cellar S. Lhomme
Internet-Draft
Intended status: Standards Track M. Bunkus
Expires: 5 November 2024
D. Rice
4 May 2024
Matroska Media Container Codec Specifications
draft-ietf-cellar-codec-13
Abstract
This document defines the Matroska codec mappings, including the
codec ID, layout of data in a Block Element and in an optional
CodecPrivate Element.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 5 November 2024.
Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Lhomme, et al. Expires 5 November 2024 [Page 1]
Internet-Draft Matroska Codec May 2024
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Status of This Document . . . . . . . . . . . . . . . . . . . 5
3. Notation and Conventions . . . . . . . . . . . . . . . . . . 5
4. Codec Mappings . . . . . . . . . . . . . . . . . . . . . . . 5
4.1. Defining Matroska Codec Support . . . . . . . . . . . . . 6
4.1.1. Codec ID . . . . . . . . . . . . . . . . . . . . . . 6
4.1.2. Codec Name . . . . . . . . . . . . . . . . . . . . . 7
4.1.3. Description . . . . . . . . . . . . . . . . . . . . . 7
4.1.4. Initialization . . . . . . . . . . . . . . . . . . . 7
4.1.5. Codec BlockAdditions . . . . . . . . . . . . . . . . 8
4.1.6. Citation . . . . . . . . . . . . . . . . . . . . . . 9
4.1.7. Deprecation Date . . . . . . . . . . . . . . . . . . 9
4.1.8. Superseded By . . . . . . . . . . . . . . . . . . . . 9
4.2. Recommendations for the Creation of New Codec Mappings . 9
4.3. Video Codec Mappings . . . . . . . . . . . . . . . . . . 9
4.3.1. V_MS/VFW/FOURCC . . . . . . . . . . . . . . . . . . . 9
4.3.2. V_UNCOMPRESSED . . . . . . . . . . . . . . . . . . . 10
4.3.3. V_MPEG4/ISO/SP . . . . . . . . . . . . . . . . . . . 10
4.3.4. V_MPEG4/ISO/ASP . . . . . . . . . . . . . . . . . . . 10
4.3.5. V_MPEG4/ISO/AP . . . . . . . . . . . . . . . . . . . 11
4.3.6. V_MPEG4/MS/V3 . . . . . . . . . . . . . . . . . . . . 11
4.3.7. V_MPEG1 . . . . . . . . . . . . . . . . . . . . . . . 11
4.3.8. V_MPEG2 . . . . . . . . . . . . . . . . . . . . . . . 12
4.3.9. V_MPEG4/ISO/AVC . . . . . . . . . . . . . . . . . . . 12
4.3.10. V_MPEGH/ISO/HEVC . . . . . . . . . . . . . . . . . . 12
4.3.11. V_MPEGI/ISO/VVC . . . . . . . . . . . . . . . . . . . 13
4.3.12. V_AVS2 . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.13. V_AVS3 . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.14. V_REAL/RV10 . . . . . . . . . . . . . . . . . . . . . 13
4.3.15. V_REAL/RV20 . . . . . . . . . . . . . . . . . . . . . 14
4.3.16. V_REAL/RV30 . . . . . . . . . . . . . . . . . . . . . 14
4.3.17. V_REAL/RV40 . . . . . . . . . . . . . . . . . . . . . 14
4.3.18. V_QUICKTIME . . . . . . . . . . . . . . . . . . . . . 15
4.3.19. V_THEORA . . . . . . . . . . . . . . . . . . . . . . 15
4.3.20. V_PRORES . . . . . . . . . . . . . . . . . . . . . . 15
4.3.21. V_VP8 . . . . . . . . . . . . . . . . . . . . . . . . 16
4.3.22. V_VP9 . . . . . . . . . . . . . . . . . . . . . . . . 16
4.3.23. V_FFV1 . . . . . . . . . . . . . . . . . . . . . . . 16
4.4. Audio Codec Mappings . . . . . . . . . . . . . . . . . . 17
4.4.1. A_MPEG/L3 . . . . . . . . . . . . . . . . . . . . . . 17
4.4.2. A_MPEG/L2 . . . . . . . . . . . . . . . . . . . . . . 17
4.4.3. A_MPEG/L1 . . . . . . . . . . . . . . . . . . . . . . 17
4.4.4. A_PCM/INT/BIG . . . . . . . . . . . . . . . . . . . . 18
4.4.5. A_PCM/INT/LIT . . . . . . . . . . . . . . . . . . . . 18
4.4.6. A_PCM/FLOAT/IEEE . . . . . . . . . . . . . . . . . . 18
4.4.7. A_MPC . . . . . . . . . . . . . . . . . . . . . . . . 19
Lhomme, et al. Expires 5 November 2024 [Page 2]
Internet-Draft Matroska Codec May 2024
4.4.8. A_AC3 . . . . . . . . . . . . . . . . . . . . . . . . 19
4.4.9. A_AC3/BSID9 . . . . . . . . . . . . . . . . . . . . . 19
4.4.10. A_AC3/BSID10 . . . . . . . . . . . . . . . . . . . . 19
4.4.11. A_ALAC . . . . . . . . . . . . . . . . . . . . . . . 20
4.4.12. A_DTS . . . . . . . . . . . . . . . . . . . . . . . . 20
4.4.13. A_DTS/EXPRESS . . . . . . . . . . . . . . . . . . . . 20
4.4.14. A_DTS/LOSSLESS . . . . . . . . . . . . . . . . . . . 21
4.4.15. A_VORBIS . . . . . . . . . . . . . . . . . . . . . . 21
4.4.16. A_FLAC . . . . . . . . . . . . . . . . . . . . . . . 21
4.4.17. A_REAL/14_4 . . . . . . . . . . . . . . . . . . . . . 21
4.4.18. A_REAL/28_8 . . . . . . . . . . . . . . . . . . . . . 22
4.4.19. A_REAL/COOK . . . . . . . . . . . . . . . . . . . . . 22
4.4.20. A_REAL/SIPR . . . . . . . . . . . . . . . . . . . . . 22
4.4.21. A_REAL/RALF . . . . . . . . . . . . . . . . . . . . . 23
4.4.22. A_REAL/ATRC . . . . . . . . . . . . . . . . . . . . . 23
4.4.23. A_MS/ACM . . . . . . . . . . . . . . . . . . . . . . 23
4.4.24. A_AAC/MPEG2/MAIN . . . . . . . . . . . . . . . . . . 23
4.4.25. A_AAC/MPEG2/LC . . . . . . . . . . . . . . . . . . . 24
4.4.26. A_AAC/MPEG2/LC/SBR . . . . . . . . . . . . . . . . . 24
4.4.27. A_AAC/MPEG2/SSR . . . . . . . . . . . . . . . . . . . 24
4.4.28. A_AAC/MPEG4/MAIN . . . . . . . . . . . . . . . . . . 25
4.4.29. A_AAC/MPEG4/LC . . . . . . . . . . . . . . . . . . . 25
4.4.30. A_AAC/MPEG4/LC/SBR . . . . . . . . . . . . . . . . . 25
4.4.31. A_AAC/MPEG4/SSR . . . . . . . . . . . . . . . . . . . 25
4.4.32. A_AAC/MPEG4/LTP . . . . . . . . . . . . . . . . . . . 26
4.4.33. A_QUICKTIME . . . . . . . . . . . . . . . . . . . . . 26
4.4.34. A_QUICKTIME/QDMC . . . . . . . . . . . . . . . . . . 26
4.4.35. A_QUICKTIME/QDM2 . . . . . . . . . . . . . . . . . . 27
4.4.36. A_TTA1 . . . . . . . . . . . . . . . . . . . . . . . 27
4.4.37. A_WAVPACK4 . . . . . . . . . . . . . . . . . . . . . 27
4.4.38. A_ATRAC/AT1 . . . . . . . . . . . . . . . . . . . . . 28
4.5. Subtitle Codec Mappings . . . . . . . . . . . . . . . . . 28
4.5.1. S_TEXT/UTF8 . . . . . . . . . . . . . . . . . . . . . 28
4.5.2. S_TEXT/SSA . . . . . . . . . . . . . . . . . . . . . 28
4.5.3. S_TEXT/ASS . . . . . . . . . . . . . . . . . . . . . 29
4.5.4. S_TEXT/WEBVTT . . . . . . . . . . . . . . . . . . . . 29
4.5.5. S_IMAGE/BMP . . . . . . . . . . . . . . . . . . . . . 29
4.5.6. S_DVBSUB . . . . . . . . . . . . . . . . . . . . . . 29
4.5.7. S_VOBSUB . . . . . . . . . . . . . . . . . . . . . . 29
4.5.8. S_HDMV/PGS . . . . . . . . . . . . . . . . . . . . . 30
4.5.9. S_HDMV/TEXTST . . . . . . . . . . . . . . . . . . . . 30
4.5.10. S_KATE . . . . . . . . . . . . . . . . . . . . . . . 30
4.5.11. S_ARIBSUB . . . . . . . . . . . . . . . . . . . . . . 31
4.6. Button Codec Mappings . . . . . . . . . . . . . . . . . . 31
4.6.1. B_VOBBTN . . . . . . . . . . . . . . . . . . . . . . 31
4.7. Block Addition Mappings . . . . . . . . . . . . . . . . . 31
4.7.1. Use BlockAddIDValue . . . . . . . . . . . . . . . . . 31
4.7.2. Opaque data . . . . . . . . . . . . . . . . . . . . . 31
Lhomme, et al. Expires 5 November 2024 [Page 3]
Internet-Draft Matroska Codec May 2024
4.7.3. ITU T.35 metadata . . . . . . . . . . . . . . . . . . 32
4.7.4. avcE . . . . . . . . . . . . . . . . . . . . . . . . 32
4.7.5. dvcC . . . . . . . . . . . . . . . . . . . . . . . . 32
4.7.6. dvvC . . . . . . . . . . . . . . . . . . . . . . . . 32
4.7.7. hvcE . . . . . . . . . . . . . . . . . . . . . . . . 33
4.7.8. mvcC . . . . . . . . . . . . . . . . . . . . . . . . 33
5. Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.1. Images Subtitles . . . . . . . . . . . . . . . . . . . . 34
5.2. SRT Subtitles . . . . . . . . . . . . . . . . . . . . . . 37
5.3. SSA/ASS Subtitles . . . . . . . . . . . . . . . . . . . . 37
5.4. WebVTT . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.4.1. Storage of WebVTT in Matroska . . . . . . . . . . . . 42
5.4.1.1. CodecID: codec identification . . . . . . . . . . 42
5.4.1.2. CodecPrivate: storage of global WebVTT blocks . . 42
5.4.1.3. Storage of non-global WebVTT blocks . . . . . . . 42
5.4.1.4. Storage of Cues in Matroska blocks . . . . . . . 42
5.4.1.5. BlockAdditions: storing non-global WebVTT blocks,
Cue Settings Lists and Cue identifiers . . . . . . 43
5.4.2. Examples of transformation . . . . . . . . . . . . . 43
5.4.2.1. Example WebVTT file . . . . . . . . . . . . . . . 43
5.4.2.2. Example of CodecPrivate . . . . . . . . . . . . . 44
5.4.2.3. Storage of Cue 1 . . . . . . . . . . . . . . . . 45
5.4.2.4. Storage of Cue 2 . . . . . . . . . . . . . . . . 45
5.4.2.5. Storage of Cue 3 . . . . . . . . . . . . . . . . 46
5.4.2.6. Storage of Cue 4 . . . . . . . . . . . . . . . . 46
5.4.3. Storage of WebVTT in Matroska vs. WebM . . . . . . . 46
5.5. HDMV presentation graphics subtitles . . . . . . . . . . 47
5.5.1. Storage of HDMV presentation graphics subtitles . . . 47
5.5.1.1. Storage of HDMV PGS Segments in Matroska
Blocks . . . . . . . . . . . . . . . . . . . . . . 47
5.6. HDMV text subtitles . . . . . . . . . . . . . . . . . . . 47
5.6.1. Storage of HDMV text subtitles . . . . . . . . . . . 47
5.6.1.1. Storage of HDMV TextST Dialog Presentation Segments
in Matroska Blocks . . . . . . . . . . . . . . . . 48
5.6.1.2. Character set . . . . . . . . . . . . . . . . . . 48
5.7. Digital Video Broadcasting (DVB) subtitles . . . . . . . 48
5.7.1. Storage of DVB subtitles . . . . . . . . . . . . . . 49
5.7.1.1. CodecID . . . . . . . . . . . . . . . . . . . . . 49
5.7.1.2. CodecPrivate . . . . . . . . . . . . . . . . . . 49
5.7.1.3. Storage of DVB subtitles in Matroska Blocks . . . 49
5.8. ARIB (ISDB) subtitles . . . . . . . . . . . . . . . . . . 49
5.8.1. Storage of ARIB subtitles . . . . . . . . . . . . . . 49
5.8.1.1. CodecID . . . . . . . . . . . . . . . . . . . . . 49
5.8.1.2. CodecPrivate . . . . . . . . . . . . . . . . . . 49
5.8.1.3. Storage of ARIB subtitles in Matroska Blocks . . 50
6. Block Additional Mapping . . . . . . . . . . . . . . . . . . 50
6.1. Summary of Assigned BlockAddIDType Values . . . . . . . . 52
6.2. SMPTE ST 12-1 Timecode . . . . . . . . . . . . . . . . . 52
Lhomme, et al. Expires 5 November 2024 [Page 4]
Internet-Draft Matroska Codec May 2024
6.2.1. Timecode Description . . . . . . . . . . . . . . . . 52
6.2.2. BlockAddIDType . . . . . . . . . . . . . . . . . . . 53
6.2.3. BlockAddIDName . . . . . . . . . . . . . . . . . . . 53
6.2.4. BlockAddIDExtraData . . . . . . . . . . . . . . . . . 54
7. Security Considerations . . . . . . . . . . . . . . . . . . . 54
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 54
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 54
9.1. Normative References . . . . . . . . . . . . . . . . . . 54
9.2. Informative References . . . . . . . . . . . . . . . . . 56
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 56
1. Introduction
Matroska is a multimedia container format. It stores interleaved and
timestamped audio/video/subtitle data using various codecs. To
interpret the codec data, a mapping between the way the data is
stored in Matroska and how it is understood by such a codec is
necessary.
This document intends to define this mapping for many commonly used
codecs in Matroska.
2. Status of This Document
This document is a work-in-progress specification defining the
Matroska file format as part of the IETF Cellar working group
(https://datatracker.ietf.org/wg/cellar/charter/). It uses basic
elements and concept already defined in the Matroska specifications
defined by this workgroup [Matroska].
3. Notation and Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
4. Codec Mappings
A Codec Mapping is a set of attributes to identify, name, and
contextualize the format and characteristics of encoded data that can
be contained within Matroska Clusters.
Each TrackEntry used within Matroska MUST reference a defined Codec
Mapping using the Codec ID to identify and describe the format of the
encoded data in its associated Clusters. This Codec ID is a unique
registered identifier that represents the encoding stored within the
Lhomme, et al. Expires 5 November 2024 [Page 5]
Internet-Draft Matroska Codec May 2024
Track. Certain encodings MAY also require some form of codec
initialization to provide its decoder with context and technical
metadata.
The intention behind this list is not to list all existing audio and
video codecs, but rather to list those codecs that are currently
supported in Matroska and therefore need a well defined Codec ID so
that all developers supporting Matroska will use the same Codec ID.
If you feel we missed support for a very important codec, please tell
us on our development mailing list (cellar at ietf.org).
4.1. Defining Matroska Codec Support
Support for a codec is defined in Matroska with the following values.
4.1.1. Codec ID
Each codec supported for storage in Matroska MUST have a unique Codec
ID. Each Codec ID MUST be prefixed with the string from the
following table according to the associated type of the codec. All
characters of a Codec ID Prefix MUST be capital letters (A-Z) except
for the last character of a Codec ID Prefix which MUST be an
underscore ("_").
+============+=================+
| Codec Type | Codec ID Prefix |
+============+=================+
| Video | "V_" |
+------------+-----------------+
| Audio | "A_" |
+------------+-----------------+
| Subtitle | "S_" |
+------------+-----------------+
| Button | "B_" |
+------------+-----------------+
Table 1
Each Codec ID MUST include a Major Codec ID immediately following the
Codec ID Prefix. A Major Codec ID MAY be followed by an OPTIONAL
Codec ID Suffix to communicate a refinement of the Major Codec ID.
If a Codec ID Suffix is used, then the Codec ID MUST include a
forward slash ("/") as a separator between the Major Codec ID and the
Codec ID Suffix. The Major Codec ID MUST be composed of only capital
letters (A-Z) and numbers (0-9). The Codec ID Suffix MUST be
composed of only capital letters (A-Z), numbers (0-9), underscore
("_"), and forward slash ("/").
Lhomme, et al. Expires 5 November 2024 [Page 6]
Internet-Draft Matroska Codec May 2024
The following table provides examples of valid Codec IDs and their
components:
+==========+==========+===========+===========+=================+
| Codec ID | Major | Separator | Codec ID | Codec ID |
| Prefix | Codec ID | | Suffix | |
+==========+==========+===========+===========+=================+
| A_ | AAC | / | MPEG2/LC/ | A_AAC/MPEG2/LC/ |
| | | | SBR | SBR |
+----------+----------+-----------+-----------+-----------------+
| V_ | MPEG4 | / | ISO/ASP | V_MPEG4/ISO/ASP |
+----------+----------+-----------+-----------+-----------------+
| V_ | MPEG1 | | | V_MPEG1 |
+----------+----------+-----------+-----------+-----------------+
Table 2
4.1.2. Codec Name
Each encoding supported for storage in Matroska MUST have a Codec
Name. The Codec Name provides a readable label for the encoding.
4.1.3. Description
An optional description for the encoding. This value is only
intended for human consumption.
4.1.4. Initialization
Each encoding supported for storage in Matroska MUST have a defined
Initialization. The Initialization MUST describe the storage of data
necessary to initialize the decoder, which MUST be stored within the
CodecPrivate Element. When the Initialization is updated within a
track, then that updated Initialization data MUST be written into the
CodecState Element of the first Cluster to require it. If the
encoding does not require any form of Initialization, then none MUST
be used to define the Initialization and the CodecPrivate Element
SHOULD NOT be written and MUST be ignored. Data that is defined
Initialization to be stored in the CodecPrivate Element is known as
Private Data.
Lhomme, et al. Expires 5 November 2024 [Page 7]
Internet-Draft Matroska Codec May 2024
4.1.5. Codec BlockAdditions
Additional data that contextualizes or supplements a Block can be
stored within the BlockAdditional Element of a BlockMore Element.
This BlockAdditional data MAY be passed to the associated decoder
along with the content of the Block Element. Each BlockAdditional is
coupled with a BlockAddID that identifies the kind of data it
contains. The following table defines the meanings of BlockAddID
values.
+============+=====================================================+
| BlockAddID | Definition |
| Value | |
+============+=====================================================+
| 0 | Invalid. |
+------------+-----------------------------------------------------+
| 1 | Indicates that the context of the BlockAdditional |
| | data is defined by the corresponding Codec Mapping. |
+------------+-----------------------------------------------------+
| 2 or | BlockAddID values of 2 and greater are mapped to |
| greater | the BlockAddIDValue of the BlockAdditionMapping of |
| | the associated Track. |
+------------+-----------------------------------------------------+
Table 3
The values of BlockAddID that are 2 of greater have no semantic
meaning, but simply associate the BlockMore Element with a
BlockAdditionMapping of the associated Track. See Section 6 on Block
Additional Mappings for more information.
The following XML depicts the nested Elements of a BlockGroup Element
with an example of BlockAdditions:
{Binary data of a VP9 video frame in YUV}
1
{alpha channel encoding to supplement the VP9 frame}
Lhomme, et al. Expires 5 November 2024 [Page 8]
Internet-Draft Matroska Codec May 2024
4.1.6. Citation
Documentation of the associated normative and informative references
for the codec is RECOMMENDED.
4.1.7. Deprecation Date
A timestamp, expressed in [RFC3339] that notes when support for the
Codec Mapping within Matroska was deprecated. If a Codec Mapping is
defined with a Deprecation Date, then it is RECOMMENDED that Matroska
Writers SHOULD NOT use the Codec Mapping after the Deprecation Date.
4.1.8. Superseded By
A Codec Mapping MAY only be defined with a Superseded By value, if it
has an expressed Deprecation Date. If used, the Superseded By value
MUST store the Codec ID of another Codec Mapping that has superseded
the Codec Mapping.
4.2. Recommendations for the Creation of New Codec Mappings
Creators of new Codec Mappings to be used in the context of Matroska:
* SHOULD assume that all Codec Mappings they create might become
standardized, public, commonly deployed, or usable across multiple
implementations.
* SHOULD employ meaningful values for Codec ID and Codec Name that
they have reason to believe are currently unused.
* SHOULD NOT prefix their Codec ID with "X_" or similar constructs.
These recommendations are based on Section 3 of [RFC6648].
4.3. Video Codec Mappings
4.3.1. V_MS/VFW/FOURCC
Codec ID: V_MS/VFW/FOURCC
Codec Name: Microsoft (TM) Video Codec Manager (VCM)
Lhomme, et al. Expires 5 November 2024 [Page 9]
Internet-Draft Matroska Codec May 2024
Description: The private data contains the VCM structure
BITMAPINFOHEADER including the extra private bytes, as defined by
Microsoft (https://msdn.microsoft.com/en-us/library/windows/desktop/
dd318229(v=vs.85).aspx). The data are stored in little-endian format
(like on IA32 machines). Where is the Huffman table stored in
HuffYUV, not AVISTREAMINFO ??? And the FourCC, not in
AVISTREAMINFO.fccHandler ???
Initialization: Private Data contains the VCM structure
BITMAPINFOHEADER including the extra private bytes, as defined by
Microsoft in https://msdn.microsoft.com/en-
us/library/windows/desktop/dd183376(v=vs.85).aspx
(https://msdn.microsoft.com/en-us/library/windows/desktop/
dd183376(v=vs.85).aspx).
Citation: https://msdn.microsoft.com/en-us/library/windows/desktop/
dd183376(v=vs.85).aspx (https://msdn.microsoft.com/en-
us/library/windows/desktop/dd183376(v=vs.85).aspx)
4.3.2. V_UNCOMPRESSED
Codec ID: V_UNCOMPRESSED
Codec Name: Video, raw uncompressed video frames
Description: All details about the used color specs and bit depth are
to be put/read from the TrackEntry\Video\UncompressedFourCC elements.
Initialization: none
4.3.3. V_MPEG4/ISO/SP
Codec ID: V_MPEG4/ISO/SP
Codec Name: MPEG4 ISO simple profile (DivX4)
Description: Stream was created via improved codec API (UCI) or even
transmuxed from AVI (no b-frames in Simple Profile), frame order is
coding order.
Initialization: none
4.3.4. V_MPEG4/ISO/ASP
Codec ID: V_MPEG4/ISO/ASP
Codec Name: MPEG4 ISO advanced simple profile (DivX5, XviD, FFMPEG)
Lhomme, et al. Expires 5 November 2024 [Page 10]
Internet-Draft Matroska Codec May 2024
Description: Stream was created via improved codec API (UCI) or
transmuxed from MP4, not simply transmuxed from AVI. Note there are
differences how b-frames are handled in these original streams, when
being compared to a VfW created stream, as here there are no dummy
frames inserted, the frame order is exactly the same as the coding
order, same as in MP4 streams.
Initialization: none
4.3.5. V_MPEG4/ISO/AP
Codec ID: V_MPEG4/ISO/AP
Codec Name: MPEG4 ISO advanced profile
Description: Stream was created via improved codec API (UCI) or
transmuxed from MP4, not simply transmuxed from AVI. Note there are
differences how b-frames are handled in these original streams, when
being compared to a VfW created stream, as here there are no dummy
frames inserted, the frame order is exactly the same as the coding
order, same as in MP4 streams.
Initialization: none
4.3.6. V_MPEG4/MS/V3
Codec ID: V_MPEG4/MS/V3
Codec Name: Microsoft (TM) MPEG4 V3
Description: Microsoft (TM) MPEG4 V3 and derivates, means DivX3,
Angelpotion, SMR, etc.; stream was created using VfW codec or
transmuxed from AVI; note that V1/V2 are covered in VfW compatibility
mode.
Initialization: none
4.3.7. V_MPEG1
Codec ID: V_MPEG1
Codec Name: MPEG 1
Description: The Matroska video stream will contain a demuxed
Elementary Stream (ES), where block boundaries are still to be
defined. It's RECOMMENDED to use MPEG2MKV.exe for creating those
files, and to compare the results with self-made implementations
Lhomme, et al. Expires 5 November 2024 [Page 11]
Internet-Draft Matroska Codec May 2024
Initialization: none
4.3.8. V_MPEG2
Codec ID: V_MPEG2
Codec Name: MPEG 2
Description: The Matroska video stream will contain a demuxed
Elementary Stream (ES), where block boundaries are still to be
defined. It's RECOMMENDED to use MPEG2MKV.exe for creating those
files, and to compare the results with self-made implementations
Initialization: none
4.3.9. V_MPEG4/ISO/AVC
Codec ID: V_MPEG4/ISO/AVC
Codec Name: AVC/H.264
Description: Individual pictures (which could be a frame, a field, or
2 fields having the same timestamp) of AVC/H.264 stored as described
in [ISO.14496-15].
Initialization: The Private Data contains a
AVCDecoderConfigurationRecord structure, as defined in
[ISO.14496-15]. For legacy reasons, because Block Addition Mappings
are preferred; see Section 4.7, the AVCDecoderConfigurationRecord
structure MAY be followed by an extension block beginning with a
4-byte extension block size field in big-endian byte order which is
the size of the extension block minus 4 (excluding the size of the
extension block size field) and a 4-byte field corresponding to a
BlockAddIDType of "mvcC" followed by a content corresponding to the
content of BlockAddIDExtraData for mvcC; see Section 4.7.8.
4.3.10. V_MPEGH/ISO/HEVC
Codec ID: V_MPEGH/ISO/HEVC
Codec Name: HEVC/H.265
Description: Individual pictures (which could be a frame, a field, or
2 fields having the same timestamp) of HEVC/H.265 stored as described
in [ISO.14496-15].
Lhomme, et al. Expires 5 November 2024 [Page 12]
Internet-Draft Matroska Codec May 2024
Initialization: The Private Data contains a
HEVCDecoderConfigurationRecord structure, as defined in
[ISO.14496-15].
4.3.11. V_MPEGI/ISO/VVC
Codec ID: V_MPEGI/ISO/VVC
Codec Name: VVC/H.266
Description: Individual pictures (which could be a frame, a field, or
2 fields having the same timestamp) of VVC/H.266 stored as described
in [ISO.14496-15].
Initialization: The Private Data contains a
VVCDecoderConfigurationRecord structure, as defined in
[ISO.14496-15].
4.3.12. V_AVS2
Codec ID: V_AVS2
Codec Name: AVS2-P2/IEEE.1857.4
Description: Individual pictures of AVS2-P2 stored as described in
the second part of [IEEE.1857-4].
Initialization: none.
4.3.13. V_AVS3
Codec ID: V_AVS3
Codec Name: AVS3-P2/IEEE.1857.10
Description: Individual pictures of AVS3-P2 stored as described in
the second part of [IEEE.1857-10].
Initialization: none.
4.3.14. V_REAL/RV10
Codec ID: V_REAL/RV10
Codec Name: RealVideo 1.0 aka RealVideo 5
Description: Individual slices from the Real container are combined
into a single frame.
Lhomme, et al. Expires 5 November 2024 [Page 13]
Internet-Draft Matroska Codec May 2024
Initialization: The Private Data contains a real_video_props_t
structure in big-endian byte order as found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.3.15. V_REAL/RV20
Codec ID: V_REAL/RV20
Codec Name: RealVideo G2 and RealVideo G2+SVT
Description: Individual slices from the Real container are combined
into a single frame.
Initialization: The Private Data contains a real_video_props_t
structure in big-endian byte order as found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.3.16. V_REAL/RV30
Codec ID: V_REAL/RV30
Codec Name: RealVideo 8
Description: Individual slices from the Real container are combined
into a single frame.
Initialization: The Private Data contains a real_video_props_t
structure in big-endian byte order as found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.3.17. V_REAL/RV40
Codec ID: V_REAL/RV40
Codec Name: rv40 : RealVideo 9
Description: Individual slices from the Real container are combined
into a single frame.
Initialization: The Private Data contains a real_video_props_t
structure in big-endian byte order as found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
Lhomme, et al. Expires 5 November 2024 [Page 14]
Internet-Draft Matroska Codec May 2024
4.3.18. V_QUICKTIME
Codec ID: V_QUICKTIME
Codec Name: Video taken from QuickTime(TM) files
Description: Several codecs as stored in QuickTime (e.g., Sorenson or
Cinepak).
Initialization: The Private Data contains all additional data that is
stored in the 'stsd' (sample description) atom in the QuickTime file
*after* the mandatory video descriptor structure (starting with the
size and FourCC fields). For an explanation of the QuickTime file
format read QuickTime File Format Specification
(https://developer.apple.com/library/mac/documentation/QuickTime/
QTFF/QTFFPreface/qtffPreface.html).
4.3.19. V_THEORA
Codec ID: V_THEORA
Codec Name: Theora
Initialization: The Private Data contains the first three Theora
packets in order. The lengths of the packets precedes them. The
actual layout is:
* Byte 1: number of distinct packets #p minus one inside the
CodecPrivate block. This MUST be "2" for current (as of
2016-07-08) Theora headers.
* Bytes 2..n: lengths of the first #p packets, coded in Xiph-style
lacing. The length of the last packet is the length of the
CodecPrivate block minus the lengths coded in these bytes minus
one.
* Bytes n+1..: The Theora identification header, followed by the
commend header followed by the codec setup header. Those are
described in the Theora specs (http://www.theora.org/doc/
Theora.pdf).
4.3.20. V_PRORES
Codec ID: V_PRORES
Codec Name: Apple ProRes
Initialization: The Private Data contains the FourCC as found in MP4
movies:
Lhomme, et al. Expires 5 November 2024 [Page 15]
Internet-Draft Matroska Codec May 2024
* ap4x: ProRes 4444 XQ
* ap4h: ProRes 4444
* apch: ProRes 422 High Quality
* apcn: ProRes 422 Standard Definition
* apcs: ProRes 422 LT
* apco: ProRes 422 Proxy
* aprh: ProRes RAW High Quality
* aprn: ProRes RAW Standard Definition
this page for more technical details on ProRes
(http://wiki.multimedia.cx/index.php?title=Apple_ProRes#Frame_layout)
4.3.21. V_VP8
Codec ID: V_VP8
Codec Name: VP8 Codec format
Description: VP8 is an open and royalty free video compression format
developed by Google and created by On2 Technologies as a successor to
VP7. [RFC6386]
Codec BlockAdditions: A single-channel encoding of an alpha channel
MAY be stored in BlockAdditions. The BlockAddId of the BlockMore
containing these data MUST be 1.
Initialization: none
4.3.22. V_VP9
Codec ID: V_VP9
Codec Name: VP9 Codec format
Description: VP9 is an open and royalty free video compression format
developed by Google as a successor to VP8. Draft VP9 Bitstream and
Decoding Process Specification (https://www.webmproject.org/vp9/)
Codec BlockAdditions: A single-channel encoding of an alpha channel
MAY be stored in BlockAdditions. The BlockAddId of the BlockMore
containing these data MUST be 1.
Initialization: none
4.3.23. V_FFV1
Codec ID: V_FFV1
Lhomme, et al. Expires 5 November 2024 [Page 16]
Internet-Draft Matroska Codec May 2024
Codec Name: FF Video Codec 1
Description: FFV1 is a lossless intra-frame video encoding format
designed to efficiently compress video data in a variety of pixel
formats. Compared to uncompressed video, FFV1 offers storage
compression, frame fixity, and self-description, which makes FFV1
useful as a preservation or intermediate video format. Draft FFV1
Specification (https://datatracker.ietf.org/doc/draft-ietf-cellar-
ffv1/)
Initialization: For FFV1 versions 0 or 1, Private Data SHOULD NOT be
written. For FFV1 version 3 or greater, the Private Data MUST
contain the FFV1 Configuration Record structure, as defined in
https://tools.ietf.org/html/draft-ietf-cellar-ffv1-04#section-4.2
(https://tools.ietf.org/html/draft-ietf-cellar-ffv1-04#section-4.2),
and no other data.
4.4. Audio Codec Mappings
4.4.1. A_MPEG/L3
Codec ID: A_MPEG/L3
Codec Name: MPEG Audio 1, 2, 2.5 Layer III
Description: The data contain everything needed for playback in the
MPEG Audio header of each frame. Corresponding ACM wFormatTag :
0x0055
Initialization: none
4.4.2. A_MPEG/L2
Codec ID: A_MPEG/L2
Codec Name: MPEG Audio 1, 2 Layer II
Description: The data contain everything needed for playback in the
MPEG Audio header of each frame. Corresponding ACM wFormatTag :
0x0050
Initialization: none
4.4.3. A_MPEG/L1
Codec ID: A_MPEG/L1
Codec Name: MPEG Audio 1, 2 Layer I
Lhomme, et al. Expires 5 November 2024 [Page 17]
Internet-Draft Matroska Codec May 2024
Description: The data contain everything needed for playback in the
MPEG Audio header of each frame. Corresponding ACM wFormatTag :
0x0050
Initialization: none
4.4.4. A_PCM/INT/BIG
Codec ID: A_PCM/INT/BIG
Codec Name: PCM Integer Big Endian
Description: The audio bit depth MUST be read and set from the
BitDepth Element. Audio samples MUST be considered as signed values,
except if the audio bit depth is 8 which MUST be interpreted as
unsigned values. Corresponding ACM wFormatTag : ???
Initialization: none
4.4.5. A_PCM/INT/LIT
Codec ID: A_PCM/INT/LIT
Codec Name: PCM Integer Little Endian
Description: The audio bit depth MUST be read and set from the
BitDepth Element. Audio samples MUST be considered as signed values,
except if the audio bit depth is 8 which MUST be interpreted as
unsigned values. Corresponding ACM wFormatTag : 0x0001
Initialization: none
4.4.6. A_PCM/FLOAT/IEEE
Codec ID: A_PCM/FLOAT/IEEE
Codec Name: Floating-Point, IEEE compatible
Description: The audio bit depth MUST be read and set from the
BitDepth Element (32 bit in most cases). The floats are stored as
defined in [IEEE.754] and in little-endian order. Corresponding ACM
wFormatTag : 0x0003
Initialization: none
Lhomme, et al. Expires 5 November 2024 [Page 18]
Internet-Draft Matroska Codec May 2024
4.4.7. A_MPC
Codec ID: A_MPC
Codec Name: MPC (musepack) SV8
Description: The main developer for musepack has requested that we
wait until the SV8 framing has been fully defined for musepack before
defining how to store it in Matroska.
4.4.8. A_AC3
Codec ID: A_AC3
Codec Name: (Dolby™) AC3
Description: BSID <= 8 !! The private data is void ??? Corresponding
ACM wFormatTag : 0x2000 ; channel number have to be read from the
corresponding audio element
4.4.9. A_AC3/BSID9
Codec ID: A_AC3/BSID9
Codec Name: (Dolby™) AC3
Description: The ac3 frame header has, similar to the mpeg-audio
header a version field. Normal ac3 is defined as bitstream id 8 (5
Bits, numbers are 0-15). Everything below 8 is still compatible with
all decoders that handle 8 correctly. Everything higher are
additions that break decoder compatibility. For the samplerates
24kHz (00); 22,05kHz (01) and 16kHz (10) the BSID is 9 For the
samplerates 12kHz (00); 11,025kHz (01) and 8kHz (10) the BSID is 10
Initialization: none
4.4.10. A_AC3/BSID10
Codec ID: A_AC3/BSID10
Codec Name: (Dolby™) AC3
Lhomme, et al. Expires 5 November 2024 [Page 19]
Internet-Draft Matroska Codec May 2024
Description: The ac3 frame header has, similar to the mpeg-audio
header a version field. Normal ac3 is defined as bitstream id 8 (5
Bits, numbers are 0-15). Everything below 8 is still compatible with
all decoders that handle 8 correctly. Everything higher are
additions that break decoder compatibility. For the samplerates
24kHz (00); 22,05kHz (01) and 16kHz (10) the BSID is 9 For the
samplerates 12kHz (00); 11,025kHz (01) and 8kHz (10) the BSID is 10
Initialization: none
4.4.11. A_ALAC
Codec ID: A_ALAC
Codec Name: ALAC (Apple Lossless Audio Codec)
Initialization: The Private Data contains ALAC's magic cookie (both
the codec specific configuration as well as the optional channel
layout information). Its format is described in ALAC's official
source code (http://alac.macosforge.org/trac/browser/trunk/
ALACMagicCookieDescription.txt).
4.4.12. A_DTS
Codec ID: A_DTS
Codec Name: Digital Theatre System
Description: Supports DTS, DTS-ES, DTS-96/26, DTS-HD High Resolution
Audio and DTS-HD Master Audio. The private data is void.
Corresponding ACM wFormatTag : 0x2001
Initialization: none
4.4.13. A_DTS/EXPRESS
Codec ID: A_DTS/EXPRESS
Codec Name: Digital Theatre System Express
Description: DTS Express (a.k.a. LBR) audio streams. The private
data is void. Corresponding ACM wFormatTag : 0x2001
Initialization: none
Lhomme, et al. Expires 5 November 2024 [Page 20]
Internet-Draft Matroska Codec May 2024
4.4.14. A_DTS/LOSSLESS
Codec ID: A_DTS/LOSSLESS
Codec Name: Digital Theatre System Lossless
Description: DTS Lossless audio that does not have a core substream.
The private data is void. Corresponding ACM wFormatTag : 0x2001
Initialization: none
4.4.15. A_VORBIS
Codec ID: A_VORBIS
Codec Name: Vorbis
Initialization: The Private Data contains the first three Vorbis
packet in order. The lengths of the packets precedes them. The
actual layout is: - Byte 1: number of distinct packets #p minus one
inside the CodecPrivate block. This MUST be "2" for current (as of
2016-07-08) Vorbis headers. - Bytes 2..n: lengths of the first #p
packets, coded in Xiph-style lacing. The length of the last packet
is the length of the CodecPrivate block minus the lengths coded in
these bytes minus one. - Bytes n+1..: The Vorbis identification
header (https://xiph.org/vorbis/doc/Vorbis_I_spec.html), followed by
the Vorbis comment header (https://xiph.org/vorbis/doc/
v-comment.html) followed by the codec setup header
(https://xiph.org/vorbis/doc/Vorbis_I_spec.html).
4.4.16. A_FLAC
Codec ID: A_FLAC
Codec Name: FLAC (Free Lossless Audio Codec)
(http://flac.sourceforge.net/)
Initialization: The Private Data contains all the header/metadata
packets before the first data packet. These include the first header
packet containing only the word fLaC as well as all metadata packets.
4.4.17. A_REAL/14_4
Codec ID: A_REAL/14_4
Codec Name: Real Audio 1
Lhomme, et al. Expires 5 November 2024 [Page 21]
Internet-Draft Matroska Codec May 2024
Initialization: The Private Data contains either the
"real_audio_v4_props_t" or the "real_audio_v5_props_t" structure
(differentiated by their "version" field; big-endian byte order) as
found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.4.18. A_REAL/28_8
Codec ID: A_REAL/28_8
Codec Name: Real Audio 2
Initialization: The Private Data contains either the
"real_audio_v4_props_t" or the "real_audio_v5_props_t" structure
(differentiated by their "version" field; big-endian byte order) as
found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.4.19. A_REAL/COOK
Codec ID: A_REAL/COOK
Codec Name: Real Audio Cook Codec (codename: Gecko)
Initialization: The Private Data contains either the
"real_audio_v4_props_t" or the "real_audio_v5_props_t" structure
(differentiated by their "version" field; big-endian byte order) as
found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.4.20. A_REAL/SIPR
Codec ID: A_REAL/SIPR
Codec Name: Sipro Voice Codec
Initialization: The Private Data contains either the
"real_audio_v4_props_t" or the "real_audio_v5_props_t" structure
(differentiated by their "version" field; big-endian byte order) as
found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
Lhomme, et al. Expires 5 November 2024 [Page 22]
Internet-Draft Matroska Codec May 2024
4.4.21. A_REAL/RALF
Codec ID: A_REAL/RALF
Codec Name: Real Audio Lossless Format
Initialization: The Private Data contains either the
"real_audio_v4_props_t" or the "real_audio_v5_props_t" structure
(differentiated by their "version" field; big-endian byte order) as
found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.4.22. A_REAL/ATRC
Codec ID: A_REAL/ATRC
Codec Name: Sony Atrac3 Codec
Initialization: The Private Data contains either the
"real_audio_v4_props_t" or the "real_audio_v5_props_t" structure
(differentiated by their "version" field; big-endian byte order) as
found in librmff
(https://github.com/mbunkus/mkvtoolnix/blob/master/lib/librmff/
librmff.h).
4.4.23. A_MS/ACM
Codec ID: A_MS/ACM
Codec Name: Microsoft(TM) Audio Codec Manager (ACM)
Description: The data are stored in little-endian format (like on
IA32 machines).
Initialization: The Private Data contains the [WAVEFORMATEX]
structure including the extra format information bytes. The
structure is stored without packing or padding bytes. A WORD
corresponds to a signed 2 octets integer, DWORD corresponds to a
signed 4 octets integer. The extra format information are appended
after the WAVEFORMATEX octets.
4.4.24. A_AAC/MPEG2/MAIN
Codec ID: A_AAC/MPEG2/MAIN
Codec Name: MPEG2 Main Profile
Lhomme, et al. Expires 5 November 2024 [Page 23]
Internet-Draft Matroska Codec May 2024
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.25. A_AAC/MPEG2/LC
Codec ID: A_AAC/MPEG2/LC
Codec Name: Low Complexity
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.26. A_AAC/MPEG2/LC/SBR
Codec ID: A_AAC/MPEG2/LC/SBR
Codec Name: Low Complexity with Spectral Band Replication
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.27. A_AAC/MPEG2/SSR
Codec ID: A_AAC/MPEG2/SSR
Codec Name: Scalable Sampling Rate
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
Lhomme, et al. Expires 5 November 2024 [Page 24]
Internet-Draft Matroska Codec May 2024
4.4.28. A_AAC/MPEG4/MAIN
Codec ID: A_AAC/MPEG4/MAIN
Codec Name: MPEG4 Main Profile
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.29. A_AAC/MPEG4/LC
Codec ID: A_AAC/MPEG4/LC
Codec Name: Low Complexity
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.30. A_AAC/MPEG4/LC/SBR
Codec ID: A_AAC/MPEG4/LC/SBR
Codec Name: Low Complexity with Spectral Band Replication
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.31. A_AAC/MPEG4/SSR
Codec ID: A_AAC/MPEG4/SSR
Codec Name: Scalable Sampling Rate
Lhomme, et al. Expires 5 November 2024 [Page 25]
Internet-Draft Matroska Codec May 2024
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.32. A_AAC/MPEG4/LTP
Codec ID: A_AAC/MPEG4/LTP
Codec Name: Long Term Prediction
Description: Channel number and sample rate have to be read from the
corresponding audio element. Audio stream is stripped from ADTS
headers and normal Matroska frame based muxing scheme is applied.
AAC audio always uses wFormatTag 0xFF.
Initialization: none
4.4.33. A_QUICKTIME
Codec ID: A_QUICKTIME
Codec Name: Audio taken from QuickTime(TM) files
Description: Several codecs as stored in QuickTime (e.g., QDesign
Music v1 or v2).
Initialization: The Private Data contains all additional data that is
stored in the 'stsd' (sample description) atom in the QuickTime file
*after* the mandatory sound descriptor structure (starting with the
size and FourCC fields). For an explanation of the QuickTime file
format read QuickTime File Format Specification
(https://developer.apple.com/library/mac/documentation/QuickTime/
QTFF/QTFFPreface/qtffPreface.html).
4.4.34. A_QUICKTIME/QDMC
Codec ID: A_QUICKTIME/QDMC
Codec Name: QDesign Music
Description:
Initialization: The Private Data contains all additional data that is
stored in the 'stsd' (sample description) atom in the QuickTime file
*after* the mandatory sound descriptor structure (starting with the
Lhomme, et al. Expires 5 November 2024 [Page 26]
Internet-Draft Matroska Codec May 2024
size and FourCC fields). For an explanation of the QuickTime file
format read QuickTime File Format Specification
(https://developer.apple.com/library/mac/documentation/QuickTime/
QTFF/QTFFPreface/qtffPreface.html).
Superseded By: A_QUICKTIME
4.4.35. A_QUICKTIME/QDM2
Codec ID: A_QUICKTIME/QDM2
Codec Name: QDesign Music v2
Description:
Initialization: The Private Data contains all additional data that is
stored in the 'stsd' (sample description) atom in the QuickTime file
*after* the mandatory sound descriptor structure (starting with the
size and FourCC fields). For an explanation of the QuickTime file
format read QuickTime File Format Specification
(https://developer.apple.com/library/mac/documentation/QuickTime/
QTFF/QTFFPreface/qtffPreface.html).
Superseded By: A_QUICKTIME
4.4.36. A_TTA1
Codec ID: A_TTA1
Codec Name: The True Audio (http://tausoft.org/) lossless audio
compressor
Description: TTA format description (http://tausoft.org/wiki/
True_Audio_Codec_Format) Each frame is kept intact, including the
CRC32. The header and seektable are dropped. SamplingFrequency,
Channels and BitDepth are used in the TrackEntry. wFormatTag = 0x77A1
Initialization: none
4.4.37. A_WAVPACK4
Codec ID: A_WAVPACK4
Codec Name: WavPack (http://www.wavpack.com/) lossless audio
compressor
Lhomme, et al. Expires 5 November 2024 [Page 27]
Internet-Draft Matroska Codec May 2024
Description: The Wavpack packets consist of a stripped header
followed by the frame data. For multi-track (> 2 tracks) a frame
consists of many packets. For more details, check the WavPack muxing
description (wavpack.html).
Codec BlockAdditions: For hybrid A_WAVPACK4 encodings (that include a
lossy encoding with a supplemental correction to produce a lossless
encoding), the correction part is stored in BlockAdditional. The
BlockAddId of the BlockMore containing these data MUST be 1.
Initialization: none
4.4.38. A_ATRAC/AT1
Codec ID: A_ATRAC/AT1
Codec Name: Sony ATRAC1 Codec
Description: The original ATRAC codec by Sony, mainly used in
MiniDisc platforms. The core technical details on ATRAC1 can be
found in [AtracAES]. An example encoder/decoder can be found at
[atracdenc].
Initialization: None
4.5. Subtitle Codec Mappings
4.5.1. S_TEXT/UTF8
Codec ID: S_TEXT/UTF8
Codec Name: UTF-8 Plain Text
Description: Basic text subtitles. For more information see
Section 5 on Subtitles.
4.5.2. S_TEXT/SSA
Codec ID: S_TEXT/SSA
Codec Name: Subtitles Format
Description: The [Script Info] and [V4 Styles] sections are stored in
the codecprivate. Each event is stored in its own Block. For more
information see Section 5.3 on SSA/ASS.
Lhomme, et al. Expires 5 November 2024 [Page 28]
Internet-Draft Matroska Codec May 2024
4.5.3. S_TEXT/ASS
Codec ID: S_TEXT/ASS
Codec Name: Advanced Subtitles Format
Description: The [Script Info] and [V4 Styles] sections are stored in
the codecprivate. Each event is stored in its own Block. For more
information see Section 5.3 on SSA/ASS.
4.5.4. S_TEXT/WEBVTT
Codec ID: S_TEXT/WEBVTT
Codec Name: Web Video Text Tracks Format (WebVTT)
Description: Advanced text subtitles. For more information see
Section 5.4 on WebVTT.
4.5.5. S_IMAGE/BMP
Codec ID: S_IMAGE/BMP
Codec Name: Bitmap
Description: Basic image based subtitle format; The subtitles are
stored as images, like in the DVD [DVD-Video]. The timestamp in the
block header of Matroska indicates the start display time, the
duration is set with the Duration element. The full data for the
subtitle bitmap is stored in the Block's data section.
4.5.6. S_DVBSUB
Codec ID: S_DVBSUB
Codec Name: Digital Video Broadcasting (DVB) subtitles
Description: This is the graphical subtitle format used in the
Digital Video Broadcasting standard. For more information see
Section 5.7 on Digital Video Broadcasting (DVB).
4.5.7. S_VOBSUB
Codec ID: S_VOBSUB
Codec Name: VobSub subtitles
Lhomme, et al. Expires 5 November 2024 [Page 29]
Internet-Draft Matroska Codec May 2024
Description: The same subtitle format used on DVDs [DVD-Video].
Supported is only format version 7 and newer. VobSubs consist of two
files, the .idx containing information, and the .sub, containing the
actual data. The .idx file is stripped of all empty lines, of all
comments and of lines beginning with alt: or langidx:. The line
beginning with id: SHOULD be transformed into the appropriate
Matroska track language element and is discarded. All remaining
lines but the ones containing timestamps and file positions are put
into the CodecPrivate element.
For each line containing the timestamp and file position data is read
from the appropriate position in the .sub file. This data consists
of a MPEG program stream which in turn contains SPU packets. The
MPEG program stream data is discarded, and each SPU packet is put
into one Matroska frame.
4.5.8. S_HDMV/PGS
Codec ID: S_HDMV/PGS
Codec Name: HDMV presentation graphics subtitles (PGS)
Description: This is the graphical subtitle format used on Blu-rays.
For more information, see Section 5.6 on HDMV text presentation.
4.5.9. S_HDMV/TEXTST
Codec ID: S_HDMV/TEXTST
Codec Name: HDMV text subtitles
Description: This is the textual subtitle format used on Blu-rays.
For more information, see Section 5.5 on HDMV graphics presentation.
4.5.10. S_KATE
Codec ID: S_KATE
Codec Name: Karaoke And Text Encapsulation
Description: A subtitle format developed for ogg. The mapping for
Matroska is described on the Xiph wiki
(http://wiki.xiph.org/index.php/OggKate#Matroska_mapping). As for
Theora and Vorbis, Kate headers are stored in the private data as
xiph-laced packets.
Lhomme, et al. Expires 5 November 2024 [Page 30]
Internet-Draft Matroska Codec May 2024
4.5.11. S_ARIBSUB
Codec ID: S_ARIBSUB
Codec Name: ARIB STD-B24 subtitles
Description: This is the textual subtitle format used in the ISDB/
ARIB broadcasting standard. For more information see Section 5.8 on
ARIB (ISDB) subtitles.
4.6. Button Codec Mappings
4.6.1. B_VOBBTN
Codec ID: B_VOBBTN
Codec Name: VobBtn Buttons
Description: Based on MPEG/VOB PCI packets
(http://dvd.sourceforge.net/dvdinfo/pci_pkt.html). The file contains
a header consisting of the string "butonDVD" followed by the width
and height in pixels (16-bit integer each) and 4 reserved bytes. The
rest is full PCI packets (http://dvd.sourceforge.net/dvdinfo/
pci_pkt.html).
4.7. Block Addition Mappings
Registered BlockAddIDType are:
4.7.1. Use BlockAddIDValue
Block type identifier: 0
Block type name: Use BlockAddIDValue
Description: This value indicates that the actual type is stored in
BlockAddIDValue instead. This value is expected to be used when it
is important to have a strong compatibility with players or derived
formats not supporting BlockAdditionMapping but using BlockAdditions
with an unknown BlockAddIDValue, and SHOULD NOT be used if it is
possible to use another value.
4.7.2. Opaque data
Block type identifier: 1
Block type name: Opaque data
Lhomme, et al. Expires 5 November 2024 [Page 31]
Internet-Draft Matroska Codec May 2024
Description: the BlockAdditional data is interpreted as opaque
additional data passed to the codec with the Block data.
BlockAddIDValue MUST be 1.
4.7.3. ITU T.35 metadata
Block type identifier: 4
Block type name: ITU T.35 metadata
Description: the BlockAdditional data is interpreted as ITU T.35
metadata, as defined by ITU-T T.35 terminal codes. BlockAddIDValue
MUST be 4.
4.7.4. avcE
Block type identifier: 0x61766345
Block type name: Dolby Vision enhancement-layer AVC configuration
Description: the BlockAddIDExtraData data is interpreted as the Dolby
Vision enhancement-layer AVC configuration box as described in
[DolbyVisionWithinIso]. This extension MUST NOT be used if Codec ID
is not V_MPEG4/ISO/AVC.
4.7.5. dvcC
Block type identifier: 0x64766343
Block type name: Dolby Vision configuration
Description: the BlockAddIDExtraData data is interpreted as
DOVIDecoderConfigurationRecord structure, as defined in
[DolbyVisionWithinIso], for Dolby Vision profiles less than and equal
to 7.
4.7.6. dvvC
Block type identifier: 0x64767643
Block type name: Dolby Vision configuration
Description: the BlockAddIDExtraData data is interpreted as
DOVIDecoderConfigurationRecord structure, as defined in
[DolbyVisionWithinIso], for Dolby Vision profiles greater than 7.
Lhomme, et al. Expires 5 November 2024 [Page 32]
Internet-Draft Matroska Codec May 2024
4.7.7. hvcE
Block type identifier: 0x68766345
Block type name: Dolby Vision enhancement-layer HEVC configuration
Description: the BlockAddIDExtraData data is interpreted as the Dolby
Vision enhancement-layer HEVC configuration as described in
[DolbyVisionWithinIso]. This extension MUST NOT be used if Codec ID
is not V_MPEGH/ISO/HEVC.
4.7.8. mvcC
Block type identifier: 0x6D766343
Block type name: MVC configuration
Description: the BlockAddIDExtraData data is interpreted as
MVCDecoderConfigurationRecord structure, as defined in
[ISO.14496-15]. This extension MUST NOT be used if Codec ID is not
V_MPEG4/ISO/AVC.
5. Subtitles
Because Matroska is a general container format, we try to avoid
specifying the formats to store in it. This type of work is really
outside of the scope of a container-only format. However, because
the use of subtitles in A/V containers has been so limited (with the
exception of DVD) we are taking the time to specify how to store some
of the more common subtitle formats in Matroska. This is being done
to help facilitate their growth. Otherwise, incompatibilities could
prevent the standardization and use of subtitle storage.
This page is not meant to be a complete listing of all subtitle
formats that will be used in Matroska, it is only meant to be a guide
for the more common, current formats. It is possible that we will
add future formats to this page as they are created, but it is not
likely as any other new subtitle format designer would likely have
their own specifications. Any specification listed here SHOULD be
strictly adhered to or it SHOULD NOT use the corresponding Codec ID.
Here is a list of pointers for storing subtitles in Matroska:
* Any Matroska file containing only subtitles SHOULD use the
extension ".mks".
* As a general rule of thumb for all codecs, information that is
global to an entire stream SHOULD be stored in the CodecPrivate
element.
Lhomme, et al. Expires 5 November 2024 [Page 33]
Internet-Draft Matroska Codec May 2024
* Start and stop timestamps that are used in a timestamps original
storage format SHOULD be removed when being placed in Matroska as
they could interfere if the file is edited afterwards. Instead,
the Blocks timestamp and Duration SHOULD be used to say when the
timestamp is displayed.
* Because a "subtitle" stream is actually just an overlay stream,
anything with a transparency layer could be use, including video.
5.1. Images Subtitles
The first image format that is a goal to import into Matroska is the
VobSub subtitle format. This subtitle type is generated by exporting
the subtitles from a DVD [DVD-Video].
The requirement for muxing VobSub into Matroska is v7 subtitles (see
first line of the .IDX file). If the version is smaller, you must
remux them using the SubResync utility from VobSub 2.23 (or MPC) into
v7 format. Generally any newly created subs will be in v7 format.
The .IFO file will not be used at all.
If there is more than one subtitle stream in the VobSub set, each
stream will need to be separated into separate tracks for storage in
Matroska. E.g. the VobSub file contains streams for both English and
German subtitles. Then the resulting Matroska file SHOULD contain
two tracks. That way the language information can be dropped and
mapped to Matroska's language tags.
The .IDX file is reformatted (see below) and placed in the
CodecPrivate.
Each .BMP will be stored in its own Block. The Timestamp with be
stored in the Blocks Timestamp and the duration will be stored in the
Default Duration.
Here is an example .IDX file:
# VobSub index file, v7 (do not modify this line!)
#
# To repair desynchronization, you can insert gaps this way:
# (it usually happens after vob id changes)
#
# delay: [sign]hh:mm:ss:ms
#
# Where:
# [sign]: +, - (optional)
# hh: hours (0 <= hh)
# mm/ss: minutes/seconds (0 <= mm/ss <= 59)
Lhomme, et al. Expires 5 November 2024 [Page 34]
Internet-Draft Matroska Codec May 2024
# ms: milliseconds (0 <= ms <= 999)
#
# Note: You can't position a sub before the previous with a negative
# value.
#
# You can also modify timestamps or delete a few subs you don't
# like. Just make sure they stay in increasing order.
# Settings
# Original frame size
size: 720x480
# Origin, relative to the upper-left corner, can be overloaded by
# alignment
org: 0, 0
# Image scaling (hor,ver), origin is at the upper-left corner or at
# the alignment coord (x, y)
scale: 100%, 100%
# Alpha blending
alpha: 100%
# Smoothing for very blocky images (use OLD for no filtering)
smooth: OFF
# In millisecs
fadein/out: 50, 50
# Force subtitle placement relative to (org.x, org.y)
align: OFF at LEFT TOP
# For correcting non-progressive desync. (in millisecs or
# hh:mm:ss:ms)
# Note: Not effective in DirectVobSub, use "delay: ... " instead.
time offset: 0
# ON: displays only forced subtitles, OFF: shows everything
forced subs: OFF
# The original palette of the DVD
palette: 000000, 7e7e7e, fbff8b, cb86f1, 7f74b8, e23f06, 0a48ea, \
b3d65a, 6b92f1, 87f087, c02081, f8d0f4, e3c411, 382201, e8840b, \
fdfdfd
# Custom colors (transp idxs and the four colors)
custom colors: OFF, tridx: 0000, colors: 000000, 000000, 000000, \
Lhomme, et al. Expires 5 November 2024 [Page 35]
Internet-Draft Matroska Codec May 2024
000000
# Language index in use
langidx: 0
# English
id: en, index: 0
# Uncomment next line to activate alternative name in DirectVobSub /
# Windows Media Player 6.x
# alt: English
# Vob/Cell ID: 1, 1 (PTS: 0)
timestamp: 00:00:01:101, filepos: 000000000
timestamp: 00:00:08:708, filepos: 000001000
First, lines beginning with "#" are removed. These are comments to
make text file editing easier, and as this is not a text file, they
aren't needed.
Next remove the "langidx" and "id" lines. These are used to
differentiate the subtitle streams and define the language. As the
streams will be stored separately anyway, there is no need to
differentiate them here. Also, the language setting will be stored
in the Matroska tags, so there is no need to store it here.
Finally, the "timestamp" will be used to set the Block's timestamp.
Once it is set there, there is no need for it to be stored here.
Also, as it may interfere if the file is edited, it SHOULD NOT be
stored here.
Once all of these items are removed, the data to store in the
CodecPrivate SHOULD look like this:
size: 720x480
org: 0, 0
scale: 100%, 100%
alpha: 100%
smooth: OFF
fadein/out: 50, 50
align: OFF at LEFT TOP
time offset: 0
forced subs: OFF
palette: 000000, 7e7e7e, fbff8b, cb86f1, 7f74b8, e23f06, 0a48ea, \
b3d65a, 6b92f1, 87f087, c02081, f8d0f4, e3c411, 382201, e8840b, \
fdfdfd
custom colors: OFF, tridx: 0000, colors: 000000, 000000, 000000, \
000000
Lhomme, et al. Expires 5 November 2024 [Page 36]
Internet-Draft Matroska Codec May 2024
There SHOULD also be two Blocks containing one image each with the
timestamps "00:00:01:101" and "00:00:08:708".
5.2. SRT Subtitles
SRT is perhaps the most basic of all subtitle formats.
It consists of four parts, all in text:
1. A number indicating which subtitle it is in the sequence. 2. The
time that the subtitle appears on the screen, and then disappears. 3.
The subtitle itself. 4. A blank line indicating the start of a new
subtitle.
When placing SRT in Matroska, part 3 is converted to UTF-8 (S_TEXT/
UTF8) and placed in the data portion of the Block. Part 2 is used to
set the timestamp of the Block, and BlockDuration element. Nothing
else is used.
Here is an example SRT file:
1
00:02:17,440 --> 00:02:20,375
Senator, we're making
our final approach into Coruscant.
2
00:02:20,476 --> 00:02:22,501
Very good, Lieutenant.
In this example, the text "Senator, we're making our final approach
into Coruscant." would be converted into UTF-8 and placed in the
Block. The timestamp of the block would be set to "00:02:17,440".
And the BlockDuration element would be set to "00:00:02,935".
The same is repeated for the next subtitle.
Because there are no general settings for SRT, the CodecPrivate is
left blank.
5.3. SSA/ASS Subtitles
SSA stands for Sub Station Alpha. It's the file format used by the
popular subtitle editor, SubStation Alpha (http://wiki.multimedia.cx/
index.php?title=SubStation_Alpha). This format is widely used by
fansubbers.
Lhomme, et al. Expires 5 November 2024 [Page 37]
Internet-Draft Matroska Codec May 2024
It allows you to do some advanced display features, like positioning,
karaoke, style managements...
For detailed information on SSA/ASS, see the SSA specs
(http://moodub.free.fr/video/ass-specs.doc). It includes an SSA
specs description and the advanced features added by ASS format
(standing for Advanced SSA). Because SSA and ASS are so similar,
they are treated the same here.
Like SRT, this format is text based with a particular syntax.
A file consists of 4 or 5 parts, declared ala INI file (but it's not
an INI !)
The first, "[Script Info]" contains some information about the
subtitle file, such as it's title, who created it, type of script and
a very important one: "PlayResY". Be careful of this value,
everything in your script (font size, positioning) is scaled by it.
Sub Station Alpha uses your desktops Y resolution to write this
value, so if a friend with a large monitor and a high screen
resolution gives you an edited script, you can mess everything up by
saving the script in SSA with your low-cost monitor.
The second, "[V4 Styles]", is a list of style definitions. A style
describe how will look a text on the screen. It defines font, font
size, primary/.../outile colour, position, alignment, etc.
For example, this:
Format: Name, Fontname, Fontsize, PrimaryColour, SecondaryColour, \
TertiaryColour, BackColour, Bold, Italic, BorderStyle, Outline, \
Shadow, Alignment, MarginL, MarginR, MarginV, AlphaLevel, Encoding
Style: Wolf main,Wolf_Rain,56,15724527,15724527,15724527,4144959,0,\
0,1,1,2,2,5,5,30,0,0
The third, "[Events]", is the list of text you want to display at the
right timing. You can specify some attribute here. Like the style
to use for this event (MUSTbe defined in the list), the position of
the text (Left, Right, Vertical Margin), an effect. Name is mostly
used by translator to know who said this sentence. Timing is in
h:mm:ss.cc (centisec).
Format: Marked, Start, End, Style, Name, MarginL, MarginR, MarginV, \
Effect, Text
Dialogue: Marked=0,0:02:40.65,0:02:41.79,Wolf main,Cher,0000,0000,\
0000,,Et les enregistrements de ses ondes delta ?
Dialogue: Marked=0,0:02:42.42,0:02:44.15,Wolf main,autre,0000,0000,\
0000,,Toujours rien.
Lhomme, et al. Expires 5 November 2024 [Page 38]
Internet-Draft Matroska Codec May 2024
"[Pictures]" or "[Fonts]" part can be found in some SSA file, they
contains UUE-encoded pictures/font but those features are only used
by Sub Station Alpha -- i.e., no filter (Vobsub/Avery Lee Subtiler
filter) use them.
Now, how are they stored in Matroska?
* All text is converted to UTF-8
* All the headers are stored in CodecPrivate (Script Info and the
Styles list)
* Start & End field are used to set TimeStamp and the BlockDuration
element. the data stored is:
* Events are stored in the Block in this order: ReadOrder, Layer,
Style, Name, MarginL, MarginR, MarginV, Effect, Text (Layer comes
from ASS specs ... it's empty for SSA.) "ReadOrder field is
needed for the decoder to be able to reorder the streamed samples
as they were placed originally in the file."
Here is an example of an SSA file.
Lhomme, et al. Expires 5 November 2024 [Page 39]
Internet-Draft Matroska Codec May 2024
[Script Info]
; This is a Sub Station Alpha v4 script.
; For Sub Station Alpha info and downloads,
; go to \
; [http://www.eswat.demon.co.uk/](http://www.eswat.demon.co.uk/)
; or email \
; [kotus@eswat.demon.co.uk](mailto:kotus@eswat.demon.co.uk)
Title: Wolf's rain 2
Original Script: Anime-spirit Ishin-francais
Original Translation: Coolman
Original Editing: Spikewolfwood
Original Timing: Lord_alucard
Original Script Checking: Spikewolfwood
ScriptType: v4.00
Collisions: Normal
PlayResY: 1024
PlayDepth: 0
Wav: 0, 128697,D:\Alex\Anime\- Fansub -\- TAFF -\WR_-_02_Wav.wav
Wav: 0, 120692,H:\team truc\WR_-_02.wav
Wav: 0, 116504,E:\sub\wolf's_rain\WOLF'S RAIN 02.wav
LastWav: 3
Timer: 100,0000
[V4 Styles]
Format: Name, Fontname, Fontsize, PrimaryColour, SecondaryColour, \
TertiaryColour, BackColour, Bold, Italic, BorderStyle, Outline, \
Shadow, Alignment, MarginL, MarginR, MarginV, AlphaLevel, Encoding
Style: Default,Arial,20,65535,65535,65535,-2147483640,-1,0,1,3,0,2,\
30,30,30,0,0
Style: Titre_episode,Akbar,140,15724527,65535,65535,986895,-1,0,1,1,\
0,3,30,30,30,0,0
Style: Wolf main,Wolf_Rain,56,15724527,15724527,15724527,4144959,0,\
0,1,1,2,2,5,5,30,0,0
[Events]
Format: Marked, Start, End, Style, Name, MarginL, MarginR, MarginV, \
Effect, Text
Dialogue: Marked=0,0:02:40.65,0:02:41.79,Wolf main,Cher,0000,0000,\
0000,,Et les enregistrements de ses ondes delta ?
Dialogue: Marked=0,0:02:42.42,0:02:44.15,Wolf main,autre,0000,0000,\
0000,,Toujours rien.
Here is what would be placed into the CodecPrivate element.
Lhomme, et al. Expires 5 November 2024 [Page 40]
Internet-Draft Matroska Codec May 2024
[Script Info]
; This is a Sub Station Alpha v4 script.
; For Sub Station Alpha info and downloads,
; go to \
; [http://www.eswat.demon.co.uk/](http://www.eswat.demon.co.uk/)
; or email \
; [kotus@eswat.demon.co.uk](mailto:kotus@eswat.demon.co.uk)
Title: Wolf's rain 2
Original Script: Anime-spirit Ishin-francais
Original Translation: Coolman
Original Editing: Spikewolfwood
Original Timing: Lord_alucard
Original Script Checking: Spikewolfwood
ScriptType: v4.00
Collisions: Normal
PlayResY: 1024
PlayDepth: 0
Wav: 0, 128697,D:\Alex\Anime\- Fansub -\- TAFF -\WR_-_02_Wav.wav
Wav: 0, 120692,H:\team truc\WR_-_02.wav
Wav: 0, 116504,E:\sub\wolf's_rain\WOLF'S RAIN 02.wav
LastWav: 3
Timer: 100,0000
[V4 Styles]
Format: Name, Fontname, Fontsize, PrimaryColour, SecondaryColour, \
TertiaryColour, BackColour, Bold, Italic, BorderStyle, Outline, \
Shadow, Alignment, MarginL, MarginR, MarginV, AlphaLevel, Encoding
Style: Default,Arial,20,65535,65535,65535,-2147483640,-1,0,1,3,0,2,\
30,30,30,0,0
Style: Titre_episode,Akbar,140,15724527,65535,65535,986895,-1,0,1,1,\
0,3,30,30,30,0,0
Style: Wolf main,Wolf_Rain,56,15724527,15724527,15724527,4144959,0,\
0,1,1,2,2,5,5,30,0,0
And here are the two blocks that would be generated.
Block's timestamp: 00:02:40.650 BlockDuration: 00:00:01.140
1,,Wolf main,Cher,0000,0000,0000,,Et les enregistrements de ses \
ondes delta ?
Block's timestamp: 00:02:42.420 BlockDuration: 00:00:01.730
2,,Wolf main,autre,0000,0000,0000,,Toujours rien.
Lhomme, et al. Expires 5 November 2024 [Page 41]
Internet-Draft Matroska Codec May 2024
5.4. WebVTT
The "Web Video Text Tracks Format" (short: WebVTT) is developed by
the World Wide Web Consortium (W3C) (https://www.w3.org/). Its
specifications are freely available (https://w3c.github.io/webvtt/).
The guiding principles for the storage of WebVTT in Matroska are:
* Consistency: store data in a similar way to other subtitle codecs
* Simplicity: making decoding and remuxing as easy as possible for
existing infrastructures
* Completeness: keeping as much data as possible from the original
WebVTT file
5.4.1. Storage of WebVTT in Matroska
5.4.1.1. CodecID: codec identification
The CodecID to use is S_TEXT/WEBVTT.
5.4.1.2. CodecPrivate: storage of global WebVTT blocks
This element contains all global blocks before the first subtitle
entry. This starts at the "WEBVTT" file identification marker but
excludes the optional byte order mark.
5.4.1.3. Storage of non-global WebVTT blocks
Non-global WebVTT blocks (e.g., "NOTE") before a WebVTT Cue Text are
stored in Matroska's BlockAddition element together with the Matroska
Block containing the WebVTT Cue Text these blocks precede (see below
for the actual format).
5.4.1.4. Storage of Cues in Matroska blocks
Each WebVTT Cue Text is stored directly in the Matroska Block.
A muxer MUST change all WebVTT Cue Timestamps present within the Cue
Text to be relative to the Matroska Block's timestamp.
The Cue's start timestamp is used as the Matroska Block's timestamp.
The difference between the Cue's end timestamp and its start
timestamp is used as the Matroska Block's duration.
Lhomme, et al. Expires 5 November 2024 [Page 42]
Internet-Draft Matroska Codec May 2024
5.4.1.5. BlockAdditions: storing non-global WebVTT blocks, Cue Settings
Lists and Cue identifiers
Each Matroska Block may be accompanied by one BlockAdditions element.
Its format is as follows:
1. The first line contains the WebVTT Cue Text's optional Cue
Settings List followed by one line feed character (U+0x000a).
The Cue Settings List may be empty, in which case the line
consists of the line feed character only.
2. The second line contains the WebVTT Cue Text's optional Cue
Identifier followed by one line feed character (U+0x000a). The
line may be empty indicating that there was no Cue Identifier in
the source file, in which case the line consists of the line feed
character only.
3. The third and all following lines contain all WebVTT Comment
Blocks that precede the current WebVTT Cue Block. These may be
absent.
If there is no Matroska BlockAddition element stored together with
the Matroska Block, then all three components (Cue Settings List, Cue
Identifier, Cue Comments) MUST be assumed to be absent.
5.4.2. Examples of transformation
Here's an example how a WebVTT is transformed.
5.4.2.1. Example WebVTT file
Let's take the following example file:
WEBVTT with text after the signature
STYLE
::cue {
background-image: linear-gradient(to bottom, dimgray, lightgray);
color: papayawhip;
}
/* Style blocks cannot use blank lines nor "dash dash greater \
than" */
NOTE comment blocks can be used between style blocks.
STYLE
::cue(b) {
color: peachpuff;
}
Lhomme, et al. Expires 5 November 2024 [Page 43]
Internet-Draft Matroska Codec May 2024
REGION
id:bill
width:40%
lines:3
regionanchor:0%,100%
viewportanchor:10%,90%
scroll:up
NOTE
Notes always span a whole block and can cover multiple
lines. Like this one.
An empty line ends the block.
hello
00:00:00.000 --> 00:00:10.000
Example entry 1: Hello world.
NOTE style blocks cannot appear after the first cue.
00:00:25.000 --> 00:00:35.000
Example entry 2: Another entry.
This one has multiple lines.
00:01:03.000 --> 00:01:06.500 position:90% align:right size:35%
Example entry 3: That stuff to the right of the timestamps are cue \
settings.
00:03:10.000 --> 00:03:20.000
Example entry 4: Entries can even include timestamps.
For example:<00:03:15.000>This becomes visible five seconds
after the first part.
5.4.2.2. Example of CodecPrivate
The resulting CodecPrivate element will look like this:
Lhomme, et al. Expires 5 November 2024 [Page 44]
Internet-Draft Matroska Codec May 2024
WEBVTT with text after the signature
STYLE
::cue {
background-image: linear-gradient(to bottom, dimgray, lightgray);
color: papayawhip;
}
/* Style blocks cannot use blank lines nor "dash dash greater \
than" */
NOTE comment blocks can be used between style blocks.
STYLE
::cue(b) {
color: peachpuff;
}
REGION
id:bill
width:40%
lines:3
regionanchor:0%,100%
viewportanchor:10%,90%
scroll:up
NOTE
Notes always span a whole block and can cover multiple
lines. Like this one.
An empty line ends the block.
5.4.2.3. Storage of Cue 1
Example Cue 1: timestamp 00:00:00.000, duration 00:00:10.000, Block's
content:
Example entry 1: Hello world.
BlockAddition's content starts with one empty line as there's no Cue
Settings List:
hello
5.4.2.4. Storage of Cue 2
Example Cue 2: timestamp 00:00:25.000, duration 00:00:10.000, Block's
content:
Lhomme, et al. Expires 5 November 2024 [Page 45]
Internet-Draft Matroska Codec May 2024
Example entry 2: Another entry.
This one has multiple lines.
BlockAddition's content starts with two empty lines as there's
neither a Cue Settings List nor a Cue Identifier:
NOTE style blocks cannot appear after the first cue.
5.4.2.5. Storage of Cue 3
Example Cue 3: timestamp 00:01:03.000, duration 00:00:03.500, Block's
content:
Example entry 3: That stuff to the right of the timestamps are cue \
settings.
BlockAddition's content ends with an empty line as there's no Cue
Identifier and there were no WebVTT Comment blocks:
position:90% align:right size:35%
5.4.2.6. Storage of Cue 4
Example Cue 4: timestamp 00:03:10.000, duration 00:00:10.000, Block's
content:
Example entry 4: Entries can even include timestamps. For
example:00:00:05.000 (00:00:05.000)This becomes visible five seconds
after the first part.
This Block does not need a BlockAddition as the Cue did not contain
an Identifier, nor a Settings List, and it wasn't preceded by Comment
blocks.
5.4.3. Storage of WebVTT in Matroska vs. WebM
Note: the storage of WebVTT in Matroska is not the same as the design
document for storage of WebVTT in WebM. There are several reasons
for this including but not limited to: the WebM document is old (from
February 2012) and was based on an earlier draft of WebVTT and
ignores several parts that were added to WebVTT later; WebM does
still not support subtitles at all (http://www.webmproject.org/docs/
container/); the proposal suggests splitting the information across
multiple tracks making demuxer's and remuxer's life very difficult.
Lhomme, et al. Expires 5 November 2024 [Page 46]
Internet-Draft Matroska Codec May 2024
5.5. HDMV presentation graphics subtitles
The specifications for the HDMV presentation graphics subtitle format
(short: HDMV PGS) can be found in the document "Blu-ray Disc Read-
Only Format; Part 3 — Audio Visual Basic Specifications" in section
9.14 "HDMV graphics streams".
5.5.1. Storage of HDMV presentation graphics subtitles
The CodecID to use is S_HDMV/PGS. A CodecPrivate element is not
used.
5.5.1.1. Storage of HDMV PGS Segments in Matroska Blocks
Each HDMV PGS Segment (short: Segment) will be stored in a Matroska
Block. A Segment is the data structure described in section 9.14.2.1
"Segment coding structure and parameters" of the Blu-ray
specifications.
Each Segment contains a presentation timestamp. This timestamp will
be used as the timestamp for the Matroska Block.
A Segment is normally shown until a subsequent Segment is
encountered. Therefore, the Matroska Block MAY have no Duration. In
that case, a player MUST display a Segment within a Matroska Block
until the next Segment is encountered.
A muxer MAY use a Duration, e.g., by calculating the distance between
two subsequent Segments. If a Matroska Block has a Duration, a
player MUST display that Segment only for the duration of the Block's
Duration.
5.6. HDMV text subtitles
The specifications for the HDMV text subtitle format (short: HDMV
TextST) can be found in the document "Blu-ray Disc Read-Only Format;
Part 3 — Audio Visual Basic Specifications" in section 9.15 "HDMV
text subtitle streams".
5.6.1. Storage of HDMV text subtitles
The CodecID to use is S_HDMV/TEXTST.
A CodecPrivate Element is required. It MUST contain the stream's
Dialog Style Segment as described in section 9.15.4.2 "Dialog Style
Segment" of the Blu-ray specifications.
Lhomme, et al. Expires 5 November 2024 [Page 47]
Internet-Draft Matroska Codec May 2024
5.6.1.1. Storage of HDMV TextST Dialog Presentation Segments in
Matroska Blocks
Each HDMV Dialog Presentation Segment (short: Segment) will be stored
in a Matroska Block. A Segment is the data structure described in
section 9.15.4.3 "Dialog presentation segment" of the Blu-ray
specifications.
Each Segment contains a start and an end presentation timestamp
(short: start PTS & end PTS). The start PTS will be used as the
timestamp for the Matroska Block. The Matroska Block MUST have a
Duration, and that Duration is the difference between the end PTS and
the start PTS.
A player MUST use the Matroska Block's timestamp and Duration instead
of the Segment's start and end PTS for determining when and how long
to show the Segment.
5.6.1.2. Character set
When TextST subtitles are stored inside Matroska, the only allowed
character set is UTF-8.
Each HDMV text subtitle stream in a Blu-ray can use one of a handful
of character sets. This information is not stored in the MPEG2
Transport Stream itself but in the accompanying Clip Information
file.
Therefore, a muxer MUST parse the accompanying Clip Information file.
If the information indicates a character set other than UTF-8, it
MUST re-encode all text Dialog Presentation Segments from the
indicated character set to UTF-8 prior to storing them in Matroska.
5.7. Digital Video Broadcasting (DVB) subtitles
The specifications for the Digital Video Broadcasting subtitle
bitstream format (short: DVB subtitles) can be found in the document
"ETSI EN 300 743 - Digital Video Broadcasting (DVB); Subtitling
systems". The storage of DVB subtitles in MPEG transport streams is
specified in the document "ETSI EN 300 468 - Digital Video
Broadcasting (DVB); Specification for Service Information (SI) in DVB
systems".
Lhomme, et al. Expires 5 November 2024 [Page 48]
Internet-Draft Matroska Codec May 2024
5.7.1. Storage of DVB subtitles
5.7.1.1. CodecID
The CodecID to use is S_DVBSUB.
5.7.1.2. CodecPrivate
The CodecPrivate element is five bytes long and has the following
structure:
* 2 bytes: composition page ID (bit string, left bit first)
* 2 bytes: ancillary page ID (bit string, left bit first)
* 1 byte: subtitling type (bit string, left bit first)
The semantics of these bytes are the same as the ones described in
section 6.2.41 "Subtitling descriptor" of ETSI EN 300 468.
5.7.1.3. Storage of DVB subtitles in Matroska Blocks
Each Matroska Block consists of one or more DVB Subtitle Segments as
described in segment 7.2 "Syntax and semantics of the subtitling
segment" of ETSI EN 300 743.
Each Matroska Block SHOULD have a Duration indicating how long the
DVB Subtitle Segments in that Block SHOULD be displayed.
5.8. ARIB (ISDB) subtitles
The specifications for the ARIB B-24 subtitle bitstream format
(short: ARIB subtitles) and its storage in MPEG transport streams can
be found in the documents [ARIB.STD-B24], [ARIB.STD-B10], and
[ARIB.TR-B14].
5.8.1. Storage of ARIB subtitles
5.8.1.1. CodecID
The CodecID to use is S_ARIBSUB.
5.8.1.2. CodecPrivate
The CodecPrivate element is three bytes long and has the following
structure:
* 1 byte: component tag (bit string, left bit first)
* 2 bytes: data component ID (bit string, left bit first)
Lhomme, et al. Expires 5 November 2024 [Page 49]
Internet-Draft Matroska Codec May 2024
The semantics of the component tag are the same as those described in
[ARIB.STD-B10], part 2, Annex J. The semantics of the data component
ID are the same as those described in [ARIB.TR-B14], fascicle 2, Vol.
3, Section 2, 4.2.8.1.
5.8.1.3. Storage of ARIB subtitles in Matroska Blocks
Each Matroska Block consists of a single synchronized PES data
structure as described in chapter 5 "Independent PES transmission
protocol" of [ARIB.STD-B24], volume 3, with a
Synchronized_PES_data_byte block containing one or more ISDB Caption
Data Groups as described in chapter 9 "Transmission of caption and
superimpose" of [ARIB.STD-B24], volume 1, part 3. All of the Caption
Statement Data Groups in a given Matroska Track MUST use the same
language index.
A Data Group is normally shown until a subsequent Group provides
instructions to clear it. Therefore, the Matroska Block SHOULD NOT
have a Duration. A player SHOULD display a Data Group within a
Matroska Block until its internal duration elapses, or until a
subsequent Data Group removes it.
6. Block Additional Mapping
Extra data or metadata can be added to each Block using
BlockAdditional data. Each BlockAdditional contains a BlockAddID
that identifies the kind of data it contains. When the BlockAddID is
set to "1" the contents of the BlockAdditional Element are define by
the Codec Mappings defines; see Section 4.1.5. When the BlockAddID
is set a value greater than "1", then the contents of the
BlockAdditional Element are defined by the BlockAdditionalMapping
Element, within the associated Track Element, where the BlockAddID
Element of BlockAdditional Element equals the BlockAddIDValue of the
associated Track's BlockAdditionalMapping Element. That
BlockAdditionalMapping Element identifies a particular Block
Additional Mapping by the BlockAddIDType.
The following XML depicts a use of a Block Additional Mapping to
associate a timecode value with a Block:
Lhomme, et al. Expires 5 November 2024 [Page 50]
Internet-Draft Matroska Codec May 2024
1
568001708
1
2
timecode
12
V_FFV1
3000
{binary video frame}
2
01:00:00:00
Block Additional Mappings detail how additional data MAY be stored in
the BlockMore Element with a BlockAdditionMapping Element, within the
Track Element, which identifies the BlockAdditional content. Block
Additional Mappings define the BlockAddIDType value reserved to
identify that type of data as well as providing an optional label
stored within the BlockAddIDName Element. When the Block Additional
Mapping is dependent on additional contextual information, then the
Mapping SHOULD describe how such additional contextual information is
stored within the BlockAddIDExtraData Element.
The following Block Additional Mappings are defined.
Lhomme, et al. Expires 5 November 2024 [Page 51]
Internet-Draft Matroska Codec May 2024
6.1. Summary of Assigned BlockAddIDType Values
For convenience, the following table shows the assigned
BlockAddIDType values along with the BlockAddIDName and Citation.
+================+========================+=============+
| BlockAddIDType | BlockAddIDName | Citation |
+================+========================+=============+
| 121 | SMPTE ST 12-1 timecode | Section 6.2 |
+----------------+------------------------+-------------+
Table 4
6.2. SMPTE ST 12-1 Timecode
6.2.1. Timecode Description
SMPTE ST 12-1 timecode values can be stored in the BlockMore Element
to associate the content of a Matroska Block with a particular
timecode value. If the Block uses Lacing, the timecode value is
associated with the first frame of the Lace.
The Block Additional Mapping contains a full binary representation of
a 64 bit SMPTE timecode value stored in big-endian format and
expressed exactly as defined in Section 8 and 9 of SMPTE 12M [ST12].
For convenience, here are the bit assignments for a SMPTE ST 12-1
binary representation as described in Section 6.2 of [RFC5484]:
+===============+========================+
| Bit Positions | Label |
+===============+========================+
| 0--3 | Units of frames |
+---------------+------------------------+
| 4--7 | First binary group |
+---------------+------------------------+
| 8--9 | Tens of frames |
+---------------+------------------------+
| 10 | Drop frame flag |
+---------------+------------------------+
| 11 | Color frame flag |
+---------------+------------------------+
| 12--15 | Second binary group |
+---------------+------------------------+
| 16--19 | Units of seconds |
+---------------+------------------------+
| 20--23 | Third binary group |
+---------------+------------------------+
| 24--26 | Tens of seconds |
Lhomme, et al. Expires 5 November 2024 [Page 52]
Internet-Draft Matroska Codec May 2024
+---------------+------------------------+
| 27 | Polarity correction |
+---------------+------------------------+
| 28--31 | Fourth binary group |
+---------------+------------------------+
| 32--35 | Units of minutes |
+---------------+------------------------+
| 36--39 | Fifth binary group |
+---------------+------------------------+
| 40--42 | Tens of minutes |
+---------------+------------------------+
| 43 | Binary group flag BGF0 |
+---------------+------------------------+
| 44--47 | Sixth binary group |
+---------------+------------------------+
| 48--51 | Units of hours |
+---------------+------------------------+
| 52--55 | Seventh binary group |
+---------------+------------------------+
| 56--57 | Tens of hours |
+---------------+------------------------+
| 58 | Binary group flag BGF1 |
+---------------+------------------------+
| 59 | Binary group flag BGF2 |
+---------------+------------------------+
| 60--63 | Eighth binary group |
+---------------+------------------------+
Table 5
For example, a timecode value of "07:32:54;18" can be expressed as a
64 bit SMPTE 12M value as:
10000000 01100000 01100000 01010000
00100000 00110000 01110000 00000000
6.2.2. BlockAddIDType
The BlockAddIDType value reserved for timecode is "121".
6.2.3. BlockAddIDName
The BlockAddIDName value reserved for timecode is "SMPTE ST 12-1
timecode".
Lhomme, et al. Expires 5 November 2024 [Page 53]
Internet-Draft Matroska Codec May 2024
6.2.4. BlockAddIDExtraData
BlockAddIDExtraData is unused within this block additional mapping.
7. Security Considerations
This document inherits security considerations from the EBML
[RFC8794] and Matroska [Matroska] documents.
8. IANA Considerations
To be determined.
9. References
9.1. Normative References
[ARIB.STD-B10]
ARIB, "Service Information for Digital Broadcasting
System", 5 December 2019,
.
[ARIB.STD-B24]
ARIB, "Data Coding and Transmission Specification for
Digital Broadcasting", 6 October 2022,
.
[ARIB.TR-B14]
ARIB, "Operational Guidelines for Digital Terrestrial
Television Broadcasting", 6 October 2022,
.
[DolbyVisionWithinIso]
Dolby, "Dolby Vision Streams Within the ISO Base MediaFile
Format", 7 February 2020,
.
[IEEE.1857-10]
IEEE, "IEEE Standard for Third Generation Video Coding", 9
November 2021,
.
Lhomme, et al. Expires 5 November 2024 [Page 54]
Internet-Draft Matroska Codec May 2024
[IEEE.1857-4]
IEEE, "IEEE Standard for Second-Generation IEEE 1857 Video
Coding", 23 October 2018,
.
[IEEE.754] IEEE, "IEEE Standard for Binary Floating-Point
Arithmetic", 13 June 2019,
.
[ISO.14496-15]
International Organization for Standardization,
"Information technology — Coding of audio-visual objects —
Part 15: Carriage of network abstraction layer (NAL) unit
structured video in ISO base media file format",
ISO Standard 14496, 2014.
[Matroska] Lhomme, S., Bunkus, M., and D. Rice, "Media Container
Specifications", Work in Progress, Internet-Draft, draft-
ietf-cellar-matroska-10, 1 May 2022,
.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
.
[RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet:
Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002,
.
[RFC6386] Bankoski, J., Koleszar, J., Quillio, L., Salonen, J.,
Wilkins, P., and Y. Xu, "VP8 Data Format and Decoding
Guide", RFC 6386, DOI 10.17487/RFC6386, November 2011,
.
[RFC6648] Saint-Andre, P., Crocker, D., and M. Nottingham,
"Deprecating the "X-" Prefix and Similar Constructs in
Application Protocols", BCP 178, RFC 6648,
DOI 10.17487/RFC6648, June 2012,
.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, .
Lhomme, et al. Expires 5 November 2024 [Page 55]
Internet-Draft Matroska Codec May 2024
[RFC8794] Lhomme, S., Rice, D., and M. Bunkus, "Extensible Binary
Meta Language", RFC 8794, DOI 10.17487/RFC8794, July 2020,
.
[ST12] SMPTE, "Time and Control Code", ST ST 12-1:2014, DOI
10.5594/SMPTE.ST12-1.2014, 20 February 2014,
.
[WAVEFORMATEX]
Microsoft Corporation, "WAVEFORMATEX structure", 4 April
2021, .
9.2. Informative References
[AtracAES] Sony Corporate Research Laboratories, "ATRAC: Adaptive
Transform Acoustic Coding for MiniDisc", 1 October 1992,
.
[atracdenc]
Cherednik, D., "atracdenc - ATRAC1 and ATRAC3 Decoder/
Encoder", 12 October 2022,
.
[DVD-Video]
DVD Forum, "DVD-Books: Part 3 DVD-Video Book", November
1995, .
[RFC5484] Singer, D., "Associating Time-Codes with RTP Streams",
RFC 5484, DOI 10.17487/RFC5484, March 2009,
.
Authors' Addresses
Steve Lhomme
Email: slhomme@matroska.org
Moritz Bunkus
Email: moritz@bunkus.org
Dave Rice
Email: dave@dericed.com
Lhomme, et al. Expires 5 November 2024 [Page 56]