *sh_locker;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	u_int32_t locker_ndx;
	int ret;

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;
	ret = 0;
	LOCKREGION(dbenv, lt);

	/* If the parent does not exist, we are done. */
	LOCKER_LOCK(lt, region, parent, locker_ndx);
	if ((ret = __lock_getlocker(lt,
	    parent, locker_ndx, 0, &parent_locker)) != 0)
		goto err;

	/*
	 * If the parent is not there yet, thats ok.  If it
	 * does not have any timouts set, then avoid creating
	 * the child locker at this point.
	 */
	if (parent_locker == NULL ||
	    (LOCK_TIME_ISVALID(&parent_locker->tx_expire) &&
	    !F_ISSET(parent_locker, DB_LOCKER_TIMEOUT))) {
		ret = EINVAL;
		goto done;
	}

	LOCKER_LOCK(lt, region, locker, locker_ndx);
	if ((ret = __lock_getlocker(lt,
	    locker, locker_ndx, 1, &sh_locker)) != 0)
		goto err;

	sh_locker->tx_expire = parent_locker->tx_expire;

	if (F_ISSET(parent_locker, DB_LOCKER_TIMEOUT)) {
		sh_locker->lk_timeout = parent_locker->lk_timeout;
		F_SET(sh_locker, DB_LOCKER_TIMEOUT);
		if (!LOCK_TIME_ISVALID(&parent_locker->tx_expire))
			ret = EINVAL;
	}

done:
err:
	UNLOCKREGION(dbenv, lt);
	return (ret);
}

/*
 * __lock_getlocker --
 *	Get a locker in the locker hash table.  The create parameter
 * indicates if the locker should be created if it doesn't exist in
 * the table.
 *
 * This must be called with the locker bucket locked.
 *
 * PUBLIC: int __lock_getlocker __P((DB_LOCKTAB *,
 * PUBLIC:     u_int32_t, u_int32_t, int, DB_LOCKER **));
 */
int
__lock_getlocker(lt, locker, indx, create, retp)
	DB_LOCKTAB *lt;
	u_int32_t locker, indx;
	int create;
	DB_LOCKER **retp;
{
	DB_ENV *dbenv;
	DB_LOCKER *sh_locker;
	DB_LOCKREGION *region;

	dbenv = lt->dbenv;
	region = lt->reginfo.primary;

	HASHLOOKUP(lt->locker_tab,
	    indx, __db_locker, links, locker, sh_locker, __lock_locker_cmp);

	/*
	 * If we found the locker, then we can just return it.  If
	 * we didn't find the locker, then we need to create it.
	 */
	if (sh_locker == NULL && create) {
		/* Create new locker and then insert it into hash table. */
		if ((sh_locker = SH_TAILQ_FIRST(
		    &region->free_lockers, __db_locker)) == NULL) {
			__db_err(dbenv, __db_lock_err, "locker entries");
			return (ENOMEM);
		}
		SH_TAILQ_REMOVE(
		    &region->free_lockers, sh_locker, links, __db_locker);
		if (++region->stat.st_nlockers > region->stat.st_maxnlockers)
			region->stat.st_maxnlockers = region->stat.st_nlockers;

		sh_locker->id = locker;
		sh_locker->dd_id = 0;
		sh_locker->master_locker = INVALID_ROFF;
		sh_locker->parent_locker = INVALID_ROFF;
		SH_LIST_INIT(&sh_locker->child_locker);
		sh_locker->flags = 0;
		SH_LIST_INIT(&sh_locker->heldby);
		sh_locker->nlocks = 0;
		sh_locker->nwrites = 0;
		sh_locker->lk_timeout = 0;
		LOCK_SET_TIME_INVALID(&sh_locker->tx_expire);
		if (locker < TXN_MINIMUM && region->tx_timeout != 0)
			__lock_expires(dbenv,
			    &sh_locker->tx_expire, region->tx_timeout);
		LOCK_SET_TIME_INVALID(&sh_locker->lk_expire);

		HASHINSERT(lt->locker_tab, indx, __db_locker, links, sh_locker);
		SH_TAILQ_INSERT_HEAD(&region->lockers,
		    sh_locker, ulinks, __db_locker);
	}

	*retp = sh_locker;
	return (0);
}

/*
 * __lock_getobj --
 *	Get an object in the object hash table.  The create parameter
 * indicates if the object should be created if it doesn't exist in
 * the table.
 *
 * This must be called with the object bucket locked.
 */
static int
__lock_getobj(lt, obj, ndx, create, retp)
	DB_LOCKTAB *lt;
	const DBT *obj;
	u_int32_t ndx;
	int create;
	DB_LOCKOBJ **retp;
{
	DB_ENV *dbenv;
	DB_LOCKOBJ *sh_obj;
	DB_LOCKREGION *region;
	int ret;
	void *p;

	dbenv = lt->dbenv;
	region = lt->reginfo.primary;

	/* Look up the object in the hash table. */
	HASHLOOKUP(lt->obj_tab,
	    ndx, __db_lockobj, links, obj, sh_obj, __lock_cmp);

	/*
	 * If we found the object, then we can just return it.  If
	 * we didn't find the object, then we need to create it.
	 */
	if (sh_obj == NULL && create) {
		/* Create new object and then insert it into hash table. */
		if ((sh_obj =
		    SH_TAILQ_FIRST(&region->free_objs, __db_lockobj)) == NULL) {
			__db_err(lt->dbenv, __db_lock_err, "object entries");
			ret = ENOMEM;
			goto err;
		}

		/*
		 * If we can fit this object in the structure, do so instead
		 * of shalloc-ing space for it.
		 */
		if (obj->size <= sizeof(sh_obj->objdata))
			p = sh_obj->objdata;
		else if ((ret = __db_shalloc(
		    lt->reginfo.addr, obj->size, 0, &p)) != 0) {
			__db_err(dbenv, "No space for lock object storage");
			goto err;
		}

		memcpy(p, obj->data, obj->size);

		SH_TAILQ_REMOVE(
		    &region->free_objs, sh_obj, links, __db_lockobj);
		if (++region->stat.st_nobjects > region->stat.st_maxnobjects)
			region->stat.st_maxnobjects = region->stat.st_nobjects;

		SH_TAILQ_INIT(&sh_obj->waiters);
		SH_TAILQ_INIT(&sh_obj->holders);
		sh_obj->lockobj.size = obj->size;
		sh_obj->lockobj.off = SH_PTR_TO_OFF(&sh_obj->lockobj, p);

		HASHINSERT(lt->obj_tab, ndx, __db_lockobj, links, sh_obj);
	}

	*retp = sh_obj;
	return (0);

err:	return (ret);
}

/*
 * __lock_is_parent --
 *	Given a locker and a transaction, return 1 if the locker is
 * an ancestor of the designcated transaction.  This is used to determine
 * if we should grant locks that appear to conflict, but don't because
 * the lock is already held by an ancestor.
 */
static int
__lock_is_parent(lt, locker, sh_locker)
	DB_LOCKTAB *lt;
	u_int32_t locker;
	DB_LOCKER *sh_locker;
{
	DB_LOCKER *parent;

	parent = sh_locker;
	while (parent->parent_locker != INVALID_ROFF) {
		parent = (DB_LOCKER *)
		    R_ADDR(&lt->reginfo, parent->parent_locker);
		if (parent->id == locker)
			return (1);
	}

	return (0);
}

/*
 * __lock_promote --
 *
 * Look through the waiters and holders lists and decide which (if any)
 * locks can be promoted.   Promote any that are eligible.
 *
 * PUBLIC: int __lock_promote __P((DB_LOCKTAB *, DB_LOCKOBJ *, u_int32_t));
 */
int
__lock_promote(lt, obj, flags)
	DB_LOCKTAB *lt;
	DB_LOCKOBJ *obj;
	u_int32_t flags;
{
	struct __db_lock *lp_w, *lp_h, *next_waiter;
	DB_LOCKER *sh_locker;
	DB_LOCKREGION *region;
	u_int32_t locker_ndx;
	int had_waiters, state_changed;

	region = lt->reginfo.primary;
	had_waiters = 0;

	/*
	 * We need to do lock promotion.  We also need to determine if we're
	 * going to need to run the deadlock detector again.  If we release
	 * locks, and there are waiters, but no one gets promoted, then we
	 * haven't fundamentally changed the lockmgr state, so we may still
	 * have a deadlock and we have to run again.  However, if there were
	 * no waiters, or we actually promoted someone, then we are OK and we
	 * don't have to run it immediately.
	 *
	 * During promotion, we look for state changes so we can return this
	 * information to the caller.
	 */

	for (lp_w = SH_TAILQ_FIRST(&obj->waiters, __db_lock),
	    state_changed = lp_w == NULL;
	    lp_w != NULL;
	    lp_w = next_waiter) {
		had_waiters = 1;
		next_waiter = SH_TAILQ_NEXT(lp_w, links, __db_lock);

		/* Waiter may have aborted or expired. */
		if (lp_w->status != DB_LSTAT_WAITING)
			continue;
		/* Are we switching locks? */
		if (LF_ISSET(DB_LOCK_NOWAITERS) && lp_w->mode == DB_LOCK_WAIT)
			continue;

		if (LF_ISSET(DB_LOCK_REMOVE)) {
			__lock_remove_waiter(lt, obj, lp_w, DB_LSTAT_NOTEXIST);
			continue;
		}
		for (lp_h = SH_TAILQ_FIRST(&obj->holders, __db_lock);
		    lp_h != NULL;
		    lp_h = SH_TAILQ_NEXT(lp_h, links, __db_lock)) {
			if (lp_h->holder != lp_w->holder &&
			    CONFLICTS(lt, region, lp_h->mode, lp_w->mode)) {
				LOCKER_LOCK(lt,
				    region, lp_w->holder, locker_ndx);
				if ((__lock_getlocker(lt, lp_w->holder,
				    locker_ndx, 0, &sh_locker)) != 0) {
					DB_ASSERT(0);
					break;
				}
				if (!__lock_is_parent(lt,
				    lp_h->holder, sh_locker))
					break;
			}
		}
		if (lp_h != NULL)	/* Found a conflict. */
			break;

		/* No conflict, promote the waiting lock. */
		SH_TAILQ_REMOVE(&obj->waiters, lp_w, links, __db_lock);
		lp_w->status = DB_LSTAT_PENDING;
		SH_TAILQ_INSERT_TAIL(&obj->holders, lp_w, links);

		/* Wake up waiter. */
		MUTEX_UNLOCK(lt->dbenv, &lp_w->mutex);
		state_changed = 1;
	}

	/*
	 * If this object had waiters and doesn't any more, then we need
	 * to remove it from the dd_obj list.
	 */
	if (had_waiters && SH_TAILQ_FIRST(&obj->waiters, __db_lock) == NULL)
		SH_TAILQ_REMOVE(&region->dd_objs, obj, dd_links, __db_lockobj);
	return (state_changed);
}

/*
 * __lock_remove_waiter --
 *	Any lock on the waitlist has a process waiting for it.  Therefore,
 * we can't return the lock to the freelist immediately.  Instead, we can
 * remove the lock from the list of waiters, set the status field of the
 * lock, and then let the process waking up return the lock to the
 * free list.
 *
 * This must be called with the Object bucket locked.
 */
static void
__lock_remove_waiter(lt, sh_obj, lockp, status)
	DB_LOCKTAB *lt;
	DB_LOCKOBJ *sh_obj;
	struct __db_lock *lockp;
	db_status_t status;
{
	DB_LOCKREGION *region;
	int do_wakeup;

	region = lt->reginfo.primary;

	do_wakeup = lockp->status == DB_LSTAT_WAITING;

	SH_TAILQ_REMOVE(&sh_obj->waiters, lockp, links, __db_lock);
	lockp->links.stqe_prev = -1;
	lockp->status = status;
	if (SH_TAILQ_FIRST(&sh_obj->waiters, __db_lock) == NULL)
		SH_TAILQ_REMOVE(
		    &region->dd_objs,
		    sh_obj, dd_links, __db_lockobj);

	/*
	 * Wake whoever is waiting on this lock.
	 *
	 * The MUTEX_UNLOCK macro normally resolves to a single argument,
	 * keep the compiler quiet.
	 */
	if (do_wakeup)
		MUTEX_UNLOCK(lt->dbenv, &lockp->mutex);
}

/*
 * __lock_expires -- set the expire time given the time to live.
 * We assume that if timevalp is set then it contains "now".
 * This avoids repeated system calls to get the time.
 */
static void
__lock_expires(dbenv, timevalp, timeout)
	DB_ENV *dbenv;
	db_timeval_t *timevalp;
	db_timeout_t timeout;
{
	if (!LOCK_TIME_ISVALID(timevalp))
		__os_clock(dbenv, &timevalp->tv_sec, &timevalp->tv_usec);
	if (timeout > 1000000) {
		timevalp->tv_sec += timeout / 1000000;
		timevalp->tv_usec += timeout % 1000000;
	} else
		timevalp->tv_usec += timeout;

	if (timevalp->tv_usec > 1000000) {
		timevalp->tv_sec++;
		timevalp->tv_usec -= 1000000;
	}
}

/*
 * __lock_expired -- determine if a lock has expired.
 *
 * PUBLIC: int __lock_expired __P((DB_ENV *, db_timeval_t *, db_timeval_t *));
 */
int
__lock_expired(dbenv, now, timevalp)
	DB_ENV *dbenv;
	db_timeval_t *now, *timevalp;
{
	if (!LOCK_TIME_ISVALID(timevalp))
		return (0);

	if (!LOCK_TIME_ISVALID(now))
		__os_clock(dbenv, &now->tv_sec, &now->tv_usec);

	return (now->tv_sec > timevalp->tv_sec ||
	    (now->tv_sec == timevalp->tv_sec &&
	    now->tv_usec >= timevalp->tv_usec));
}

/*
 * __lock_trade --
 *
 * Trade locker ids on a lock.  This is used to reassign file locks from
 * a transactional locker id to a long-lived locker id.  This should be
 * called with the region mutex held.
 */
static int
__lock_trade(dbenv, lock, new_locker)
	DB_ENV *dbenv;
	DB_LOCK *lock;
	u_int32_t new_locker;
{
	struct __db_lock *lp;
	DB_LOCKREGION *region;
	DB_LOCKTAB *lt;
	DB_LOCKER *sh_locker;
	int ret;
	u_int32_t locker_ndx;

	lt = dbenv->lk_handle;
	region = lt->reginfo.primary;

	lp = (struct __db_lock *)R_ADDR(&lt->reginfo, lock->off);

	/* If the lock is already released, simply return. */
	if (lp->gen != lock->gen)
		return (DB_NOTFOUND);

	/* Make sure that we can get new locker and add this lock to it. */
	LOCKER_LOCK(lt, region, new_locker, locker_ndx);
	if ((ret =
	    __lock_getlocker(lt, new_locker, locker_ndx, 0, &sh_locker)) != 0)
		return (ret);

	if (sh_locker == NULL) {
		__db_err(dbenv, "Locker does not exist");
		return (EINVAL);
	}

	/* Remove the lock from its current locker. */
	if ((ret = __lock_checklocker(lt, lp, lp->holder, DB_LOCK_UNLINK)) != 0)
		return (ret);

	/* Add lock to its new locker. */
	SH_LIST_INSERT_HEAD(&sh_locker->heldby, lp, locker_links, __db_lock);
	sh_locker->nlocks++;
	if (IS_WRITELOCK(lp->mode))
		sh_locker->nwrites++;
	lp->holder = new_locker;

	return (0);
}
