/*
 * Generated by gdbus-codegen 2.29.5. DO NOT EDIT.
 *
 * The license of this code is the same as for the source it was derived from.
 */

#ifdef HAVE_CONFIG_H
#  include "config.h"
#endif

#include "dtm.h"

typedef struct
{
  GDBusArgInfo parent_struct;
  gboolean use_gvariant;
} _ExtendedGDBusArgInfo;

typedef struct
{
  GDBusMethodInfo parent_struct;
  const gchar *signal_name;
} _ExtendedGDBusMethodInfo;

typedef struct
{
  GDBusSignalInfo parent_struct;
  const gchar *signal_name;
} _ExtendedGDBusSignalInfo;

typedef struct
{
  GDBusPropertyInfo parent_struct;
  const gchar *hyphen_name;
  gboolean use_gvariant;
} _ExtendedGDBusPropertyInfo;

typedef struct
{
  GDBusInterfaceInfo parent_struct;
  const gchar *hyphen_name;
} _ExtendedGDBusInterfaceInfo;

typedef struct
{
  const _ExtendedGDBusPropertyInfo *info;
  guint prop_id;
  GValue orig_value; /* the value before the change */
} ChangedProperty;

static void
_changed_property_free (ChangedProperty *data)
{
  g_value_unset (&data->orig_value);
  g_free (data);
}

static gboolean
_g_strv_equal0 (gchar **a, gchar **b)
{
  gboolean ret = FALSE;
  guint n;
  if (a == NULL && b == NULL)
    {
      ret = TRUE;
      goto out;
    }
  if (a == NULL || b == NULL)
    goto out;
  if (g_strv_length (a) != g_strv_length (b))
    goto out;
  for (n = 0; a[n] != NULL; n++)
    if (g_strcmp0 (a[n], b[n]) != 0)
      goto out;
  ret = TRUE;
out:
  return ret;
}

static gboolean
_g_variant_equal0 (GVariant *a, GVariant *b)
{
  gboolean ret = FALSE;
  if (a == NULL && b == NULL)
    {
      ret = TRUE;
      goto out;
    }
  if (a == NULL || b == NULL)
    goto out;
  ret = g_variant_equal (a, b);
out:
  return ret;
}

G_GNUC_UNUSED static gboolean
_g_value_equal (const GValue *a, const GValue *b)
{
  gboolean ret = FALSE;
  g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b));
  switch (G_VALUE_TYPE (a))
    {
      case G_TYPE_BOOLEAN:
        ret = (g_value_get_boolean (a) == g_value_get_boolean (b));
        break;
      case G_TYPE_UCHAR:
        ret = (g_value_get_uchar (a) == g_value_get_uchar (b));
        break;
      case G_TYPE_INT:
        ret = (g_value_get_int (a) == g_value_get_int (b));
        break;
      case G_TYPE_UINT:
        ret = (g_value_get_uint (a) == g_value_get_uint (b));
        break;
      case G_TYPE_INT64:
        ret = (g_value_get_int64 (a) == g_value_get_int64 (b));
        break;
      case G_TYPE_UINT64:
        ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b));
        break;
      case G_TYPE_DOUBLE:
        ret = (g_value_get_double (a) == g_value_get_double (b));
        break;
      case G_TYPE_STRING:
        ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0);
        break;
      case G_TYPE_VARIANT:
        ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b));
        break;
      default:
        if (G_VALUE_TYPE (a) == G_TYPE_STRV)
          ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b));
        else
          g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a)));
        break;
    }
  return ret;
}

/* ------------------------------------------------------------------------
 * Code for interface org.cinnamon.SettingsDaemon.DateTimeMechanism
 * ------------------------------------------------------------------------
 */

/**
 * SECTION:DateTimeMechanism
 * @title: DateTimeMechanism
 * @short_description: Generated C code for the org.cinnamon.SettingsDaemon.DateTimeMechanism D-Bus interface
 *
 * This section contains code for working with the <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link> D-Bus interface in C.
 */

/* ---- Introspection data for org.cinnamon.SettingsDaemon.DateTimeMechanism ---- */

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_timezone_IN_ARG_tz =
{
  {
    -1,
    "tz",
    "s",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_set_timezone_IN_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_set_timezone_IN_ARG_tz,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_set_timezone_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_set_timezone_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_set_timezone_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_set_timezone =
{
  {
    -1,
    "SetTimezone",
    (GDBusArgInfo **) &_date_time_mechanism_method_info_set_timezone_IN_ARG_pointers,
    NULL,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_set_timezone_annotation_info_pointers
  },
  "handle-set-timezone"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_get_timezone_OUT_ARG_timezone =
{
  {
    -1,
    "timezone",
    "s",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_get_timezone_OUT_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_get_timezone_OUT_ARG_timezone,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_get_timezone_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_get_timezone_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_get_timezone_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_get_timezone =
{
  {
    -1,
    "GetTimezone",
    NULL,
    (GDBusArgInfo **) &_date_time_mechanism_method_info_get_timezone_OUT_ARG_pointers,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_get_timezone_annotation_info_pointers
  },
  "handle-get-timezone"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_can_set_timezone_OUT_ARG_value =
{
  {
    -1,
    "value",
    "i",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_can_set_timezone_OUT_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_can_set_timezone_OUT_ARG_value,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_can_set_timezone_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_can_set_timezone_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_can_set_timezone_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_can_set_timezone =
{
  {
    -1,
    "CanSetTimezone",
    NULL,
    (GDBusArgInfo **) &_date_time_mechanism_method_info_can_set_timezone_OUT_ARG_pointers,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_can_set_timezone_annotation_info_pointers
  },
  "handle-can-set-timezone"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_date_IN_ARG_day =
{
  {
    -1,
    "day",
    "u",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_date_IN_ARG_month =
{
  {
    -1,
    "month",
    "u",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_date_IN_ARG_year =
{
  {
    -1,
    "year",
    "u",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_set_date_IN_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_set_date_IN_ARG_day,
  &_date_time_mechanism_method_info_set_date_IN_ARG_month,
  &_date_time_mechanism_method_info_set_date_IN_ARG_year,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_set_date_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_set_date_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_set_date_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_set_date =
{
  {
    -1,
    "SetDate",
    (GDBusArgInfo **) &_date_time_mechanism_method_info_set_date_IN_ARG_pointers,
    NULL,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_set_date_annotation_info_pointers
  },
  "handle-set-date"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_time_IN_ARG_seconds_since_epoch =
{
  {
    -1,
    "seconds_since_epoch",
    "x",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_set_time_IN_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_set_time_IN_ARG_seconds_since_epoch,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_set_time_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_set_time_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_set_time_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_set_time =
{
  {
    -1,
    "SetTime",
    (GDBusArgInfo **) &_date_time_mechanism_method_info_set_time_IN_ARG_pointers,
    NULL,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_set_time_annotation_info_pointers
  },
  "handle-set-time"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_can_set_time_OUT_ARG_value =
{
  {
    -1,
    "value",
    "i",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_can_set_time_OUT_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_can_set_time_OUT_ARG_value,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_can_set_time_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_can_set_time_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_can_set_time_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_can_set_time =
{
  {
    -1,
    "CanSetTime",
    NULL,
    (GDBusArgInfo **) &_date_time_mechanism_method_info_can_set_time_OUT_ARG_pointers,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_can_set_time_annotation_info_pointers
  },
  "handle-can-set-time"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_adjust_time_IN_ARG_seconds_to_add =
{
  {
    -1,
    "seconds_to_add",
    "x",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_adjust_time_IN_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_adjust_time_IN_ARG_seconds_to_add,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_adjust_time_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_adjust_time_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_adjust_time_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_adjust_time =
{
  {
    -1,
    "AdjustTime",
    (GDBusArgInfo **) &_date_time_mechanism_method_info_adjust_time_IN_ARG_pointers,
    NULL,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_adjust_time_annotation_info_pointers
  },
  "handle-adjust-time"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_get_hardware_clock_using_utc_OUT_ARG_is_using_utc =
{
  {
    -1,
    "is_using_utc",
    "b",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_get_hardware_clock_using_utc_OUT_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_get_hardware_clock_using_utc_OUT_ARG_is_using_utc,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_get_hardware_clock_using_utc_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_get_hardware_clock_using_utc_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_get_hardware_clock_using_utc_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_get_hardware_clock_using_utc =
{
  {
    -1,
    "GetHardwareClockUsingUtc",
    NULL,
    (GDBusArgInfo **) &_date_time_mechanism_method_info_get_hardware_clock_using_utc_OUT_ARG_pointers,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_get_hardware_clock_using_utc_annotation_info_pointers
  },
  "handle-get-hardware-clock-using-utc"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_hardware_clock_using_utc_IN_ARG_is_using_utc =
{
  {
    -1,
    "is_using_utc",
    "b",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_set_hardware_clock_using_utc_IN_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_set_hardware_clock_using_utc_IN_ARG_is_using_utc,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_set_hardware_clock_using_utc_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_set_hardware_clock_using_utc_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_set_hardware_clock_using_utc_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_set_hardware_clock_using_utc =
{
  {
    -1,
    "SetHardwareClockUsingUtc",
    (GDBusArgInfo **) &_date_time_mechanism_method_info_set_hardware_clock_using_utc_IN_ARG_pointers,
    NULL,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_set_hardware_clock_using_utc_annotation_info_pointers
  },
  "handle-set-hardware-clock-using-utc"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_get_using_ntp_OUT_ARG_can_use_ntp =
{
  {
    -1,
    "can_use_ntp",
    "b",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_get_using_ntp_OUT_ARG_is_using_ntp =
{
  {
    -1,
    "is_using_ntp",
    "b",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_get_using_ntp_OUT_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_get_using_ntp_OUT_ARG_can_use_ntp,
  &_date_time_mechanism_method_info_get_using_ntp_OUT_ARG_is_using_ntp,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_get_using_ntp_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_get_using_ntp_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_get_using_ntp_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_get_using_ntp =
{
  {
    -1,
    "GetUsingNtp",
    NULL,
    (GDBusArgInfo **) &_date_time_mechanism_method_info_get_using_ntp_OUT_ARG_pointers,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_get_using_ntp_annotation_info_pointers
  },
  "handle-get-using-ntp"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_set_using_ntp_IN_ARG_is_using_ntp =
{
  {
    -1,
    "is_using_ntp",
    "b",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_set_using_ntp_IN_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_set_using_ntp_IN_ARG_is_using_ntp,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_set_using_ntp_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_set_using_ntp_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_set_using_ntp_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_set_using_ntp =
{
  {
    -1,
    "SetUsingNtp",
    (GDBusArgInfo **) &_date_time_mechanism_method_info_set_using_ntp_IN_ARG_pointers,
    NULL,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_set_using_ntp_annotation_info_pointers
  },
  "handle-set-using-ntp"
};

static const _ExtendedGDBusArgInfo _date_time_mechanism_method_info_can_set_using_ntp_OUT_ARG_value =
{
  {
    -1,
    "value",
    "i",
    NULL
  },
  FALSE
};

static const _ExtendedGDBusArgInfo * const _date_time_mechanism_method_info_can_set_using_ntp_OUT_ARG_pointers[] =
{
  &_date_time_mechanism_method_info_can_set_using_ntp_OUT_ARG_value,
  NULL
};

static const GDBusAnnotationInfo _date_time_mechanism_method_can_set_using_ntp_annotation_info_0 =
{
  -1,
  "org.freedesktop.DBus.GLib.Async",
  "",
  NULL
};

static const GDBusAnnotationInfo * const _date_time_mechanism_method_can_set_using_ntp_annotation_info_pointers[] =
{
  &_date_time_mechanism_method_can_set_using_ntp_annotation_info_0,
  NULL
};

static const _ExtendedGDBusMethodInfo _date_time_mechanism_method_info_can_set_using_ntp =
{
  {
    -1,
    "CanSetUsingNtp",
    NULL,
    (GDBusArgInfo **) &_date_time_mechanism_method_info_can_set_using_ntp_OUT_ARG_pointers,
    (GDBusAnnotationInfo **) &_date_time_mechanism_method_can_set_using_ntp_annotation_info_pointers
  },
  "handle-can-set-using-ntp"
};

static const _ExtendedGDBusMethodInfo * const _date_time_mechanism_method_info_pointers[] =
{
  &_date_time_mechanism_method_info_set_timezone,
  &_date_time_mechanism_method_info_get_timezone,
  &_date_time_mechanism_method_info_can_set_timezone,
  &_date_time_mechanism_method_info_set_date,
  &_date_time_mechanism_method_info_set_time,
  &_date_time_mechanism_method_info_can_set_time,
  &_date_time_mechanism_method_info_adjust_time,
  &_date_time_mechanism_method_info_get_hardware_clock_using_utc,
  &_date_time_mechanism_method_info_set_hardware_clock_using_utc,
  &_date_time_mechanism_method_info_get_using_ntp,
  &_date_time_mechanism_method_info_set_using_ntp,
  &_date_time_mechanism_method_info_can_set_using_ntp,
  NULL
};

static const _ExtendedGDBusInterfaceInfo _date_time_mechanism_interface_info =
{
  {
    -1,
    "org.cinnamon.SettingsDaemon.DateTimeMechanism",
    (GDBusMethodInfo **) &_date_time_mechanism_method_info_pointers,
    NULL,
    NULL,
    NULL
  },
  "date-time-mechanism",
};


/**
 * date_time_mechanism_interface_info:
 *
 * Gets a machine-readable description of the <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link> D-Bus interface.
 *
 * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
 */
GDBusInterfaceInfo *
date_time_mechanism_interface_info (void)
{
  return (GDBusInterfaceInfo *) &_date_time_mechanism_interface_info;
}



/**
 * DateTimeMechanism:
 *
 * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link>.
 */

/**
 * DateTimeMechanismIface:
 * @parent_iface: The parent interface.
 * @handle_adjust_time: Handler for the #DateTimeMechanism::handle-adjust-time signal.
 * @handle_can_set_time: Handler for the #DateTimeMechanism::handle-can-set-time signal.
 * @handle_can_set_timezone: Handler for the #DateTimeMechanism::handle-can-set-timezone signal.
 * @handle_can_set_using_ntp: Handler for the #DateTimeMechanism::handle-can-set-using-ntp signal.
 * @handle_get_hardware_clock_using_utc: Handler for the #DateTimeMechanism::handle-get-hardware-clock-using-utc signal.
 * @handle_get_timezone: Handler for the #DateTimeMechanism::handle-get-timezone signal.
 * @handle_get_using_ntp: Handler for the #DateTimeMechanism::handle-get-using-ntp signal.
 * @handle_set_date: Handler for the #DateTimeMechanism::handle-set-date signal.
 * @handle_set_hardware_clock_using_utc: Handler for the #DateTimeMechanism::handle-set-hardware-clock-using-utc signal.
 * @handle_set_time: Handler for the #DateTimeMechanism::handle-set-time signal.
 * @handle_set_timezone: Handler for the #DateTimeMechanism::handle-set-timezone signal.
 * @handle_set_using_ntp: Handler for the #DateTimeMechanism::handle-set-using-ntp signal.
 *
 * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link>.
 */

static void
date_time_mechanism_default_init (DateTimeMechanismIface *iface)
{
  /* GObject signals for incoming D-Bus method calls: */
  /**
   * DateTimeMechanism::handle-set-timezone:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   * @tz: Argument passed by remote caller.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTimezone">SetTimezone()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_set_timezone() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-set-timezone",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_set_timezone),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    2,
    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_STRING);

  /**
   * DateTimeMechanism::handle-get-timezone:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetTimezone">GetTimezone()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_get_timezone() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-get-timezone",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_get_timezone),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    1,
    G_TYPE_DBUS_METHOD_INVOCATION);

  /**
   * DateTimeMechanism::handle-can-set-timezone:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTimezone">CanSetTimezone()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_can_set_timezone() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-can-set-timezone",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_can_set_timezone),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    1,
    G_TYPE_DBUS_METHOD_INVOCATION);

  /**
   * DateTimeMechanism::handle-set-date:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   * @day: Argument passed by remote caller.
   * @month: Argument passed by remote caller.
   * @year: Argument passed by remote caller.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetDate">SetDate()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_set_date() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-set-date",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_set_date),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    4,
    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_UINT, G_TYPE_UINT, G_TYPE_UINT);

  /**
   * DateTimeMechanism::handle-set-time:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   * @seconds_since_epoch: Argument passed by remote caller.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTime">SetTime()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_set_time() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-set-time",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_set_time),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    2,
    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_INT64);

  /**
   * DateTimeMechanism::handle-can-set-time:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTime">CanSetTime()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_can_set_time() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-can-set-time",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_can_set_time),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    1,
    G_TYPE_DBUS_METHOD_INVOCATION);

  /**
   * DateTimeMechanism::handle-adjust-time:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   * @seconds_to_add: Argument passed by remote caller.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.AdjustTime">AdjustTime()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_adjust_time() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-adjust-time",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_adjust_time),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    2,
    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_INT64);

  /**
   * DateTimeMechanism::handle-get-hardware-clock-using-utc:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetHardwareClockUsingUtc">GetHardwareClockUsingUtc()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_get_hardware_clock_using_utc() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-get-hardware-clock-using-utc",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_get_hardware_clock_using_utc),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    1,
    G_TYPE_DBUS_METHOD_INVOCATION);

  /**
   * DateTimeMechanism::handle-set-hardware-clock-using-utc:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   * @is_using_utc: Argument passed by remote caller.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetHardwareClockUsingUtc">SetHardwareClockUsingUtc()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_set_hardware_clock_using_utc() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-set-hardware-clock-using-utc",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_set_hardware_clock_using_utc),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    2,
    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_BOOLEAN);

  /**
   * DateTimeMechanism::handle-get-using-ntp:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetUsingNtp">GetUsingNtp()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_get_using_ntp() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-get-using-ntp",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_get_using_ntp),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    1,
    G_TYPE_DBUS_METHOD_INVOCATION);

  /**
   * DateTimeMechanism::handle-set-using-ntp:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   * @is_using_ntp: Argument passed by remote caller.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetUsingNtp">SetUsingNtp()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_set_using_ntp() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-set-using-ntp",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_set_using_ntp),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    2,
    G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_BOOLEAN);

  /**
   * DateTimeMechanism::handle-can-set-using-ntp:
   * @object: A #DateTimeMechanism.
   * @invocation: A #GDBusMethodInvocation.
   *
   * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetUsingNtp">CanSetUsingNtp()</link> D-Bus method.
   *
   * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call date_time_mechanism_complete_can_set_using_ntp() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
   *
   * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
   */
  g_signal_new ("handle-can-set-using-ntp",
    G_TYPE_FROM_INTERFACE (iface),
    G_SIGNAL_RUN_LAST,
    G_STRUCT_OFFSET (DateTimeMechanismIface, handle_can_set_using_ntp),
    g_signal_accumulator_true_handled,
    NULL,
    g_cclosure_marshal_generic,
    G_TYPE_BOOLEAN,
    1,
    G_TYPE_DBUS_METHOD_INVOCATION);

}

typedef DateTimeMechanismIface DateTimeMechanismInterface;
G_DEFINE_INTERFACE (DateTimeMechanism, date_time_mechanism, G_TYPE_OBJECT);

/**
 * date_time_mechanism_call_set_timezone:
 * @proxy: A #DateTimeMechanismProxy.
 * @tz: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTimezone">SetTimezone()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_set_timezone_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_set_timezone_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_set_timezone (
    DateTimeMechanism *proxy,
    const gchar *tz,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "SetTimezone",
    g_variant_new ("(s)",
                   tz),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_set_timezone_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_set_timezone().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_set_timezone().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_timezone_finish (
    DateTimeMechanism *proxy,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_timezone_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @tz: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTimezone">SetTimezone()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_set_timezone() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_timezone_sync (
    DateTimeMechanism *proxy,
    const gchar *tz,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "SetTimezone",
    g_variant_new ("(s)",
                   tz),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_get_timezone:
 * @proxy: A #DateTimeMechanismProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetTimezone">GetTimezone()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_get_timezone_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_get_timezone_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_get_timezone (
    DateTimeMechanism *proxy,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "GetTimezone",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_get_timezone_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_timezone: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_get_timezone().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_get_timezone().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_get_timezone_finish (
    DateTimeMechanism *proxy,
    gchar **out_timezone,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(s)",
                 out_timezone);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_get_timezone_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_timezone: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetTimezone">GetTimezone()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_get_timezone() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_get_timezone_sync (
    DateTimeMechanism *proxy,
    gchar **out_timezone,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "GetTimezone",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(s)",
                 out_timezone);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_can_set_timezone:
 * @proxy: A #DateTimeMechanismProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTimezone">CanSetTimezone()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_can_set_timezone_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_can_set_timezone_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_can_set_timezone (
    DateTimeMechanism *proxy,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "CanSetTimezone",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_can_set_timezone_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_can_set_timezone().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_can_set_timezone().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_can_set_timezone_finish (
    DateTimeMechanism *proxy,
    gint *out_value,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(i)",
                 out_value);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_can_set_timezone_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTimezone">CanSetTimezone()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_can_set_timezone() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_can_set_timezone_sync (
    DateTimeMechanism *proxy,
    gint *out_value,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "CanSetTimezone",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(i)",
                 out_value);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_date:
 * @proxy: A #DateTimeMechanismProxy.
 * @day: Argument to pass with the method invocation.
 * @month: Argument to pass with the method invocation.
 * @year: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetDate">SetDate()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_set_date_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_set_date_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_set_date (
    DateTimeMechanism *proxy,
    guint day,
    guint month,
    guint year,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "SetDate",
    g_variant_new ("(uuu)",
                   day,
                   month,
                   year),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_set_date_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_set_date().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_set_date().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_date_finish (
    DateTimeMechanism *proxy,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_date_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @day: Argument to pass with the method invocation.
 * @month: Argument to pass with the method invocation.
 * @year: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetDate">SetDate()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_set_date() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_date_sync (
    DateTimeMechanism *proxy,
    guint day,
    guint month,
    guint year,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "SetDate",
    g_variant_new ("(uuu)",
                   day,
                   month,
                   year),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_time:
 * @proxy: A #DateTimeMechanismProxy.
 * @seconds_since_epoch: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTime">SetTime()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_set_time_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_set_time_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_set_time (
    DateTimeMechanism *proxy,
    gint64 seconds_since_epoch,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "SetTime",
    g_variant_new ("(x)",
                   seconds_since_epoch),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_set_time_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_set_time().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_set_time().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_time_finish (
    DateTimeMechanism *proxy,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_time_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @seconds_since_epoch: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTime">SetTime()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_set_time() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_time_sync (
    DateTimeMechanism *proxy,
    gint64 seconds_since_epoch,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "SetTime",
    g_variant_new ("(x)",
                   seconds_since_epoch),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_can_set_time:
 * @proxy: A #DateTimeMechanismProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTime">CanSetTime()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_can_set_time_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_can_set_time_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_can_set_time (
    DateTimeMechanism *proxy,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "CanSetTime",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_can_set_time_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_can_set_time().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_can_set_time().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_can_set_time_finish (
    DateTimeMechanism *proxy,
    gint *out_value,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(i)",
                 out_value);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_can_set_time_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTime">CanSetTime()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_can_set_time() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_can_set_time_sync (
    DateTimeMechanism *proxy,
    gint *out_value,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "CanSetTime",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(i)",
                 out_value);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_adjust_time:
 * @proxy: A #DateTimeMechanismProxy.
 * @seconds_to_add: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.AdjustTime">AdjustTime()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_adjust_time_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_adjust_time_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_adjust_time (
    DateTimeMechanism *proxy,
    gint64 seconds_to_add,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "AdjustTime",
    g_variant_new ("(x)",
                   seconds_to_add),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_adjust_time_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_adjust_time().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_adjust_time().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_adjust_time_finish (
    DateTimeMechanism *proxy,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_adjust_time_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @seconds_to_add: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.AdjustTime">AdjustTime()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_adjust_time() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_adjust_time_sync (
    DateTimeMechanism *proxy,
    gint64 seconds_to_add,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "AdjustTime",
    g_variant_new ("(x)",
                   seconds_to_add),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_get_hardware_clock_using_utc:
 * @proxy: A #DateTimeMechanismProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetHardwareClockUsingUtc">GetHardwareClockUsingUtc()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_get_hardware_clock_using_utc_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_get_hardware_clock_using_utc_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_get_hardware_clock_using_utc (
    DateTimeMechanism *proxy,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "GetHardwareClockUsingUtc",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_get_hardware_clock_using_utc_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_is_using_utc: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_get_hardware_clock_using_utc().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_get_hardware_clock_using_utc().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_get_hardware_clock_using_utc_finish (
    DateTimeMechanism *proxy,
    gboolean *out_is_using_utc,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(b)",
                 out_is_using_utc);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_get_hardware_clock_using_utc_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_is_using_utc: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetHardwareClockUsingUtc">GetHardwareClockUsingUtc()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_get_hardware_clock_using_utc() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_get_hardware_clock_using_utc_sync (
    DateTimeMechanism *proxy,
    gboolean *out_is_using_utc,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "GetHardwareClockUsingUtc",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(b)",
                 out_is_using_utc);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_hardware_clock_using_utc:
 * @proxy: A #DateTimeMechanismProxy.
 * @is_using_utc: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetHardwareClockUsingUtc">SetHardwareClockUsingUtc()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_set_hardware_clock_using_utc_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_set_hardware_clock_using_utc_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_set_hardware_clock_using_utc (
    DateTimeMechanism *proxy,
    gboolean is_using_utc,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "SetHardwareClockUsingUtc",
    g_variant_new ("(b)",
                   is_using_utc),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_set_hardware_clock_using_utc_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_set_hardware_clock_using_utc().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_set_hardware_clock_using_utc().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_hardware_clock_using_utc_finish (
    DateTimeMechanism *proxy,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_hardware_clock_using_utc_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @is_using_utc: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetHardwareClockUsingUtc">SetHardwareClockUsingUtc()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_set_hardware_clock_using_utc() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_hardware_clock_using_utc_sync (
    DateTimeMechanism *proxy,
    gboolean is_using_utc,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "SetHardwareClockUsingUtc",
    g_variant_new ("(b)",
                   is_using_utc),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_get_using_ntp:
 * @proxy: A #DateTimeMechanismProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetUsingNtp">GetUsingNtp()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_get_using_ntp_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_get_using_ntp_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_get_using_ntp (
    DateTimeMechanism *proxy,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "GetUsingNtp",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_get_using_ntp_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_can_use_ntp: (out): Return location for return parameter or %NULL to ignore.
 * @out_is_using_ntp: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_get_using_ntp().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_get_using_ntp().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_get_using_ntp_finish (
    DateTimeMechanism *proxy,
    gboolean *out_can_use_ntp,
    gboolean *out_is_using_ntp,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(bb)",
                 out_can_use_ntp,
                 out_is_using_ntp);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_get_using_ntp_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_can_use_ntp: (out): Return location for return parameter or %NULL to ignore.
 * @out_is_using_ntp: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetUsingNtp">GetUsingNtp()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_get_using_ntp() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_get_using_ntp_sync (
    DateTimeMechanism *proxy,
    gboolean *out_can_use_ntp,
    gboolean *out_is_using_ntp,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "GetUsingNtp",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(bb)",
                 out_can_use_ntp,
                 out_is_using_ntp);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_using_ntp:
 * @proxy: A #DateTimeMechanismProxy.
 * @is_using_ntp: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetUsingNtp">SetUsingNtp()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_set_using_ntp_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_set_using_ntp_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_set_using_ntp (
    DateTimeMechanism *proxy,
    gboolean is_using_ntp,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "SetUsingNtp",
    g_variant_new ("(b)",
                   is_using_ntp),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_set_using_ntp_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_set_using_ntp().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_set_using_ntp().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_using_ntp_finish (
    DateTimeMechanism *proxy,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_set_using_ntp_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @is_using_ntp: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetUsingNtp">SetUsingNtp()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_set_using_ntp() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_set_using_ntp_sync (
    DateTimeMechanism *proxy,
    gboolean is_using_ntp,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "SetUsingNtp",
    g_variant_new ("(b)",
                   is_using_ntp),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "()");
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_can_set_using_ntp:
 * @proxy: A #DateTimeMechanismProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetUsingNtp">CanSetUsingNtp()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_call_can_set_using_ntp_finish() to get the result of the operation.
 *
 * See date_time_mechanism_call_can_set_using_ntp_sync() for the synchronous, blocking version of this method.
 */
void
date_time_mechanism_call_can_set_using_ntp (
    DateTimeMechanism *proxy,
    GCancellable *cancellable,
    GAsyncReadyCallback callback,
    gpointer user_data)
{
  g_dbus_proxy_call (G_DBUS_PROXY (proxy),
    "CanSetUsingNtp",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    callback,
    user_data);
}

/**
 * date_time_mechanism_call_can_set_using_ntp_finish:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_call_can_set_using_ntp().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with date_time_mechanism_call_can_set_using_ntp().
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_can_set_using_ntp_finish (
    DateTimeMechanism *proxy,
    gint *out_value,
    GAsyncResult *res,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(i)",
                 out_value);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_call_can_set_using_ntp_sync:
 * @proxy: A #DateTimeMechanismProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetUsingNtp">CanSetUsingNtp()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_call_can_set_using_ntp() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeeded, %FALSE if @error is set.
 */
gboolean
date_time_mechanism_call_can_set_using_ntp_sync (
    DateTimeMechanism *proxy,
    gint *out_value,
    GCancellable *cancellable,
    GError **error)
{
  GVariant *_ret;
  _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
    "CanSetUsingNtp",
    g_variant_new ("()"),
    G_DBUS_CALL_FLAGS_NONE,
    -1,
    cancellable,
    error);
  if (_ret == NULL)
    goto _out;
  g_variant_get (_ret,
                 "(i)",
                 out_value);
  g_variant_unref (_ret);
_out:
  return _ret != NULL;
}

/**
 * date_time_mechanism_complete_set_timezone:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTimezone">SetTimezone()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_set_timezone (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("()"));
}

/**
 * date_time_mechanism_complete_get_timezone:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @timezone: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetTimezone">GetTimezone()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_get_timezone (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation,
    const gchar *timezone)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("(s)",
                   timezone));
}

/**
 * date_time_mechanism_complete_can_set_timezone:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @value: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTimezone">CanSetTimezone()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_can_set_timezone (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation,
    gint value)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("(i)",
                   value));
}

/**
 * date_time_mechanism_complete_set_date:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetDate">SetDate()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_set_date (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("()"));
}

/**
 * date_time_mechanism_complete_set_time:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetTime">SetTime()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_set_time (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("()"));
}

/**
 * date_time_mechanism_complete_can_set_time:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @value: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetTime">CanSetTime()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_can_set_time (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation,
    gint value)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("(i)",
                   value));
}

/**
 * date_time_mechanism_complete_adjust_time:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.AdjustTime">AdjustTime()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_adjust_time (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("()"));
}

/**
 * date_time_mechanism_complete_get_hardware_clock_using_utc:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @is_using_utc: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetHardwareClockUsingUtc">GetHardwareClockUsingUtc()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_get_hardware_clock_using_utc (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation,
    gboolean is_using_utc)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("(b)",
                   is_using_utc));
}

/**
 * date_time_mechanism_complete_set_hardware_clock_using_utc:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetHardwareClockUsingUtc">SetHardwareClockUsingUtc()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_set_hardware_clock_using_utc (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("()"));
}

/**
 * date_time_mechanism_complete_get_using_ntp:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @can_use_ntp: Parameter to return.
 * @is_using_ntp: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.GetUsingNtp">GetUsingNtp()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_get_using_ntp (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation,
    gboolean can_use_ntp,
    gboolean is_using_ntp)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("(bb)",
                   can_use_ntp,
                   is_using_ntp));
}

/**
 * date_time_mechanism_complete_set_using_ntp:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.SetUsingNtp">SetUsingNtp()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_set_using_ntp (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("()"));
}

/**
 * date_time_mechanism_complete_can_set_using_ntp:
 * @object: A #DateTimeMechanism.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @value: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org.cinnamon.SettingsDaemon-DateTimeMechanism.CanSetUsingNtp">CanSetUsingNtp()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */
void
date_time_mechanism_complete_can_set_using_ntp (
    DateTimeMechanism *object,
    GDBusMethodInvocation *invocation,
    gint value)
{
  g_dbus_method_invocation_return_value (invocation,
    g_variant_new ("(i)",
                   value));
}

/* ------------------------------------------------------------------------ */

/**
 * DateTimeMechanismProxy:
 *
 * The #DateTimeMechanismProxy structure contains only private data and should only be accessed using the provided API.
 */

/**
 * DateTimeMechanismProxyClass:
 * @parent_class: The parent class.
 *
 * Class structure for #DateTimeMechanismProxy.
 */

static void
date_time_mechanism_proxy_iface_init (DateTimeMechanismIface *iface)
{
}

#define date_time_mechanism_proxy_get_type date_time_mechanism_proxy_get_type
G_DEFINE_TYPE_WITH_CODE (DateTimeMechanismProxy, date_time_mechanism_proxy, G_TYPE_DBUS_PROXY,
                         G_IMPLEMENT_INTERFACE (TYPE_DATE_TIME_MECHANISM, date_time_mechanism_proxy_iface_init));
#undef date_time_mechanism_proxy_get_type

static void
date_time_mechanism_proxy_get_property (GObject      *object,
  guint         prop_id,
  GValue       *value,
  GParamSpec   *pspec)
{
}

static void
date_time_mechanism_proxy_set_property (GObject      *object,
  guint         prop_id,
  const GValue *value,
  GParamSpec   *pspec)
{
}

static void
date_time_mechanism_proxy_g_signal (GDBusProxy *proxy,
  const gchar *sender_name,
  const gchar *signal_name,
  GVariant *parameters)
{
  _ExtendedGDBusSignalInfo *info;
  GVariantIter iter;
  GVariant *child;
  GValue *paramv;
  guint num_params;
  guint n;
  guint signal_id;
  info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_date_time_mechanism_interface_info, signal_name);
  if (info == NULL)
    return;
  num_params = g_variant_n_children (parameters);
  paramv = g_new0 (GValue, num_params + 1);
  g_value_init (&paramv[0], TYPE_DATE_TIME_MECHANISM);
  g_value_set_object (&paramv[0], proxy);
  g_variant_iter_init (&iter, parameters);
  n = 1;
  while ((child = g_variant_iter_next_value (&iter)) != NULL)
    {
      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
      if (arg_info->use_gvariant)
        {
          g_value_init (&paramv[n], G_TYPE_VARIANT);
          g_value_set_variant (&paramv[n], child);
          n++;
        }
      else
        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
      g_variant_unref (child);
    }
  signal_id = g_signal_lookup (info->signal_name, TYPE_DATE_TIME_MECHANISM);
  g_signal_emitv (paramv, signal_id, 0, NULL);
  for (n = 0; n < num_params + 1; n++)
    g_value_unset (&paramv[n]);
  g_free (paramv);
}

static void
date_time_mechanism_proxy_g_properties_changed (GDBusProxy *proxy,
  GVariant *changed_properties,
  const gchar *const *invalidated_properties)
{
  guint n;
  const gchar *key;
  GVariantIter *iter;
  _ExtendedGDBusPropertyInfo *info;
  g_variant_get (changed_properties, "a{sv}", &iter);
  while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
    {
      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_date_time_mechanism_interface_info, key);
      if (info != NULL)
        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
    }
  g_variant_iter_free (iter);
  for (n = 0; invalidated_properties[n] != NULL; n++)
    {
      info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_date_time_mechanism_interface_info, invalidated_properties[n]);
      if (info != NULL)
        g_object_notify (G_OBJECT (proxy), info->hyphen_name);
    }
}

static void
date_time_mechanism_proxy_init (DateTimeMechanismProxy *proxy)
{
  g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), date_time_mechanism_interface_info ());
}

static void
date_time_mechanism_proxy_class_init (DateTimeMechanismProxyClass *klass)
{
  GObjectClass *gobject_class;
  GDBusProxyClass *proxy_class;

  gobject_class = G_OBJECT_CLASS (klass);
  gobject_class->get_property = date_time_mechanism_proxy_get_property;
  gobject_class->set_property = date_time_mechanism_proxy_set_property;

  proxy_class = G_DBUS_PROXY_CLASS (klass);
  proxy_class->g_signal = date_time_mechanism_proxy_g_signal;
  proxy_class->g_properties_changed = date_time_mechanism_proxy_g_properties_changed;

}

/**
 * date_time_mechanism_proxy_new:
 * @connection: A #GDBusConnection.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link>. See g_dbus_proxy_new() for more details.
 *
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_proxy_new_finish() to get the result of the operation.
 *
 * See date_time_mechanism_proxy_new_sync() for the synchronous, blocking version of this constructor.
 */
void
date_time_mechanism_proxy_new (
    GDBusConnection     *connection,
    GDBusProxyFlags      flags,
    const gchar         *name,
    const gchar         *object_path,
    GCancellable        *cancellable,
    GAsyncReadyCallback  callback,
    gpointer             user_data)
{
  g_async_initable_new_async (TYPE_DATE_TIME_MECHANISM_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.cinnamon.SettingsDaemon.DateTimeMechanism", NULL);
}

/**
 * date_time_mechanism_proxy_new_finish:
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_proxy_new().
 * @error: Return location for error or %NULL
 *
 * Finishes an operation started with date_time_mechanism_proxy_new().
 *
 * Returns: (transfer full) (type DateTimeMechanismProxy): The constructed proxy object or %NULL if @error is set.
 */
DateTimeMechanism *
date_time_mechanism_proxy_new_finish (
    GAsyncResult        *res,
    GError             **error)
{
  GObject *ret;
  GObject *source_object;
  source_object = g_async_result_get_source_object (res);
  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
  g_object_unref (source_object);
  if (ret != NULL)
    return DATE_TIME_MECHANISM (ret);
  else
    return NULL;
}

/**
 * date_time_mechanism_proxy_new_sync:
 * @connection: A #GDBusConnection.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL
 *
 * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link>. See g_dbus_proxy_new_sync() for more details.
 *
 * The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_proxy_new() for the asynchronous version of this constructor.
 *
 * Returns: (transfer full) (type DateTimeMechanismProxy): The constructed proxy object or %NULL if @error is set.
 */
DateTimeMechanism *
date_time_mechanism_proxy_new_sync (
    GDBusConnection     *connection,
    GDBusProxyFlags      flags,
    const gchar         *name,
    const gchar         *object_path,
    GCancellable        *cancellable,
    GError             **error)
{
  GInitable *ret;
  ret = g_initable_new (TYPE_DATE_TIME_MECHANISM_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.cinnamon.SettingsDaemon.DateTimeMechanism", NULL);
  if (ret != NULL)
    return DATE_TIME_MECHANISM (ret);
  else
    return NULL;
}


/**
 * date_time_mechanism_proxy_new_for_bus:
 * @bus_type: A #GBusType.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: A bus name (well-known or unique).
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: User data to pass to @callback.
 *
 * Like date_time_mechanism_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
 *
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call date_time_mechanism_proxy_new_for_bus_finish() to get the result of the operation.
 *
 * See date_time_mechanism_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
 */
void
date_time_mechanism_proxy_new_for_bus (
    GBusType             bus_type,
    GDBusProxyFlags      flags,
    const gchar         *name,
    const gchar         *object_path,
    GCancellable        *cancellable,
    GAsyncReadyCallback  callback,
    gpointer             user_data)
{
  g_async_initable_new_async (TYPE_DATE_TIME_MECHANISM_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.cinnamon.SettingsDaemon.DateTimeMechanism", NULL);
}

/**
 * date_time_mechanism_proxy_new_for_bus_finish:
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to date_time_mechanism_proxy_new_for_bus().
 * @error: Return location for error or %NULL
 *
 * Finishes an operation started with date_time_mechanism_proxy_new_for_bus().
 *
 * Returns: (transfer full) (type DateTimeMechanismProxy): The constructed proxy object or %NULL if @error is set.
 */
DateTimeMechanism *
date_time_mechanism_proxy_new_for_bus_finish (
    GAsyncResult        *res,
    GError             **error)
{
  GObject *ret;
  GObject *source_object;
  source_object = g_async_result_get_source_object (res);
  ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
  g_object_unref (source_object);
  if (ret != NULL)
    return DATE_TIME_MECHANISM (ret);
  else
    return NULL;
}

/**
 * date_time_mechanism_proxy_new_for_bus_sync:
 * @bus_type: A #GBusType.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: A bus name (well-known or unique).
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL
 *
 * Like date_time_mechanism_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
 *
 * The calling thread is blocked until a reply is received.
 *
 * See date_time_mechanism_proxy_new_for_bus() for the asynchronous version of this constructor.
 *
 * Returns: (transfer full) (type DateTimeMechanismProxy): The constructed proxy object or %NULL if @error is set.
 */
DateTimeMechanism *
date_time_mechanism_proxy_new_for_bus_sync (
    GBusType             bus_type,
    GDBusProxyFlags      flags,
    const gchar         *name,
    const gchar         *object_path,
    GCancellable        *cancellable,
    GError             **error)
{
  GInitable *ret;
  ret = g_initable_new (TYPE_DATE_TIME_MECHANISM_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.cinnamon.SettingsDaemon.DateTimeMechanism", NULL);
  if (ret != NULL)
    return DATE_TIME_MECHANISM (ret);
  else
    return NULL;
}


/* ------------------------------------------------------------------------ */

/**
 * DateTimeMechanismSkeleton:
 *
 * The #DateTimeMechanismSkeleton structure contains only private data and should only be accessed using the provided API.
 */

/**
 * DateTimeMechanismSkeletonClass:
 * @parent_class: The parent class.
 *
 * Class structure for #DateTimeMechanismSkeleton.
 */

struct _DateTimeMechanismSkeletonPrivate
{
  GValueArray *properties;
  GList *changed_properties;
  GSource *changed_properties_idle_source;
  GMainContext *context;
  GMutex *lock;
};

static void
_date_time_mechanism_skeleton_handle_method_call (
  GDBusConnection *connection,
  const gchar *sender,
  const gchar *object_path,
  const gchar *interface_name,
  const gchar *method_name,
  GVariant *parameters,
  GDBusMethodInvocation *invocation,
  gpointer user_data)
{
  DateTimeMechanismSkeleton *skeleton = DATE_TIME_MECHANISM_SKELETON (user_data);
  _ExtendedGDBusMethodInfo *info;
  GVariantIter iter;
  GVariant *child;
  GValue *paramv;
  guint num_params;
  guint n;
  guint signal_id;
  GValue return_value = {0};
  info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
  g_assert (info != NULL);
  num_params = g_variant_n_children (parameters);
  paramv = g_new0 (GValue, num_params + 2);
  g_value_init (&paramv[0], TYPE_DATE_TIME_MECHANISM);
  g_value_set_object (&paramv[0], skeleton);
  g_value_init (&paramv[1], G_TYPE_DBUS_METHOD_INVOCATION);
  g_value_set_object (&paramv[1], invocation);
  g_variant_iter_init (&iter, parameters);
  n = 2;
  while ((child = g_variant_iter_next_value (&iter)) != NULL)
    {
      _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - 2];
      if (arg_info->use_gvariant)
        {
          g_value_init (&paramv[n], G_TYPE_VARIANT);
          g_value_set_variant (&paramv[n], child);
          n++;
        }
      else
        g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
      g_variant_unref (child);
    }
  signal_id = g_signal_lookup (info->signal_name, TYPE_DATE_TIME_MECHANISM);
  g_value_init (&return_value, G_TYPE_BOOLEAN);
  g_signal_emitv (paramv, signal_id, 0, &return_value);
  if (!g_value_get_boolean (&return_value))
    g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
  g_value_unset (&return_value);
  for (n = 0; n < num_params + 2; n++)
    g_value_unset (&paramv[n]);
  g_free (paramv);
}

static GVariant *
_date_time_mechanism_skeleton_handle_get_property (
  GDBusConnection *connection,
  const gchar *sender,
  const gchar *object_path,
  const gchar *interface_name,
  const gchar *property_name,
  GError **error,
  gpointer user_data)
{
  DateTimeMechanismSkeleton *skeleton = DATE_TIME_MECHANISM_SKELETON (user_data);
  GValue value = {0};
  GParamSpec *pspec;
  _ExtendedGDBusPropertyInfo *info;
  GVariant *ret;
  ret = NULL;
  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_date_time_mechanism_interface_info, property_name);
  g_assert (info != NULL);
  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
  if (pspec == NULL)
    {
      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
    }
  else
    {
      g_value_init (&value, pspec->value_type);
      g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
      ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
      g_value_unset (&value);
    }
  return ret;
}

static gboolean
_date_time_mechanism_skeleton_handle_set_property (
  GDBusConnection *connection,
  const gchar *sender,
  const gchar *object_path,
  const gchar *interface_name,
  const gchar *property_name,
  GVariant *variant,
  GError **error,
  gpointer user_data)
{
  DateTimeMechanismSkeleton *skeleton = DATE_TIME_MECHANISM_SKELETON (user_data);
  GValue value = {0};
  GParamSpec *pspec;
  _ExtendedGDBusPropertyInfo *info;
  gboolean ret;
  ret = FALSE;
  info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_date_time_mechanism_interface_info, property_name);
  g_assert (info != NULL);
  pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
  if (pspec == NULL)
    {
      g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
    }
  else
    {
      if (info->use_gvariant)
        g_value_set_variant (&value, variant);
      else
        g_dbus_gvariant_to_gvalue (variant, &value);
      g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
      g_value_unset (&value);
      ret = TRUE;
    }
  return ret;
}

static const GDBusInterfaceVTable _date_time_mechanism_skeleton_vtable =
{
  _date_time_mechanism_skeleton_handle_method_call,
  _date_time_mechanism_skeleton_handle_get_property,
  _date_time_mechanism_skeleton_handle_set_property
};

static GDBusInterfaceInfo *
date_time_mechanism_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton)
{
  return date_time_mechanism_interface_info ();
}

static GDBusInterfaceVTable *
date_time_mechanism_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton)
{
  return (GDBusInterfaceVTable *) &_date_time_mechanism_skeleton_vtable;
}

static GVariant *
date_time_mechanism_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
{
  DateTimeMechanismSkeleton *skeleton = DATE_TIME_MECHANISM_SKELETON (_skeleton);

  GVariantBuilder builder;
  guint n;
  g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
  if (_date_time_mechanism_interface_info.parent_struct.properties == NULL)
    goto out;
  for (n = 0; _date_time_mechanism_interface_info.parent_struct.properties[n] != NULL; n++)
    {
      GDBusPropertyInfo *info = _date_time_mechanism_interface_info.parent_struct.properties[n];
      if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
        {
          GVariant *value;
          value = _date_time_mechanism_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.cinnamon.SettingsDaemon.DateTimeMechanism", info->name, NULL, skeleton);
          if (value != NULL)
            {
              if (g_variant_is_floating (value))
                g_variant_ref_sink (value);
              g_variant_builder_add (&builder, "{sv}", info->name, value);
              g_variant_unref (value);
            }
        }
    }
out:
  return g_variant_builder_end (&builder);
}

static void
date_time_mechanism_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
{
}

static void
date_time_mechanism_skeleton_iface_init (DateTimeMechanismIface *iface)
{
}

#define date_time_mechanism_skeleton_get_type date_time_mechanism_skeleton_get_type
G_DEFINE_TYPE_WITH_CODE (DateTimeMechanismSkeleton, date_time_mechanism_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
                         G_IMPLEMENT_INTERFACE (TYPE_DATE_TIME_MECHANISM, date_time_mechanism_skeleton_iface_init));
#undef date_time_mechanism_skeleton_get_type

static void
date_time_mechanism_skeleton_finalize (GObject *object)
{
  DateTimeMechanismSkeleton *skeleton = DATE_TIME_MECHANISM_SKELETON (object);
  g_list_foreach (skeleton->priv->changed_properties, (GFunc) _changed_property_free, NULL);
  g_list_free (skeleton->priv->changed_properties);
  if (skeleton->priv->changed_properties_idle_source != NULL)
    g_source_destroy (skeleton->priv->changed_properties_idle_source);
  if (skeleton->priv->context != NULL)
    g_main_context_unref (skeleton->priv->context);
  g_mutex_free (skeleton->priv->lock);
  G_OBJECT_CLASS (date_time_mechanism_skeleton_parent_class)->finalize (object);
}

static void
date_time_mechanism_skeleton_init (DateTimeMechanismSkeleton *skeleton)
{
  skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_DATE_TIME_MECHANISM_SKELETON, DateTimeMechanismSkeletonPrivate);
  skeleton->priv->lock = g_mutex_new ();
  skeleton->priv->context = g_main_context_get_thread_default ();
  if (skeleton->priv->context != NULL)
    g_main_context_ref (skeleton->priv->context);
}

static void
date_time_mechanism_skeleton_class_init (DateTimeMechanismSkeletonClass *klass)
{
  GObjectClass *gobject_class;
  GDBusInterfaceSkeletonClass *skeleton_class;

  g_type_class_add_private (klass, sizeof (DateTimeMechanismSkeletonPrivate));

  gobject_class = G_OBJECT_CLASS (klass);
  gobject_class->finalize = date_time_mechanism_skeleton_finalize;

  skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
  skeleton_class->get_info = date_time_mechanism_skeleton_dbus_interface_get_info;
  skeleton_class->get_properties = date_time_mechanism_skeleton_dbus_interface_get_properties;
  skeleton_class->flush = date_time_mechanism_skeleton_dbus_interface_flush;
  skeleton_class->get_vtable = date_time_mechanism_skeleton_dbus_interface_get_vtable;
}

/**
 * date_time_mechanism_skeleton_new:
 *
 * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org.cinnamon.SettingsDaemon-DateTimeMechanism.top_of_page">org.cinnamon.SettingsDaemon.DateTimeMechanism</link>.
 *
 * Returns: (transfer full) (type DateTimeMechanismSkeleton): The skeleton object.
 */
DateTimeMechanism *
date_time_mechanism_skeleton_new (void)
{
  return DATE_TIME_MECHANISM (g_object_new (TYPE_DATE_TIME_MECHANISM_SKELETON, NULL));
}

