;ELC   
;;; compiled by rms@mole.gnu.ai.mit.edu on Fri May 13 13:18:26 1994
;;; from file /home/fsf/rms/e19/lisp/texinfo.el
;;; emacs version 19.22.91.5.
;;; bytecomp version FSF 2.10
;;; optimization is on.
;;; this file uses opcodes which do not exist in Emacs 18.

(if (and (boundp 'emacs-version)
	 (or (and (boundp 'epoch::version) epoch::version)
	     (string-lessp emacs-version "19")))
    (error "`/home/fsf/rms/e19/lisp/texinfo.el' was compiled for Emacs 19"))

(autoload (quote makeinfo-region) "makeinfo" "\
Make Info file from region of current Texinfo file, and switch to it.

This command does not offer the `next-error' feature since it would
apply to a temporary file, not the original; use the `makeinfo-buffer'
command to gain use of `next-error'." t nil)
(autoload (quote makeinfo-buffer) "makeinfo" "\
Make Info file from current buffer.

Use the \\[next-error] command to move to the next error 
(if there are errors)." t nil)
(autoload (quote kill-compilation) "compile" "\
Kill the process made by the \\[compile] command." t nil)
(autoload (quote makeinfo-recenter-compilation-buffer) "makeinfo" "\
Redisplay `*compilation*' buffer so most recent output can be seen.
The last line of the buffer is displayed on
line LINE of the window, or centered if LINE is nil." t nil)
(autoload (quote texinfo-make-menu) "texnfo-upd" "\
Without any prefix argument, make or update a menu.
Make the menu for the section enclosing the node found following point.

Non-nil argument (prefix, if interactive) means make or update menus
for nodes within or part of the marked region.

Whenever a menu exists, and is being updated, the descriptions that
are associated with node names in the pre-existing menu are
incorporated into the new menu.  Otherwise, the nodes' section titles
are inserted as descriptions." t nil)
(autoload (quote texinfo-all-menus-update) "texnfo-upd" "\
Update every regular menu in a Texinfo file.
Remove pre-existing master menu, if there is one.

If called with a non-nil argument, this function first updates all the
nodes in the buffer before updating the menus." t nil)
(autoload (quote texinfo-master-menu) "texnfo-upd" "\
Make a master menu for a whole Texinfo file.
Non-nil argument (prefix, if interactive) means first update all
existing nodes and menus.  Remove pre-existing master menu, if there is one.

This function creates a master menu that follows the top node.  The
master menu includes every entry from all the other menus.  It
replaces any existing ordinary menu that follows the top node.

If called with a non-nil argument, this function first updates all the
menus in the buffer (incorporating descriptions from pre-existing
menus) before it constructs the master menu.

The function removes the detailed part of an already existing master
menu.  This action depends on the pre-exisitng master menu using the
standard `texinfo-master-menu-header'.

The master menu has the following format, which is adapted from the
recommendation in the Texinfo Manual:

   * The first part contains the major nodes in the Texinfo file: the
     nodes for the chapters, chapter-like sections, and the major
     appendices.  This includes the indices, so long as they are in
     chapter-like sections, such as unnumbered sections.

   * The second and subsequent parts contain a listing of the other,
     lower level menus, in order.  This way, an inquirer can go
     directly to a particular node if he or she is searching for
     specific information.

Each of the menus in the detailed node listing is introduced by the
title of the section containing the menu." t nil)
(autoload (quote texinfo-indent-menu-description) "texnfo-upd" "\
Indent every description in menu following point to COLUMN.  
Non-nil argument (prefix, if interactive) means indent every
description in every menu in the region.  Does not indent second and
subsequent lines of a multi-line description." t nil)
(autoload (quote texinfo-insert-node-lines) "texnfo-upd" "\
Insert missing `@node' lines in region of Texinfo file.
Non-nil argument (prefix, if interactive) means also to insert the
section titles as node names; and also to insert the section titles as
node names in pre-existing @node lines that lack names." t nil)
(autoload (quote texinfo-start-menu-description) "texnfo-upd" "\
In this menu entry, insert the node's section title as a description. 
Position point at beginning of description ready for editing.
Do not insert a title if the line contains an existing description.

You will need to edit the inserted text since a useful description
complements the node name rather than repeats it as a title does." t nil)
(autoload (quote texinfo-multiple-files-update) "texnfo-upd" "\
Update first node pointers in each file included in OUTER-FILE;
create or update main menu in the outer file that refers to such nodes. 
This does not create or update menus or pointers within the included files.

With optional MAKE-MASTER-MENU argument (prefix arg, if interactive),
insert a master menu in OUTER-FILE.  This does not create or update
menus or pointers within the included files.

With optional UPDATE-EVERYTHING argument (numeric prefix arg, if
interactive), update all the menus and all the `Next', `Previous', and
`Up' pointers of all the files included in OUTER-FILE before inserting
a master menu in OUTER-FILE.

The command also updates the `Top' level node pointers of OUTER-FILE.

Notes: 

  * this command does NOT save any files--you must save the
    outer file and any modified, included files.

  * except for the `Top' node, this command does NOT handle any
    pre-existing nodes in the outer file; hence, indices must be
    enclosed in an included file.

Requirements:

  * each of the included files must contain exactly one highest
    hierarchical level node, 
  * this highest node must be the first node in the included file,
  * each highest hierarchical level node must be of the same type.

Thus, normally, each included file contains one, and only one,
chapter." t nil)
(byte-code "ÀÁ!„ Â	„E Ã ÄÅÆ	#ˆÄÇÆ	#ˆÄÈÉ	#ˆÄÊÉ	#ˆÄËÌ	#ˆÄÍÎ	#ˆÄÏÐ	#ˆÄÑÒ	#ˆÄÓÔ	#ˆÀÕ!„N ÂÂ‡" [boundp texinfo-mode-syntax-table nil make-syntax-table modify-syntax-entry 34 " " 92 64 "\\" 17 91 "(]" 93 ")[" 123 "(}" 125 "){" 39 "w" texinfo-mode-map] 4)
(defalias 'texinfo-define-common-keys #[(keymap) "À	ÂÃ#ˆÀ	ÄÅ#ˆÀ	ÆÇ#ˆÀ	ÈÉ#ˆÀ	ÊË#ˆÀ	ÌÍ#ˆÀ	ÎÏ#ˆÀ	ÐÑ#ˆÀ	ÒÓ#‡" [define-key keymap "" tex-kill-job "" texinfo-quit-job "\f" tex-recenter-output-buffer "" texinfo-delete-from-print-queue "" tex-show-print-queue "" texinfo-tex-print "	" texinfo-texindex "" texinfo-tex-region "" texinfo-tex-buffer] 4 "\
Define the keys both in Texinfo mode and in the texinfo-tex-shell."])
(byte-code "„³ Á Â!ˆÃÄÅ#ˆÃÆÇ#ˆÃÈÉ#ˆÃÊË#ˆÃÌÍ#ˆÃÎÏ#ˆÃÐÑ#ˆÃÒÓ#ˆÃÔÕ#ˆÃÖ×#ˆÃØÙ#ˆÃÚÛ#ˆÃÜÝ#ˆÃÞÝ#ˆÃßà#ˆÃáâ#ˆÃãä#ˆÃåæ#ˆÃçè#ˆÃéê#ˆÃëì#ˆÃíî#ˆÃïð#ˆÃñò#ˆÃóô#ˆÃõö#ˆÃ÷ø#ˆÃùú#ˆÁ‡" [texinfo-mode-map make-sparse-keymap texinfo-define-common-keys define-key "" kill-compilation "\f" makeinfo-recenter-compilation-buffer "" makeinfo-region "" makeinfo-buffer "" texinfo-format-region "" texinfo-format-buffer "m" texinfo-master-menu "" texinfo-make-menu "" texinfo-update-node "" texinfo-every-node-update "" texinfo-all-menus-update "" texinfo-show-structure "}" up-list "]" "{" texinfo-insert-braces "" texinfo-start-menu-description "v" texinfo-insert-@var "t" texinfo-insert-@table "s" texinfo-insert-@samp "o" texinfo-insert-@noindent "n" texinfo-insert-@node "k" texinfo-insert-@kbd "i" texinfo-insert-@item "f" texinfo-insert-@file "x" texinfo-insert-@example "e" texinfo-insert-@end "d" texinfo-insert-@dfn "c" texinfo-insert-@code] 4)
(defvar texinfo-chapter-level-regexp "chapter\\|unnumbered \\|appendix \\|majorheading\\|chapheading" "\
Regular expression matching Texinfo chapter-level headings.
This does not match `@node' and does not match the `@top' command.")
(defalias 'texinfo-mode #[nil "À ˆÁÃÅ!ˆÇ!ˆÉÊ!ˆË\fÍQ\nÉÎ!ˆÏÉÐ!ˆÑÉÒ!ˆÓPÉÔ!ˆÓPÉÕ!ˆÖÉ×!ˆØÉÙ!ˆÚÉÛ!ˆÏÉÜ!ˆÝÉÞ!ˆßàáâ\"‡" [text-mode "Texinfo" mode-name texinfo-mode major-mode use-local-map texinfo-mode-map set-syntax-table texinfo-mode-syntax-table make-local-variable page-delimiter "^@node [ 	]*[Tt]op\\|^@\\(" texinfo-chapter-level-regexp "\\)" require-final-newline t indent-tabs-mode nil paragraph-separate "^\\|^@[a-zA-Z]*[ \n]\\|" paragraph-start fill-column 72 comment-start "@c " comment-start-skip "@c +" words-include-escapes tex-start-of-header "%**start" tex-end-of-header "%**end" run-hooks text-mode-hook texinfo-mode-hook] 3 "\
Major mode for editing Texinfo files.

  It has these extra commands:
\\{texinfo-mode-map}

  These are files that are used as input for TeX to make printed manuals
and also to be turned into Info files with \\[makeinfo-buffer] or
the `makeinfo' program.  These files must be written in a very restricted and
modified version of TeX input format.

  Editing commands are like text-mode except that the syntax table is
set up so expression commands skip Texinfo bracket groups.  To see
what the Info version of a region of the Texinfo file will look like,
use \\[makeinfo-region], which runs `makeinfo' on the current region.

  You can show the structure of a Texinfo file with \\[texinfo-show-structure].
This command shows the structure of a Texinfo file by listing the
lines with the @-sign commands for @chapter, @section, and the like.
These lines are displayed in another window called the *Occur* window.
In that window, you can position the cursor over one of the lines and
use \\[occur-mode-goto-occurrence], to jump to the corresponding spot
in the Texinfo file.

  In addition, Texinfo mode provides commands that insert various
frequently used @-sign commands into the buffer.  You can use these
commands to save keystrokes.  And you can insert balanced braces with
\\[texinfo-insert-braces] and later use the command \\[up-list] to
move forward past the closing brace.

Also, Texinfo mode provides functions for automatically creating or
updating menus and node pointers.  These functions

  * insert the `Next', `Previous' and `Up' pointers of a node,
  * insert or update the menu for a section, and
  * create a master menu for a Texinfo source file.

Here are the functions:

    texinfo-update-node                \\[texinfo-update-node]
    texinfo-every-node-update          \\[texinfo-every-node-update]
    texinfo-sequential-node-update 

    texinfo-make-menu                  \\[texinfo-make-menu]
    texinfo-all-menus-update           \\[texinfo-all-menus-update]
    texinfo-master-menu

    texinfo-indent-menu-description (column &optional region-p)

The `texinfo-column-for-description' variable specifies the column to
which menu descriptions are indented. 

Passed an argument (a prefix argument, if interactive), the
`texinfo-update-node' and `texinfo-make-menu' functions do their jobs
in the region.

To use the updating commands, you must structure your Texinfo file
hierarchically, such that each `@node' line, with the exception of the
Top node, is accompanied by some kind of section line, such as an
`@chapter' or `@section' line.

If the file has a `top' node, it must be called `top' or `Top' and
be the first node in the file.

Entering Texinfo mode calls the value of text-mode-hook, and then the
value of texinfo-mode-hook." nil])
(defconst texinfo-environment-regexp "^@\\(f?table\\|enumerate\\|itemize\\|ifinfo\\|iftex\\|ifset\\|ifclear\\|example\\|quotation\\|lisp\\|smallexample\\|smalllisp\\|display\\|format\\|flushleft\\|flushright\\|ignore\\|group\\|tex\\|cartouche\\|end\\|def[a-z]*\\)" "\
Regexp for environment-like Texinfo list commands.
Subexpression 1 is what goes into the corresponding `@end' statement.")
(defalias 'texinfo-insert-@end #[nil "ÀÁŠÄVƒ( ÅÁÇ#ƒ( ÈÉ!ƒ! T‰‚% S‰„ È!ˆÀ”À•{)Êcˆ\n…? \nË±*‡" [1 nil string depth 0 re-search-backward texinfo-environment-regexp t looking-at "@end" "@end " "\n"] 4 "\
Insert the matching `@end' for the last Texinfo command that needs one." nil])
(defalias (quote texinfo-insert-@-with-arg) #[(string &optional arg) "ƒ4 Á!‰ÂWƒ\" ÃÄxˆŠÅ!ˆÆÈ±ˆ)Éc‡ÃÄwˆÆÈ±ˆÅ!ˆÉc‡ÆÊ±ˆË ‡" [arg prefix-numeric-value 0 " 	\n\f" nil forward-sexp "@" string "{" "}" "{}" backward-char] 4])
(defalias 'texinfo-insert-braces #[nil "ÀcˆÁ ‡" ["{}" backward-char] 1 "\
Make a pair of braces and be poised to type inside of them.
Use \\[up-list] to move forward out of the braces." nil])
(defalias 'texinfo-insert-@code #[(&optional arg) "ÀÁ\n\"‡" [texinfo-insert-@-with-arg "code" arg] 3 "\
Insert a `@code{...}' command in a Texinfo buffer.
A numeric argument says how many words the braces should surround.
The default is not to surround any existing words with the braces." "P"])
(defalias 'texinfo-insert-@dfn #[(&optional arg) "ÀÁ\n\"‡" [texinfo-insert-@-with-arg "dfn" arg] 3 "\
Insert a `@dfn{...}' command in a Texinfo buffer.
A numeric argument says how many words the braces should surround.
The default is not to surround any existing words with the braces." "P"])
(defalias 'texinfo-insert-@example #[nil "Àc‡" ["@example\n"] 1 "\
Insert the string `@example' in a Texinfo buffer." nil])
(defalias 'texinfo-insert-@file #[(&optional arg) "ÀÁ\n\"‡" [texinfo-insert-@-with-arg "file" arg] 3 "\
Insert a `@file{...}' command in a Texinfo buffer.
A numeric argument says how many words the braces should surround.
The default is not to surround any existing words with the braces." "P"])
(defalias 'texinfo-insert-@item #[nil "ÀcˆÁ ‡" ["@item" newline] 1 "\
Insert the string `@item' in a Texinfo buffer." nil])
(defalias 'texinfo-insert-@kbd #[(&optional arg) "ÀÁ\n\"‡" [texinfo-insert-@-with-arg "kbd" arg] 3 "\
Insert a `@kbd{...}' command in a Texinfo buffer.
A numeric argument says how many words the braces should surround.
The default is not to surround any existing words with the braces." "P"])
(defalias 'texinfo-insert-@node #[nil "ÀcˆÁyˆÂu‡" ["@node \n@comment  node-name,  next,  previous,  up" -1 6] 1 "\
Insert the string `@node' in a Texinfo buffer.
This also inserts on the following line a comment indicating
the order of arguments to @node." nil])
(defalias 'texinfo-insert-@noindent #[nil "Àc‡" ["@noindent\n"] 1 "\
Insert the string `@noindent' in a Texinfo buffer." nil])
(defalias 'texinfo-insert-@samp #[(&optional arg) "ÀÁ\n\"‡" [texinfo-insert-@-with-arg "samp" arg] 3 "\
Insert a `@samp{...}' command in a Texinfo buffer.
A numeric argument says how many words the braces should surround.
The default is not to surround any existing words with the braces." "P"])
(defalias 'texinfo-insert-@table #[(&optional arg) "Àc‡" ["@table "] 1 "\
Insert the string `@table' in a Texinfo buffer." "P"])
(defalias 'texinfo-insert-@var #[(&optional arg) "ÀÁ\n\"‡" [texinfo-insert-@-with-arg "var" arg] 3 "\
Insert a `@var{}' command in a Texinfo buffer.
A numeric argument says how many words the braces should surround.
The default is not to surround any existing words with the braces." "P"])
(defalias 'texinfo-show-structure #[(&optional nodes-too) "ÀÁ!ˆŠebˆ\nƒ ÃÄP!ˆ‚ Ã!ˆ)ÆÇ!ˆebˆÈÉ!ˆdbˆÊÌÍÎÏ#…| ÐÑ!ˆÒÓÕQ!ƒE Ê‚q ÒÓÕQ!ƒS ×‚q ÒÓÕQ!ƒa Ù‚q ÒÓÕQ!ƒo Û‚q ‰jˆÏyˆ‚+ )‡" [require texnfo-upd nodes-too occur "\\(^@node\\)\\|" texinfo-section-types-regexp pop-to-buffer "*Occur*" flush-lines "-----" 5 margin re-search-backward "^ *[0-9]*:" nil 0 re-search-forward ":" looking-at "@\\(" texinfo-chapter-level-regexp "\\)" texinfo-section-level-regexp 9 texinfo-subsection-level-regexp 13 texinfo-subsubsection-level-regexp 17] 5 "\
Show the structure of a Texinfo file.
List the lines in the file that begin with the @-sign commands for
@chapter, @section, and the like.

With optional argument (prefix if interactive), list both the lines
with @-sign commands for @chapter, @section, and the like, and list
@node lines.

Lines with structuring commands beginning in them are displayed in
another buffer named `*Occur*'.  In that buffer, you can move point to
one of those lines and then use \\<occur-mode-map>\\[occur-mode-goto-occurrence], 
to jump to the corresponding spot in the Texinfo source file." "P"])
(defvar texinfo-texi2dvi-command "texi2dvi" "\
*Command used by `texinfo-tex-buffer' to run TeX and texindex on a buffer.")
(defvar texinfo-tex-command "tex" "\
*Command used by `texinfo-tex-region' to run TeX on a region.")
(defvar texinfo-texindex-command "texindex" "\
*Command used by `texinfo-texindex' to sort unsorted index files.")
(defvar texinfo-delete-from-print-queue-command "lprm" "\
*Command string used to delete a job from the line printer queue.
Command is used by \\[texinfo-delete-from-print-queue] based on
number provided by a previous \\[tex-show-print-queue]
command.")
(defvar texinfo-tex-trailer "@bye" "\
String appended after a region sent to TeX by `texinfo-tex-region'.")
(defalias 'texinfo-tex-region #[(beg end) "ÀÁ!ˆÂÃ!ƒ Ä ˆ‚ Å ˆ„ ÇÈ!ÉPÊË!ÌÍ!!ŠŒ~ˆebˆÒyˆ`eeebˆ×`ŠØˆ`)Ø‰%ˆÙyˆ`Wƒe `ÛÝ#ƒŠ Þyˆ`ÛØÝ#ƒ‡ Þyˆ`‚Š e×^ÝØ%ˆ×] ÝØ%ˆ,!\"qˆã ˆäå!ˆ\"ƒÀ ä\"!ˆæ\"ˆ×edÝØ%ˆ+æÃ\"ˆç(\"ˆç)\"ˆ+êÞ!‡" [require tex-mode get-buffer "*tex-shell*" tex-kill-job tex-start-shell tex-zap-file make-temp-name "#tz" ".tex" get-buffer-create " tex-Output-Buffer" file-name-as-directory expand-file-name tex-directory zap-directory temp-buffer tex-out-file 100 default-directory hend hbeg search-end write-region nil 1 beg search-forward tex-start-of-header t 0 tex-end-of-header end texinfo-tex-trailer local-tex-trailer erase-buffer insert-string "\n" tex-set-buffer-directory tex-send-command tex-shell-cd-command texinfo-tex-command tex-recenter-output-buffer] 6 "\
Run TeX on the current region.
This works by writing a temporary file (`tex-zap-file') in the directory
that is the value of `tex-directory', then running TeX on that file.

The first line of the buffer is copied to the
temporary file; and if the buffer has a header, it is written to the
temporary file before the region itself.  The buffer's header is all lines
between the strings defined by `tex-start-of-header' and `tex-end-of-header'
inclusive.  The header must start in the first 100 lines.

The value of `texinfo-tex-trailer' is appended to the temporary file after the region." "r"])
(defalias 'texinfo-tex-buffer #[nil "ÀÁ!ˆÂÃ!ƒ ÄÅÆ!Ç\"ˆ‚ È ˆ	„# ÊË!ˆ‚, Ì ƒ, ÊÍ!ˆ	ÏÑ!\"ˆÏ\"ˆÓÔ!‡" [require tex-mode get-buffer "*tex-shell*" quit-process get-process "tex-shell" t tex-start-shell buffer-file-name error "Buffer not visiting any file!" buffer-modified-p "Buffer has been modified since last saved!" tex-zap-file tex-send-command tex-shell-cd-command file-name-directory texinfo-texi2dvi-command tex-recenter-output-buffer 0] 4 "\
Run TeX on visited file, once or twice, to make a correct `.dvi' file." nil])
(defalias 'texinfo-texindex #[nil "ÀÁ!ˆÂ\fÅP\"ˆÆÇ!‡" [require tex-mode tex-send-command texinfo-texindex-command tex-zap-file ".??" tex-recenter-output-buffer nil] 4 "\
Run `texindex' on unsorted index files.
The index files are made by \\[texinfo-tex-region] or \\[texinfo-tex-buffer].
This runs the shell command defined by `texinfo-texindex-command'." nil])
(defalias 'texinfo-tex-print #[nil "ÀÁ!ˆÂ\fÅP\"ˆÆÇ!‡" [require tex-mode tex-send-command tex-dvi-print-command tex-zap-file ".dvi" tex-recenter-output-buffer nil] 4 "\
Print `.dvi' file made by \\[texinfo-tex-region] or \\[texinfo-tex-buffer].
This runs the shell command defined by `tex-dvi-print-command'." nil])
(defalias 'texinfo-quit-job #[nil "ÀÁ!„\n ÂÃ!ˆÄÅ!‡" [get-process "tex-shell" error "No TeX shell running" tex-send-command "x"] 2 "\
Quit currently running TeX job, by sending an `x' to it." nil])
(defalias 'texinfo-delete-from-print-queue #[(job-number) "ÀÁ!ˆÂ ƒ Ã ˆ‚ Ä ˆÅ\"ˆÈÉ!‡" [require tex-mode tex-shell-running tex-kill-job tex-start-shell tex-send-command texinfo-delete-from-print-queue-command job-number tex-recenter-output-buffer nil] 3 "\
Delete job from the line printer spooling queue.
You are prompted for the job number (use a number shown by a previous
\\[texinfo-show-print-queue] command)." "nPrinter job number for deletion: "])
(provide (quote texinfo))